Don, Will do, tonight. Thanks for the prodding, -Pete > > From: "Don Wilhelm" <[EMAIL PROTECTED]>
> Cut about 1/8 inch off those long KDSP2 pins - do it now. The only long > pins are on the double row header side. > > If you forget to do it and install the KPA100, the shield will contact the > KDSP2 and cause damage. > > 73, > Don W3FPR > > > -----Original Message----- > > I did notice the header pins on the dspx are a little long on the > > 2x10 header, as mentioned recently on the reflector. > > I will remedy that next time I open the lid, as I am now starting > > a KPA100 (courtesy of the gang at booth 60 again) > > 73s, > > Pete > > wd4lst > > K2 5813 > > K1 2194 > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.5.441 / Virus Database: 268.17.37/682 - Release Date: 2/12/2007 > 1:23 PM > > _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
