My K2/100 appears to have died in a manner of speaking. It was working perfectly up until recently. Last weekend I decided to use it. When I turned it on, the display showed the Elecraft test and then 7.167 L. That was it! There is no response to any of the buttons. The frequency cannot be changed. There is no bar graph display and no signals. It does communicate with the computer in the sense that the VFO frequency is displayed in my Log EQ program. But that is it.
Preliminary reference to the trouble shooting guide suggests there may be a problem involving U6 the big chip on the control board. But I'm not at all sure where to begin. Someone suggested I might try a reset first. I sure would appreciate any suggestions as to how to start tracking down the problem. The unit has a serial number of just over 3000. It has been only lightly used and has not been abused. So what happened is a mystery to me. Thanks for any help and suggestions. Bruce - W8FU _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
