Hello Anand,
according to the debug output you sent you did not establish any call, so I
suppose that you just
tried the video in preview mode. The windows development version makes use of
DirectDraw for video
output (if available). Its implementation right now does depend on incoming
video to display any
frame (its not really a bug but rather a missing feature that is known and will
be resolved once a
good approach has been decided upon). So DirectDraw video will work once a call
is established and
if receiving video, but not in preview mode and not when only sending video.
(Could you perhaps
check that?)
Also I think this alignment error in mpeg4 should have been fixed un June 16 I
think....
Matthias
--- Anand R Setlur <[EMAIL PROTECTED]> schrieb:
> Hello List,
>
> I was wondering if anyone else is running into the same issue as me and if
> there
> is a known/suggested workaround. With the introduction of directshow support
> in the Ekiga2 stream, my webcam works rather well there whereas I get a blank
> screen with no video when I try to compile and run the bleeding edge version
> of
> Ekiga(compiled yesterday July 2,2007) from the SVN trunk. The rest of the GUI
> works fine and even the video acts as though it is displaying something with
> suspend video/resume video but with no actual displayed output.
>
> Any insight into this issue is much appreciated.
>
> Here is the output of ekiga.exe -d 5
>
> > H.264 plugin: successfully loaded .\avcodec
> > H.264 Plugin: Found GPL process executable in
> > .\plugins\libH264_pwplugin_helper.exe
> > H.264 Plugin: Successfully created child process 3324
> > H.264 Plugin: Successfully established communication with child process
> > MPEG4 plugin: ff_check_alignment() reports failure; stack alignment is not
> > correct
> > 2007/07/03 10:55:59.555 0:01.778 ekiga Version
> > 2.1.0 by on Windows XP
> (v5.1.2600-i586) at 2007/7/3 10:55:59.555
> > 2007/07/03 10:55:59.555 0:01.778 ekiga Detected audio
> > plugins: WindowsMultimedia
> > 2007/07/03 10:55:59.555 0:01.778 ekiga Detected video
> > plugins:
> DirectShow,VideoForWindows,Picture
> > 2007/07/03 10:55:59.555 0:01.779 ekiga Detected audio
> > plugins: WindowsMultimedia
> > 2007/07/03 10:55:59.555 0:01.779 ekiga Detected video
> > plugins:
> DirectShow,VideoForWindows,Picture
> > 2007/07/03 10:55:59.555 0:01.779 ekiga PVidDirectShow
> > GetInputDeviceNames()
> > 2007/07/03 10:55:59.571 0:01.792 ekiga PVidDirectShow
> > GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:55:59.571 0:01.792 ekiga PVidDirectShow
> > GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro (VFW)'
> > 2007/07/03 10:55:59.571 0:01.792 ekiga PVidDirectShow
> > GetInputDeviceNames() No more
> video capture device
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the
> > following audio input devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin
> WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the
> > following audio output devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin
> WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the
> > following video input devices:
> Live! Cam Notebook Pro #2,Live! Cam Notebook Pro (VFW) with plugin DirectShow
> > 2007/07/03 10:55:59.696 0:01.911 ekiga Detected the
> > following audio input devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin
> WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.912 ekiga Detected the
> > following audio output devices:
> SoundMAX HD Audio,Bluetooth Audio,Bluetooth High Quality Audio with plugin
> WindowsMultimedia
> > 2007/07/03 10:55:59.696 0:01.912 ekiga Detected the
> > following video input devices:
> Live! Cam Notebook Pro #2,Live! Cam Notebook Pro (VFW) with plugin DirectShow
> >
> > (ekiga.exe:4956): Pango-WARNING **: couldn't load font "Tahoma Condensed
> > Not-Rotated 8",
> falling back to "Sans Condensed Not-Rotated 8", expect ugly output.
> >
> > (ekiga.exe:4956): Pango-WARNING **: couldn't load font "Sans Condensed
> > Not-Rotated 8", falling
> back to "Sans Not-Rotated 8", expect ugly output.
> > 2007/07/03 10:56:00.290 0:02.505 ekiga Ekiga version
> > 2.1.0
> > 2007/07/03 10:56:00.290 0:02.505 ekiga OPAL version
> > 2.3.2
> > 2007/07/03 10:56:00.290 0:02.505 ekiga PWLIB version
> > 1.11.3
> > 2007/07/03 10:56:00.290 0:02.505 ekiga GNOME support
> > disabled
> > 2007/07/03 10:56:00.290 0:02.505 ekiga Fullscreen
> > support disabled
> > 2007/07/03 10:56:00.290 0:02.506 ekiga DBUS support
> > disabled
> > 2007/07/03 10:56:00.305 0:02.531 ekiga Set TCP port
> > range to 30000:30010
> > 2007/07/03 10:56:00.305 0:02.531 ekiga Set RTP port
> > range to 5000:5059
> > 2007/07/03 10:56:00.321 0:02.531 ekiga Set UDP port
> > range to 5060:5100
> > 2007/07/03 10:56:00.321 0:02.531 ekiga OpalEP Created
> > endpoint: h323
> > 2007/07/03 10:56:00.321 0:02.531 ekiga H323 Created
> > endpoint.
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added
> > route "pc:.*=h323:<da>"
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalEP Created
> > endpoint: sip
> > 2007/07/03 10:56:00.321 0:02.532 ekiga SIP Created
> > endpoint.
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added
> > route "pc:.*=sip:<da>"
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalEP Created
> > endpoint: pc
> > 2007/07/03 10:56:00.321 0:02.532 ekiga PCSS Created
> > PC sound system endpoint.
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added
> > route "h323:.*=pc:<da>"
> > 2007/07/03 10:56:00.321 0:02.532 ekiga OpalMan Added
> > route "sip:.*=pc:<da>"
> > 2007/07/03 10:56:00.321 0:02.533 ekiga PVidDirectShow
> > GetInputDeviceNames()
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro (VFW)'
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > GetInputDeviceNames() No more
> video capture device
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > PVideoInputDevice_DirectShow:
> constructor
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > Open(Live! Cam Notebook Pro
> #2,0)
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > IsOpen()
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > InitializeCapture()
> > 2007/07/03 10:56:00.321 0:02.540 ekiga PVidDirectShow
> > Initialize_Interfaces()
> > 2007/07/03 10:56:00.462 0:02.672 ekiga PVidDirectShow
> > SetDevice(Live! Cam Notebook
> Pro #2)
> > 2007/07/03 10:56:00.462 0:02.679 ekiga PVidDirectShow
> > SetDevice() current capture
> device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:00.540 0:02.755 ekiga PVidDirectShow
> > SetDevice() This one is kept
> 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:00.555 0:02.775 ekiga PVidDirectShow
> > ListSupportedFormats()
> > 2007/07/03 10:56:00.571 0:02.781 ekiga PVidDirectShow
> > Fmt[0] = (YUV420P, 320x240,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.782 ekiga PVidDirectShow
> > Fmt[1] = (YUV420P, 640x480,
> 15fps)
> > 2007/07/03 10:56:00.571 0:02.782 ekiga PVidDirectShow
> > Fmt[2] = (YUV420P, 352x288,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow
> > Fmt[3] = (YUV420P, 176x144,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow
> > Fmt[4] = (YUV420P, 160x120,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow
> > Fmt[5] = (BGR24, 320x240,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow
> > Fmt[6] = (BGR24, 640x480,
> 15fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow
> > Fmt[7] = (BGR24, 352x288,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.783 ekiga PVidDirectShow
> > Fmt[8] = (BGR24, 176x144,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow
> > Fmt[9] = (BGR24, 160x120,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow
> > GetDefaultFormat()
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow
> > Default format is: YUV420P,
> 320x240, 30fps)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow
> > SetColourFormat(YUV420P)
> > 2007/07/03 10:56:00.571 0:02.784 ekiga PVidDirectShow
> > SetFormat("YUV420P", 320x240,
> 30fps)
> > 2007/07/03 10:56:00.571 0:02.785 ekiga PVidDirectShow
> > Using setting [0] = (YUV420P,
> 320x240, 30fps, max:30fps)
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDirectShow
> > Ok
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDev
> > SetColourFormatConverter success for
> native YUV420P
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDirectShow
> > SetFrameRate(30fps)
> > 2007/07/03 10:56:00.665 0:02.855 ekiga PVidDirectShow
> > SetFormat("YUV420P", 320x240,
> 30fps)
> > 2007/07/03 10:56:00.665 0:02.856 ekiga PVidDirectShow
> > Using setting [0] = (YUV420P,
> 320x240, 30fps, max:30fps)
> > 2007/07/03 10:56:00.665 0:02.857 ekiga PVidDirectShow
> > Ok
> > 2007/07/03 10:56:00.665 0:02.857 ekiga PVidDirectShow
> > SetFrameSize(176, 144)
> > 2007/07/03 10:56:00.665 0:02.857 ekiga PVidDirectShow
> > SetFormat("YUV420P", 176x144,
> 30fps)
> > 2007/07/03 10:56:00.665 0:02.859 ekiga PVidDirectShow
> > Using setting [3] = (YUV420P,
> 176x144, 30fps, max:30fps)
> > 2007/07/03 10:56:00.665 0:02.860 ekiga PVidDirectShow
> > Ok
> > 2007/07/03 10:56:00.665 0:02.860 ekiga PVidDirectShow
> > SetFrameSize 176x144 is
> suported in hardware
> > 2007/07/03 10:56:00.665 0:02.860 ekiga PVidDev
> > SetFrameSize to 176x144
> > 2007/07/03 10:56:00.665 0:02.861 ekiga PVidDirectShow
> > set frame size 176x144
> frameBytes=38016
> > 2007/07/03 10:56:00.665 0:02.861 ekiga PVidDirectShow
> > Start()
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev
> > SetFrameSize to 176x144
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev
> > SetColourFormatConverter, want YUV420P
> trying RGB32
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev
> > SetColourFormatConverter, want YUV420P
> trying BGR32
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev
> > SetColourFormatConverter, want YUV420P
> trying RGB24
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev
> > SetColourFormatConverter set renderer
> to RGB24
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDev
> > SetColourFormatConverter succeeded for
> YUV420P and device using RGB24
> > 2007/07/03 10:56:02.759 0:04.947 ekiga PVidDirectShow
> > IsOpen()
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow
> > GetWhiteness() = 39321
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow
> > GetBrighness() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow
> > GetColour() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow
> > GetContrast() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow
> > GetHue() = 32768
> > 2007/07/03 10:56:02.759 0:04.948 ekiga PVidDirectShow
> > GetInputDeviceNames()
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow
> > GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro #2'
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow
> > GetInputDeviceNames() Found
> this capture device 'Live! Cam Notebook Pro (VFW)'
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow
> > GetInputDeviceNames() No more
> video capture device
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow
> > PVideoInputDevice_DirectShow:
> constructor
> > 2007/07/03 10:56:02.759 0:04.958 ekiga PVidDirectShow
> > IsOpen()
> > 2007/07/03 10:56:02.774 0:04.963 Opal Liste...er:3fa6860 Listen
> > Started listening thread on
> tcp$135.185.54.110:1720
> > 2007/07/03 10:56:02.774 0:04.963 Opal Liste...er:3fa6860 Listen
> > Waiting on socket accept on
> tcp$135.185.54.110:1720
> > 2007/07/03 10:56:02.790 0:04.983 Opal Liste...er:3f6a4a8 Listen
> > Started listening thread on
> udp$135.185.54.110:5060
> > 2007/07/03 10:56:02.852 0:05.041 ekiga Detected audio
> > codecs:
>
G.711-ALaw-64k,G.711-uLaw-64k,GSM-06.10,iLBC-13k3,SpeexNB,SpeexIETFNarrow-8k,SpeexWNarrow-8k,SpeexWB,SpeexIETFWide-20.6k,SpeexWide-20.6k
> > 2007/07/03 10:56:02.930 0:05.123 ekiga Detected video
> > codecs:
> H.261,H.261-CIF,H.261-QCIF,H.264,MPEG4,MPEG4-CIF,MPEG4-QCIF
>
> > 2007/07/03 10:56:24.009 0:26.209 ekiga SIP Deleted
> > endpoint.
> > 2007/07/03 10:56:24.009 0:26.209 ekiga OpalEP sip
> > endpoint destroyed.
> > 2007/07/03 10:56:24.009 0:26.210 ekiga PCSS Deleted
> > PC sound system endpoint.
> > 2007/07/03 10:56:24.009 0:26.210 ekiga OpalEP pc
> > endpoint destroyed.
> > 2007/07/03 10:56:24.009 0:26.210 ekiga OpalMan Deleted
> > manager.
> > Compiler did not align stack variables. Libavcodec has been miscompiled
> > and may be very slow or crash. This is not a bug in libavcodec,
> > but in the compiler. Do not report crashes to FFmpeg developers.
>
>
> _______________________________________________
> Ekiga-devel-list mailing list
> [email protected]
> http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
>
__________________________________ BE A BETTER GRILLMEISTER: Jetzt Frage
stellen und einen von 44 iPods gewinnen! www.yahoo.de/clever
_______________________________________________
Ekiga-devel-list mailing list
[email protected]
http://mail.gnome.org/mailman/listinfo/ekiga-devel-list
