Correction Gang!
The construction of KX1 #1727
<http://www.kc5wa.us/kx1/1727.html> went really smooth
all the way through the build. ALL the "checks" were
well within spec's. It was even okay after adding the
30m mod with superb RX Power out was about 3watts.
Then I built and installed the ATU during the alignment
and test the first several checks on L0-L3, C0-C3,
N0-N3 were okay! When I tried to calibrate the ATU
"Nada". I noticed the PA was "HOT". So was my DL. the
SWR reading was r9.9 Power was "P0.0". Now when
checking the RX is dead. Audio (white noise)is there
and strong so is side tone... Any Ideas where to look?
RC kc5wa
_______________________________________________
Elecraft mailing list
Post to: [email protected]
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.):
http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com
