On Wed, Mar 11, 2020 at 12:18:50PM +0000, [email protected] wrote:
> From: Ajay Singh <[email protected]>
>
> This file describes the binding details to connect wilc1000 device. It's
> moved from staging to 'Documentation/devicetree/bindings/net/wireless'
> path.
>
> Signed-off-by: Ajay Singh <[email protected]>
> ---
> .../net/wireless/microchip,wilc1000.yaml | 72 +++++++++++++++++++
> 1 file changed, 72 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
>
> diff --git
> a/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
> b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
> new file mode 100644
> index 000000000000..bc6cc5d3f347
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/net/wireless/microchip,wilc1000.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/net/wireless/microchip,wilc1000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Microchip WILC wireless devicetree bindings
> +
> +maintainers:
> + - Adham Abozaeid <[email protected]>
> + - Ajay Singh <[email protected]>
> +
> +description:
> + The wilc1000 chips can be connected via SPI or SDIO. This document
> + describes the binding to connect wilc devices.
> +
> +properties:
> + compatible:
> + const: microchip,wilc1000
> +
> + spi-max-frequency: true
> +
> + interrupts:
> + maxItems: 1
> +
> + clocks:
> + description: phandle to the clock connected on rtc clock line.
> + maxItems: 1
> +
> + clock-names:
> + const: rtc
> +
> +required:
> + - compatible
> + - interrupts
> +
> +examples:
> + - |
> + spi1: spi@fc018000 {
spi {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + cs-gpios = <&pioB 21 0>;
Drop this. Not relevant to the example.
> + wifi@0 {
> + compatible = "microchip,wilc1000";
> + spi-max-frequency = <48000000>;
> + reg = <0>;
> + interrupt-parent = <&pioC>;
> + interrupts = <27 0>;
> + clocks = <&pck1>;
> + clock-names = "rtc";
> + };
> + };
> +
> + - |
> + mmc1: mmc@fc000000 {
Drop the label. Either drop the unit address or add a 'reg' property to
match.
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
> + non-removable;
> + vmmc-supply = <&vcc_mmc1_reg>;
> + vqmmc-supply = <&vcc_3v3_reg>;
> + bus-width = <4>;
> + wifi@0 {
> + compatible = "microchip,wilc1000";
> + reg = <0>;
> + interrupt-parent = <&pioC>;
> + interrupts = <27 0>;
> + clocks = <&pck1>;
> + clock-names = "rtc";
> + };
> + };
> --
> 2.24.0
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
