From: Jes Sorensen <[email protected]>
Signed-off-by: Jes Sorensen <[email protected]>
---
drivers/staging/rtl8723au/hal/HalHWImg8723A_BB.c | 35 ++++++++++++----------
drivers/staging/rtl8723au/hal/odm_RegConfig8723A.c | 28 +++++++----------
.../staging/rtl8723au/include/odm_RegConfig8723A.h | 2 +-
3 files changed, 31 insertions(+), 34 deletions(-)
diff --git a/drivers/staging/rtl8723au/hal/HalHWImg8723A_BB.c
b/drivers/staging/rtl8723au/hal/HalHWImg8723A_BB.c
index efeb82c..e8cab9e 100644
--- a/drivers/staging/rtl8723au/hal/HalHWImg8723A_BB.c
+++ b/drivers/staging/rtl8723au/hal/HalHWImg8723A_BB.c
@@ -236,7 +236,7 @@ void ODM_ReadAndConfig_AGC_TAB_1T_8723A(struct dm_odm_t
*pDM_Odm)
continue;
} else {
if (!CheckCondition(Array[i], hex)) {
- /* Discard the following (offset, data) pairs.
*/
+ /* Discard the following (offset, data) pairs */
READ_NEXT_PAIR(v1, v2, i);
while (v2 != 0xDEAD &&
v2 != 0xCDEF &&
@@ -244,7 +244,8 @@ void ODM_ReadAndConfig_AGC_TAB_1T_8723A(struct dm_odm_t
*pDM_Odm)
READ_NEXT_PAIR(v1, v2, i);
i -= 2; /* prevent from for-loop += 2 */
} else {
- /* Configure matched pairs and skip to end of
if-else. */
+ /* Configure matched pairs and skip to
+ end of if-else. */
READ_NEXT_PAIR(v1, v2, i);
while (v2 != 0xDEAD &&
v2 != 0xCDEF &&
@@ -479,11 +480,11 @@ void ODM_ReadAndConfig_PHY_REG_1T_8723A(struct dm_odm_t
*pDM_Odm)
/* This (offset, data) pair meets the condition. */
if (v1 < 0xCDCDCDCD) {
- odm_ConfigBB_PHY_8723A(pDM_Odm, v1, bMaskDWord, v2);
+ odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
continue;
} else {
if (!CheckCondition(Array[i], hex)) {
- /* Discard the following (offset, data) pairs.
*/
+ /* Discard the following (offset, data) pairs */
READ_NEXT_PAIR(v1, v2, i);
while (v2 != 0xDEAD &&
v2 != 0xCDEF &&
@@ -491,12 +492,13 @@ void ODM_ReadAndConfig_PHY_REG_1T_8723A(struct dm_odm_t
*pDM_Odm)
READ_NEXT_PAIR(v1, v2, i);
i -= 2; /* prevent from for-loop += 2 */
} else {
- /* Configure matched pairs and skip to end of
if-else. */
+ /* Configure matched pairs and skip to
+ end of if-else. */
READ_NEXT_PAIR(v1, v2, i);
while (v2 != 0xDEAD &&
v2 != 0xCDEF &&
v2 != 0xCDCD && i < ArrayLen - 2) {
- odm_ConfigBB_PHY_8723A(pDM_Odm, v1,
bMaskDWord, v2);
+ odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
READ_NEXT_PAIR(v1, v2, i);
}
while (v2 != 0xDEAD && i < ArrayLen - 2)
@@ -517,12 +519,12 @@ static u32 Array_PHY_REG_MP_8723A[] = {
void ODM_ReadAndConfig_PHY_REG_MP_8723A(struct dm_odm_t *pDM_Odm)
{
- u32 hex = 0;
- u32 i = 0;
- u8 platform = 0x04;
- u8 board = pDM_Odm->BoardType;
- u32 ArrayLen = sizeof(Array_PHY_REG_MP_8723A)/sizeof(u32);
- u32 *Array = Array_PHY_REG_MP_8723A;
+ u32 hex = 0;
+ u32 i;
+ u8 platform = 0x04;
+ u8 board = pDM_Odm->BoardType;
+ u32 ArrayLen = sizeof(Array_PHY_REG_MP_8723A)/sizeof(u32);
+ u32 *Array = Array_PHY_REG_MP_8723A;
hex += board;
hex += ODM_ITRF_USB << 8;
@@ -534,11 +536,11 @@ void ODM_ReadAndConfig_PHY_REG_MP_8723A(struct dm_odm_t
*pDM_Odm)
/* This (offset, data) pair meets the condition. */
if (v1 < 0xCDCDCDCD) {
- odm_ConfigBB_PHY_8723A(pDM_Odm, v1, bMaskDWord, v2);
+ odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
continue;
} else {
if (!CheckCondition(Array[i], hex)) {
- /* Discard the following (offset, data) pairs.
*/
+ /* Discard the following (offset, data) pairs */
READ_NEXT_PAIR(v1, v2, i);
while (v2 != 0xDEAD &&
v2 != 0xCDEF &&
@@ -546,12 +548,13 @@ void ODM_ReadAndConfig_PHY_REG_MP_8723A(struct dm_odm_t
*pDM_Odm)
READ_NEXT_PAIR(v1, v2, i);
i -= 2; /* prevent from for-loop += 2 */
} else {
- /* Configure matched pairs and skip to end of
if-else. */
+ /* Configure matched pairs and skip to
+ end of if-else. */
READ_NEXT_PAIR(v1, v2, i);
while (v2 != 0xDEAD &&
v2 != 0xCDEF &&
v2 != 0xCDCD && i < ArrayLen - 2) {
- odm_ConfigBB_PHY_8723A(pDM_Odm, v1,
bMaskDWord, v2);
+ odm_ConfigBB_PHY_8723A(pDM_Odm, v1, v2);
READ_NEXT_PAIR(v1, v2, i);
}
while (v2 != 0xDEAD && i < ArrayLen - 2)
diff --git a/drivers/staging/rtl8723au/hal/odm_RegConfig8723A.c
b/drivers/staging/rtl8723au/hal/odm_RegConfig8723A.c
index 7fa1b38..fb84f6c 100644
--- a/drivers/staging/rtl8723au/hal/odm_RegConfig8723A.c
+++ b/drivers/staging/rtl8723au/hal/odm_RegConfig8723A.c
@@ -66,33 +66,27 @@ void odm_ConfigBB_AGC_8723A(struct dm_odm_t *pDM_Odm, u32
addr, u32 data)
}
void
-odm_ConfigBB_PHY_8723A(
- struct dm_odm_t *pDM_Odm,
- u32 Addr,
- u32 Bitmask,
- u32 Data
- )
+odm_ConfigBB_PHY_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data)
{
- if (Addr == 0xfe)
+ if (addr == 0xfe)
msleep(50);
- else if (Addr == 0xfd)
+ else if (addr == 0xfd)
mdelay(5);
- else if (Addr == 0xfc)
+ else if (addr == 0xfc)
mdelay(1);
- else if (Addr == 0xfb)
+ else if (addr == 0xfb)
udelay(50);
- else if (Addr == 0xfa)
+ else if (addr == 0xfa)
udelay(5);
- else if (Addr == 0xf9)
+ else if (addr == 0xf9)
udelay(1);
- else if (Addr == 0xa24)
- pDM_Odm->RFCalibrateInfo.RegA24 = Data;
- ODM_SetBBReg(pDM_Odm, Addr, Bitmask, Data);
+ else if (addr == 0xa24)
+ pDM_Odm->RFCalibrateInfo.RegA24 = data;
+ rtl8723au_write32(pDM_Odm->Adapter, addr, data);
/* Add 1us delay between BB/RF register setting. */
udelay(1);
ODM_RT_TRACE(pDM_Odm, ODM_COMP_INIT, ODM_DBG_LOUD,
- ("===> ODM_ConfigBBWithHeaderFile23a: [PHY_REG] %08X
%08X\n",
- Addr, Data));
+ ("===> %s: [PHY_REG] %08X %08X\n", __func__, addr, data));
}
diff --git a/drivers/staging/rtl8723au/include/odm_RegConfig8723A.h
b/drivers/staging/rtl8723au/include/odm_RegConfig8723A.h
index 5f6bc30..f2a54d8 100644
--- a/drivers/staging/rtl8723au/include/odm_RegConfig8723A.h
+++ b/drivers/staging/rtl8723au/include/odm_RegConfig8723A.h
@@ -22,6 +22,6 @@ void odm_ConfigMAC_8723A(struct dm_odm_t *pDM_Odm, u32 Addr,
u8 Data);
void odm_ConfigBB_AGC_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data);
-void odm_ConfigBB_PHY_8723A(struct dm_odm_t *pDM_Odm, u32 Addr, u32 Bitmask,
u32 Data);
+void odm_ConfigBB_PHY_8723A(struct dm_odm_t *pDM_Odm, u32 addr, u32 data);
#endif /* end of SUPPORT */
--
2.1.0
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
