Nick, You should never have to increase the AGC Threshold voltage above 3.8 volts. In some cases you will want to lower it a bit, but not raise it. The proper adjustment occurs near the pot maximum.
If I understand you correctly, all is well. 73, Don W3FPR > -----Original Message----- > > Interested in the posts on this. I am now working on the RF board > but at the Part 1 test I was only able to get 3.8v with R1 flat > out - can reduce volts but not increase. Was very grateful for > the quick response from Elecraft to an e mail on the topic but > these recent posts make me wonder whether I will have a problem > with no opportunity to increase voltage. If I have a problem > would rather know now as the RF board gets busier and busier! > 73 Nick G3RWF > -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.5.446 / Virus Database: 268.18.4/703 - Release Date: 2/26/2007 2:56 PM _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
