Did you download the Windows software? If so the default display shows that you can monitor both the forward power and SWR as moving bars and with numerical readouts in their own windows.
That's the default. Then you can start pulling up other data. Clicking "REVERSE" will change the SWR bar and data window to show reverse power rather than SWR. In the SETTINGS drop-down window you can chose between having the windows display and the LEDs on the W1 display average power or peak power, and you can select Peak-Hold LED ON which does just that: the LED on the W1 representing the highest power reached will stay on. For operating convenience you can adjust the behavior of the range and power LEDs on the W1 to have them "decay" more quickly or slowly when RF drops or, if you're not interested in the W1 LEDs because you are using your computer, you can turn them off. If you want your settings to be remembered next time you use the W1, don't forget to click on SAVE in the SETTINGS drop down! Ron AC7AC -----Original Message----- Can anyone tell me what the W1 software will display other than SWR? Will it show peak power or anything else? I downloaded the software a few weeks ago and the and I could only see the SWR function. 73 Zack N8FNR _______________________________________________ Elecraft mailing list Post to: [email protected] You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
