Hi Daniele,
On 2015.03.12 00:05, Daniele Alessandrelli wrote:
> Fix all the trivial style issues (as reported by checkpatch.pl) not requiring
> code refactoring. A following patch is expected to fix the remaining issues by
> performing some code refactoring.
>
> Signed-off-by: Daniele Alessandrelli <[email protected]>
> ---
> drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c | 199
> +++++++++++++----------
> 1 file changed, 110 insertions(+), 89 deletions(-)
>
> ==Changelog==
>
> v4: updated to leatest Greg's tree (and added changelog)
>
> v3: resent (unchanged) because of error in the other patch of the patchset
>
> v2: updated to apply cleanly to Greg's tree
>
> v1: initial realease
>
> diff --git a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> index bc959ff..5ff4da8 100644
> --- a/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> +++ b/drivers/staging/ft1000/ft1000-pcmcia/ft1000_hw.c
> @@ -28,8 +28,8 @@
> #include <linux/timer.h>
> #include <linux/interrupt.h>
> #include <linux/in.h>
> -#include <asm/io.h>
> -#include <asm/bitops.h>
> +#include <linux/io.h>
> +#include <linux/bitops.h>
>
> #include <linux/netdevice.h>
> #include <linux/etherdevice.h>
> @@ -67,8 +67,7 @@ static void ft1000_disable_interrupts(struct net_device
> *dev);
>
> /* new kernel */
> MODULE_AUTHOR("");
> -MODULE_DESCRIPTION
> -("Support for Flarion Flash OFDM NIC Device. Support for PCMCIA when used
> with ft1000_cs.");
> +MODULE_DESCRIPTION("Support for Flarion Flash OFDM NIC Device. Support for
> PCMCIA when used with ft1000_cs.");
> MODULE_LICENSE("GPL");
> MODULE_SUPPORTED_DEVICE("FT1000");
>
> @@ -267,7 +266,8 @@ void ft1000_write_dpram_mag_32(struct net_device *dev,
> int offset, u32 value)
> /*---------------------------------------------------------------------------
>
> Function: ft1000_enable_interrupts
> - Description: This function will enable interrupts base on the current
> interrupt mask.
> + Description: This function will enable interrupts base on the current
> + interrupt mask.
> Input:
> dev - device structure
> Output:
> @@ -375,7 +375,8 @@ static int ft1000_reset_card(struct net_device *dev)
> /* Make sure we free any memory reserve for provisioning */
> while (list_empty(&info->prov_list) == 0) {
> pr_debug("deleting provisioning record\n");
> - ptr = list_entry(info->prov_list.next, struct prov_record,
> list);
> + ptr = list_entry(info->prov_list.next, struct prov_record,
> + list);
> list_del(&ptr->list);
> kfree(ptr->pprov_data);
> kfree(ptr);
> @@ -406,7 +407,8 @@ static int ft1000_reset_card(struct net_device *dev)
> FT1000_DPRAM_MAG_RX_BASE);
> for (i = 0; i < MAX_DSP_SESS_REC / 2; i++) {
> info->DSPSess.MagRec[i] =
> - inl(dev->base_addr +
> FT1000_REG_MAG_DPDATA);
> + inl(dev->base_addr
> + + FT1000_REG_MAG_DPDATA);
> }
> }
> spin_unlock_irqrestore(&info->dpram_lock, flags);
> @@ -435,11 +437,12 @@ static int ft1000_reset_card(struct net_device *dev)
> mdelay(10);
> pr_debug("Take DSP out of reset\n");
>
> - /* Wait for 0xfefe indicating dsp ready before starting
> download */
> + /* Wait for 0xfefe indicating dsp ready before starting
> + * download */
Minor nitpick: multi-line comments beggining /* and ending */ go on
seperate lines. You can see this style used later in unchanged places
visible in this patch.
> for (i = 0; i < 50; i++) {
> - tempword =
> - ft1000_read_dpram_mag_16(dev,
> FT1000_MAG_DPRAM_FEFE,
> -
> FT1000_MAG_DPRAM_FEFE_INDX);
> + tempword = ft1000_read_dpram_mag_16(dev,
> + FT1000_MAG_DPRAM_FEFE,
> + FT1000_MAG_DPRAM_FEFE_INDX);
> if (tempword == 0xfefe)
> break;
> mdelay(20);
> @@ -466,8 +469,8 @@ static int ft1000_reset_card(struct net_device *dev)
>
> if (info->AsicID == ELECTRABUZZ_ID) {
> /*
> - * Need to initialize the FIFO length counter to zero in order
> to sync up
> - * with the DSP
> + * Need to initialize the FIFO length counter to zero in order
> + * to sync up with the DSP
> */
> info->fifo_cnt = 0;
> ft1000_write_dpram(dev, FT1000_FIFO_LEN, info->fifo_cnt);
> @@ -664,8 +667,8 @@ static void ft1000_hbchk(u_long data)
> return;
> }
> /*
> - * Set dedicated area to hi and ring appropriate doorbell
> according
> - * to hi/ho heartbeat protocol
> + * Set dedicated area to hi and ring appropriate doorbell
> + * according to hi/ho heartbeat protocol
> */
> if (info->AsicID == ELECTRABUZZ_ID) {
> ft1000_write_dpram(dev, FT1000_HI_HO, hi);
> @@ -687,13 +690,15 @@ static void ft1000_hbchk(u_long data)
> if (info->AsicID == ELECTRABUZZ_ID)
> ft1000_write_dpram(dev, FT1000_HI_HO, hi);
> else
> - ft1000_write_dpram_mag_16(dev,
> FT1000_MAG_HI_HO, hi_mag, FT1000_MAG_HI_HO_INDX);
> + ft1000_write_dpram_mag_16(dev, FT1000_MAG_HI_HO,
> + hi_mag, FT1000_MAG_HI_HO_INDX);
>
> if (info->AsicID == ELECTRABUZZ_ID)
> tempword = ft1000_read_dpram(dev, FT1000_HI_HO);
> else
> - tempword = ntohs(ft1000_read_dpram_mag_16(dev,
> FT1000_MAG_HI_HO, FT1000_MAG_HI_HO_INDX));
> -
> + tempword = ntohs(ft1000_read_dpram_mag_16(dev,
> + FT1000_MAG_HI_HO,
> + FT1000_MAG_HI_HO_INDX));
> }
>
> if (tempword != hi) {
> @@ -755,7 +760,8 @@ static void ft1000_hbchk(u_long data)
> Output:
>
> -------------------------------------------------------------------------*/
> -static void ft1000_send_cmd(struct net_device *dev, u16 *ptempbuffer, int
> size, u16 qtype)
> +static void ft1000_send_cmd(struct net_device *dev, u16 *ptempbuffer, int
> size,
> + u16 qtype)
> {
> struct ft1000_info *info = netdev_priv(dev);
> int i;
> @@ -849,12 +855,12 @@ static bool ft1000_receive_cmd(struct net_device *dev,
> u16 *pbuffer,
> unsigned long flags;
>
> if (info->AsicID == ELECTRABUZZ_ID) {
> - size = (ft1000_read_dpram(dev, *pnxtph)) + sizeof(struct
> pseudo_hdr);
> + size = (ft1000_read_dpram(dev, *pnxtph))
> + + sizeof(struct pseudo_hdr);
Is there any reason that ft1000_read_dpram() is in parantheses?
> } else {
> - size =
> - ntohs(ft1000_read_dpram_mag_16
> - (dev, FT1000_MAG_PH_LEN,
> - FT1000_MAG_PH_LEN_INDX)) + sizeof(struct
> pseudo_hdr);
> + size = ntohs(ft1000_read_dpram_mag_16(dev, FT1000_MAG_PH_LEN,
> + FT1000_MAG_PH_LEN_INDX))
> + + sizeof(struct pseudo_hdr);
> }
> if (size > maxsz) {
> pr_debug("Invalid command length = %d\n", size);
> @@ -955,7 +961,8 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
>
> if (ft1000_receive_cmd(dev, &cmdbuffer[0], MAX_CMD_SQSIZE, &tempword)) {
>
> - /* Get the message type which is total_len + PSEUDO header +
> msgtype + message body */
> + /* Get the message type which is total_len + PSEUDO header
> + * + msgtype + message body */
Same comment about comment style.
> pdrvmsg = (struct drv_msg *)&cmdbuffer[0];
> msgtype = ntohs(pdrvmsg->type);
> pr_debug("Command message type = 0x%x\n", msgtype);
> @@ -966,8 +973,8 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> while (list_empty(&info->prov_list) == 0) {
> pr_debug("Sending a provisioning message\n");
> /* Make sure SLOWQ doorbell is clear */
> - tempword =
> - ft1000_read_reg(dev,
> FT1000_REG_DOORBELL);
> + tempword = ft1000_read_reg(dev,
> + FT1000_REG_DOORBELL);
> i = 0;
> while (tempword & FT1000_DB_DPRAM_TX) {
> mdelay(5);
> @@ -975,9 +982,8 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> if (i == 10)
> break;
> }
> - ptr =
> - list_entry(info->prov_list.next,
> - struct prov_record, list);
> + ptr = list_entry(info->prov_list.next,
> + struct prov_record, list);
> len = *(u16 *)ptr->pprov_data;
> len = htons(len);
>
> @@ -996,14 +1002,15 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> ppseudo_hdr->checksum);
> }
>
> - ft1000_send_cmd(dev, (u16 *)ptr->pprov_data,
> len, SLOWQ_TYPE);
> + ft1000_send_cmd(dev, (u16 *)ptr->pprov_data,
> + len, SLOWQ_TYPE);
> list_del(&ptr->list);
> kfree(ptr->pprov_data);
> kfree(ptr);
> }
> /*
> - * Indicate adapter is ready to take application
> messages after all
> - * provisioning messages are sent
> + * Indicate adapter is ready to take application
> + * messages after all provisioning messages are sent
> */
> info->CardReady = 1;
> break;
> @@ -1091,8 +1098,8 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);
> if (tempword & FT1000_DB_DPRAM_TX) {
> mdelay(10);
> - tempword =
> - ft1000_read_reg(dev,
> FT1000_REG_DOORBELL);
> + tempword = ft1000_read_reg(dev,
> + FT1000_REG_DOORBELL);
> if (tempword & FT1000_DB_DPRAM_TX)
> mdelay(10);
> }
> @@ -1127,7 +1134,9 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> info->DSPInfoBlk[8] = 0x7200;
> info->DSPInfoBlk[9] =
> htons(info->DSPInfoBlklen);
> - ft1000_send_cmd(dev, (u16 *)info->DSPInfoBlk,
> (u16)(info->DSPInfoBlklen+4), 0);
> + ft1000_send_cmd(dev, (u16 *)info->DSPInfoBlk,
> + (u16)(info->DSPInfoBlklen+4),
> + 0);
> }
>
> break;
> @@ -1141,8 +1150,8 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> tempword = ft1000_read_reg(dev, FT1000_REG_DOORBELL);
> if (tempword & FT1000_DB_DPRAM_TX) {
> mdelay(10);
> - tempword =
> - ft1000_read_reg(dev,
> FT1000_REG_DOORBELL);
> + tempword = ft1000_read_reg(dev,
> + FT1000_REG_DOORBELL);
> if (tempword & FT1000_DB_DPRAM_TX)
> mdelay(10);
> }
> @@ -1188,7 +1197,8 @@ static void ft1000_proc_drvmsg(struct net_device *dev)
> *pmsg++ = convert.wrd;
> *pmsg++ = htons(info->DrvErrNum);
>
> - ft1000_send_cmd(dev, (u16 *)&tempbuffer[0],
> (u16)(0x0012), 0);
> + ft1000_send_cmd(dev, (u16 *)&tempbuffer[0],
> + (u16)(0x0012), 0);
> info->DrvErrNum = 0;
> }
>
> @@ -1279,28 +1289,28 @@ static int ft1000_parse_dpram_msg(struct net_device
> *dev)
> FT1000_MAG_TOTAL_LEN_INDX));
> }
> pr_debug("total length = %d\n", total_len);
> - if ((total_len < MAX_CMD_SQSIZE) && (total_len > sizeof(struct
> pseudo_hdr))) {
> + if ((total_len < MAX_CMD_SQSIZE)
> + && (total_len > sizeof(struct pseudo_hdr))) {
> total_len += nxtph;
> /*
> - * ft1000_read_reg will return a value that needs to be
> byteswap
> - * in order to get DSP_QID_OFFSET.
> + * ft1000_read_reg will return a value that needs to be
> + * byteswap in order to get DSP_QID_OFFSET.
> */
> if (info->AsicID == ELECTRABUZZ_ID) {
> - portid =
> - (ft1000_read_dpram
> - (dev,
> - DSP_QID_OFFSET + FT1000_DPRAM_RX_BASE
> +
> - 2) >> 8) & 0xff;
> + portid = (ft1000_read_dpram(dev, DSP_QID_OFFSET
> + + FT1000_DPRAM_RX_BASE + 2)
> + >> 8) & 0xff;
> } else {
> - portid =
> - (ft1000_read_dpram_mag_16
> - (dev, FT1000_MAG_PORT_ID,
> - FT1000_MAG_PORT_ID_INDX) & 0xff);
> + portid = (ft1000_read_dpram_mag_16(dev,
> + FT1000_MAG_PORT_ID,
> + FT1000_MAG_PORT_ID_INDX)
> + & 0xff);
Is there any reason this is in parantheses?
> }
> pr_debug("DSP_QID = 0x%x\n", portid);
>
> if (portid == DRIVERID) {
> - /* We are assumming one driver message from the
> DSP at a time. */
> + /* We are assumming one driver message from the
> + * DSP at a time. */
Same comment about multi-line comments.
> ft1000_proc_drvmsg(dev);
> }
> }
> @@ -1435,35 +1445,41 @@ static void ft1000_flush_fifo(struct net_device *dev,
> u16 DrvErrNum)
> } else {
> info->DSP_TIME[0] =
> ft1000_read_dpram_mag_16(dev,
> -
> FT1000_MAG_DSP_TIMER0,
> -
> FT1000_MAG_DSP_TIMER0_INDX);
> + FT1000_MAG_DSP_TIMER0,
> + FT1000_MAG_DSP_TIMER0_INDX);
> info->DSP_TIME[1] =
> ft1000_read_dpram_mag_16(dev,
> -
> FT1000_MAG_DSP_TIMER1,
> -
> FT1000_MAG_DSP_TIMER1_INDX);
> + FT1000_MAG_DSP_TIMER1,
> + FT1000_MAG_DSP_TIMER1_INDX);
> info->DSP_TIME[2] =
> ft1000_read_dpram_mag_16(dev,
> -
> FT1000_MAG_DSP_TIMER2,
> -
> FT1000_MAG_DSP_TIMER2_INDX);
> + FT1000_MAG_DSP_TIMER2,
> + FT1000_MAG_DSP_TIMER2_INDX);
> info->DSP_TIME[3] =
> ft1000_read_dpram_mag_16(dev,
> -
> FT1000_MAG_DSP_TIMER3,
> -
> FT1000_MAG_DSP_TIMER3_INDX);
> + FT1000_MAG_DSP_TIMER3,
> + FT1000_MAG_DSP_TIMER3_INDX);
> }
> if (tempword == 0) {
> /*
> - * Let's check if ASIC reads are still ok by
> reading the Mask register
> - * which is never zero at this point of the
> code.
> + * Let's check if ASIC reads are still ok by
> + * reading the Mask register which is never zero
> + * at this point of the code.
> */
> tempword =
> inw(dev->base_addr +
> FT1000_REG_SUP_IMASK);
> if (tempword == 0) {
> - /* This indicates that we can not
> communicate with the ASIC */
> - info->DrvErrNum =
> - FIFO_FLUSH_BADCNT;
> + /*
> + * This indicates that we can not
> + * communicate with the ASIC
> + */
> + info->DrvErrNum = FIFO_FLUSH_BADCNT;
> } else {
> - /* Let's assume that we really flush
> the FIFO */
> + /*
> + * Let's assume that we really flush
> + * the FIFO
> + */
You are using the correct comment style here :) Make them consistent
atleast in this patch.
> pcmcia->PktIntfErr++;
> return;
> }
> @@ -1549,7 +1565,6 @@ static int ft1000_copy_up_pkt(struct net_device *dev)
> skb = dev_alloc_skb(len + 12 + 2);
>
> if (skb == NULL) {
> - pr_debug("No Network buffers available\n");
> /* Read High word to complete 32 bit access */
> if (info->AsicID == MAGNEMITE_ID)
> tempword = ft1000_read_reg(dev, FT1000_REG_MAG_DFRH);
> @@ -1670,7 +1685,8 @@ static int ft1000_copy_up_pkt(struct net_device *dev)
> info->stats.rx_bytes += (len + 12);
>
> if (info->AsicID == ELECTRABUZZ_ID) {
> - /* track how many bytes have been read from FIFO - round up to
> 16 bit word */
> + /* track how many bytes have been read from FIFO - round up to
> + * 16 bit word */
> tempword = len + 16;
> if (tempword & 0x01)
> tempword++;
> @@ -1734,9 +1750,11 @@ static int ft1000_copy_down_pkt(struct net_device
> *dev, u16 *packet, u16 len)
> else
> pseudo.blk.length = ntohs(len);
>
> - pseudo.blk.source = DSPID; /* Need to swap to get in correct order
> */
> + pseudo.blk.source = DSPID; /* Need to swap to get in correct
> + order */
> pseudo.blk.destination = HOSTID;
> - pseudo.blk.portdest = NETWORKID; /* Need to swap to get in
> correct order */
> + pseudo.blk.portdest = NETWORKID; /* Need to swap to get in
> + correct order */
> pseudo.blk.portsrc = DSPAIRID;
> pseudo.blk.sh_str_id = 0;
> pseudo.blk.control = 0;
> @@ -1840,7 +1858,8 @@ static int ft1000_open(struct net_device *dev)
> {
> ft1000_reset_card(dev);
>
> - /* schedule ft1000_hbchk to perform periodic heartbeat checks on DSP
> and ASIC */
> + /* schedule ft1000_hbchk to perform periodic heartbeat checks on DSP
> + * and ASIC */
> init_timer(&poll_timer);
> poll_timer.expires = jiffies + (2 * HZ);
> poll_timer.data = (u_long)dev;
> @@ -1925,7 +1944,8 @@ static irqreturn_t ft1000_interrupt(int irq, void
> *dev_id)
> /* Read interrupt type */
> inttype = ft1000_read_reg(dev, FT1000_REG_SUP_ISR);
>
> - /* Make sure we process all interrupt before leaving the ISR due to the
> edge trigger interrupt type */
> + /* Make sure we process all interrupt before leaving the ISR due to the
> + * edge trigger interrupt type */
> while (inttype) {
> if (inttype & ISR_DOORBELL_PEND)
> ft1000_parse_dpram_msg(dev);
> @@ -1935,20 +1955,18 @@ static irqreturn_t ft1000_interrupt(int irq, void
> *dev_id)
>
> cnt = 0;
> do {
> - /* Check if we have packets in the Downlink
> FIFO */
> + /* Check if we have packets in the Downlink
> + * FIFO */
> if (info->AsicID == ELECTRABUZZ_ID) {
> - tempword =
> - ft1000_read_reg(dev,
> -
> FT1000_REG_DFIFO_STAT);
> + tempword = ft1000_read_reg(dev,
> + FT1000_REG_DFIFO_STAT);
> } else {
> - tempword =
> - ft1000_read_reg(dev,
> -
> FT1000_REG_MAG_DFSR);
> + tempword = ft1000_read_reg(dev,
> + FT1000_REG_MAG_DFSR);
> }
> - if (tempword & 0x1f)
> - ft1000_copy_up_pkt(dev);
> - else
> + if (!(tempword & 0x1f))
> break;
> + ft1000_copy_up_pkt(dev);
> cnt++;
> } while (cnt < MAX_RCV_LOOP);
>
> @@ -1980,7 +1998,8 @@ void stop_ft1000_card(struct net_device *dev)
>
> /* Make sure we free any memory reserve for provisioning */
> while (list_empty(&info->prov_list) == 0) {
> - ptr = list_entry(info->prov_list.next, struct prov_record,
> list);
> + ptr = list_entry(info->prov_list.next, struct prov_record,
> + list);
> list_del(&ptr->list);
> kfree(ptr->pprov_data);
> kfree(ptr);
> @@ -2035,8 +2054,7 @@ struct net_device *init_ft1000_card(struct
> pcmcia_device *link,
> struct ft1000_pcmcia *pcmcia;
> struct net_device *dev;
>
> - static const struct net_device_ops ft1000ops = /* Slavius
> 21.10.2009 due to kernel changes */
> - {
> + static const struct net_device_ops ft1000ops = {
> .ndo_open = &ft1000_open,
> .ndo_stop = &ft1000_close,
> .ndo_start_xmit = &ft1000_start_xmit,
> @@ -2099,7 +2117,7 @@ struct net_device *init_ft1000_card(struct
> pcmcia_device *link,
> /* dev->open = &ft1000_open; */
> /* dev->stop = &ft1000_close; */
>
> - dev->netdev_ops = &ft1000ops; /* Slavius 21.10.2009 due to
> kernel changes */
> + dev->netdev_ops = &ft1000ops;
>
> pr_debug("device name = %s\n", dev->name);
>
> @@ -2110,7 +2128,8 @@ struct net_device *init_ft1000_card(struct
> pcmcia_device *link,
> goto err_dev;
> }
>
> - if (request_irq(dev->irq, ft1000_interrupt, IRQF_SHARED, dev->name,
> dev)) {
> + if (request_irq(dev->irq, ft1000_interrupt, IRQF_SHARED, dev->name,
> + dev)) {
> netdev_err(dev, "Could not request_irq\n");
> goto err_dev;
> }
> @@ -2128,13 +2147,15 @@ struct net_device *init_ft1000_card(struct
> pcmcia_device *link,
> info->AsicID = ft1000_read_reg(dev, FT1000_REG_ASIC_ID);
> if (info->AsicID == ELECTRABUZZ_ID) {
> pr_debug("ELECTRABUZZ ASIC\n");
> - if (request_firmware(&fw_entry, "ft1000.img", &link->dev) != 0)
> {
> + if (request_firmware(&fw_entry, "ft1000.img",
> + &link->dev) != 0) {
> pr_info("Could not open ft1000.img\n");
> goto err_unreg;
> }
> } else {
> pr_debug("MAGNEMITE ASIC\n");
> - if (request_firmware(&fw_entry, "ft2000.img", &link->dev) != 0)
> {
> + if (request_firmware(&fw_entry, "ft2000.img",
> + &link->dev) != 0) {
You can just remove that "!= 0".
--
Thanks,
Giedrius
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
