On Mon, Dec 17, 2018 at 09:44:23PM +0100, Sergio Paracuellos wrote: > Add device-tree binding example of the ksz9477 switch managed in i2c mode. > > Cc: [email protected] > Signed-off-by: Sergio Paracuellos <[email protected]> > --- > Changes v3: > - No changes. Just resent patches together. > > Changes v2: > - Use generic name for label of the switch and make sure reg and @X > have the same value. > > .../devicetree/bindings/net/dsa/ksz.txt | 50 +++++++++++++++++++ > 1 file changed, 50 insertions(+) > > diff --git a/Documentation/devicetree/bindings/net/dsa/ksz.txt > b/Documentation/devicetree/bindings/net/dsa/ksz.txt > index 0f407fb371ce..d3c4b9d4f416 100644 > --- a/Documentation/devicetree/bindings/net/dsa/ksz.txt > +++ b/Documentation/devicetree/bindings/net/dsa/ksz.txt > @@ -74,3 +74,53 @@ Ethernet switch connected via SPI to the host, CPU port > wired to eth0: > }; > }; > }; > + > +Ethernet switch connected via I2C to the host, CPU port wired to eth0: > + > + eth0: ethernet@10001000 {
Why do we have all this indentation? Please remove. And use tab chars,
not spaces.
> + fixed-link {
> + speed = <1000>;
> + full-duplex;
> + };
> + };
> +
> + i2c0: i2c@f8008000 {
> + switch: ksz9897@5f {
> + compatible =
> "microchip,ksz9897";
> + reg = <5f>;
> +
> + ports {
> +
> #address-cells = <1>;
> +
> #size-cells = <0>;
> +
> port@0 {
> +
> reg = <0>;
> +
> label = "lan1";
> +
> };
> +
> port@1 {
> +
> reg = <1>;
> +
> label = "lan2";
> +
> };
> +
> port@2 {
> +
> reg = <2>;
> +
> label = "lan3";
> +
> };
> +
> port@3 {
> +
> reg = <3>;
> +
> label = "lan4";
> +
> };
> +
> port@4 {
> +
> reg = <4>;
> +
> label = "lan5";
> +
> };
> +
> port@6 {
> +
> reg = <6>;
> +
> label = "cpu";
> +
> ethernet = <ð0>;
> +
> fixed-link {
> +
> speed = <1000>;
> +
> full-duplex;
> +
> };
> +
> };
> + };
> + };
> + };
> --
> 2.19.1
>
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
