Replaced C99 comments with C89.
Signed-off-by: Tolga Ceylan <[email protected]>
---
drivers/staging/rtl8192u/r819xU_firmware.c | 33 +++++++++++++++---------------
1 file changed, 17 insertions(+), 16 deletions(-)
diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c
b/drivers/staging/rtl8192u/r819xU_firmware.c
index 6a818c4..e7b2f33 100644
--- a/drivers/staging/rtl8192u/r819xU_firmware.c
+++ b/drivers/staging/rtl8192u/r819xU_firmware.c
@@ -47,7 +47,7 @@ static bool fw_download_code(struct net_device *dev, u8
*code_virtual_address,
u8 index;
firmware_init_param(dev);
- //Fragmentation might be required
+ /* Fragmentation might be required */
frag_threshold = pfirmware->cmdpacket_frag_thresold;
do {
if ((buffer_len - frag_offset) > frag_threshold) {
@@ -106,19 +106,20 @@ static bool fw_download_code(struct net_device *dev, u8
*code_virtual_address,
}
-//-----------------------------------------------------------------------------
-// Procedure: Check whether main code is download OK. If OK, turn on CPU
-//
-// Description: CPU register locates in different page against general
register.
-// Switch to CPU register in the begin and switch back
before return
-//
-//
-// Arguments: The pointer of the adapter
-//
-// Returns:
-// NDIS_STATUS_FAILURE - the following initialization process should be
terminated
-// NDIS_STATUS_SUCCESS - if firmware initialization process success
-//-----------------------------------------------------------------------------
+/*
+ * Procedure: Check whether main code is download OK. If OK, turn on CPU
+ *
+ * Description: CPU register locates in different page against general
register.
+ * Switch to CPU register in the begin and switch back before return
+ *
+ *
+ * Arguments: The pointer of the adapter
+ *
+ * Returns:
+ * NDIS_STATUS_FAILURE - the following initialization process should
+ * be terminated
+ * NDIS_STATUS_SUCCESS - if firmware initialization process success
+ */
static bool CPUcheck_maincodeok_turnonCPU(struct net_device *dev)
{
bool rt_status = true;
@@ -221,7 +222,7 @@ bool init_firmware(struct net_device *dev)
/* it is called by reset */
rst_opt = OPT_SYSTEM_RESET;
starting_state = FW_INIT_STEP0_BOOT;
- // TODO: system reset
+ /* TODO: system reset */
} else if (pfirmware->firmware_status == FW_STATUS_5_READY) {
/* it is called by Initialize */
@@ -290,7 +291,7 @@ bool init_firmware(struct net_device *dev)
* will set polling bit when firmware code is also
configured
*/
pfirmware->firmware_status = FW_STATUS_1_MOVE_BOOT_CODE;
- //mdelay(1000);
+ /* mdelay(1000); */
/*
* To initialize IMEM, CPU move code from 0x80000080,
* hence, we send 0x80 byte packet
--
2.3.0
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
