Remove all the PRINT_INFO debug.
Signed-off-by: H Hartley Sweeten <[email protected]>
Cc: Ian Abbott <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
.../comedi/drivers/addi-data/hwdrv_apci3200.c | 85 ----------------------
1 file changed, 85 deletions(-)
diff --git a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
index a3026a2..761ec1a 100644
--- a/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
+++ b/drivers/staging/comedi/drivers/addi-data/hwdrv_apci3200.c
@@ -47,8 +47,6 @@ This program is distributed in the hope that it will be
useful, but WITHOUT ANY
+----------+-----------+------------------------------------------------+
*/
-/* #define PRINT_INFO */
-
/* Card Specific information */
/* #define APCI3200_ADDRESS_RANGE 264 */
@@ -455,12 +453,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned
int dw_PCIBoardEepromAd
BoardInformations->s_Module[w_ModulCounter].
w_GainValue[w_GainIndex] = w_GainValue;
-# ifdef PRINT_INFO
- printk("\n Gain value = %d",
- BoardInformations->s_Module[w_ModulCounter].
- w_GainValue[w_GainIndex]);
-# endif
-
/*************************************/
/** Read gain factor for the module **/
/*************************************/
@@ -472,12 +464,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned
int dw_PCIBoardEepromAd
ul_GainFactor[w_GainIndex] =
(w_GainFactorValue[1] << 16) +
w_GainFactorValue[0];
-
-# ifdef PRINT_INFO
- printk("\n w_GainFactorValue [%d] = %lu", w_GainIndex,
- BoardInformations->s_Module[w_ModulCounter].
- ul_GainFactor[w_GainIndex]);
-# endif
}
/***************************************************************/
@@ -499,12 +485,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned
int dw_PCIBoardEepromAd
ul_CurrentSource[w_Input] =
(w_CurrentSources[0] +
((w_CurrentSources[1] & 0xFFF) << 16));
-
-# ifdef PRINT_INFO
- printk("\n Current sources [%d] = %lu", w_Input,
- BoardInformations->s_Module[w_ModulCounter].
- ul_CurrentSource[w_Input]);
-# endif
}
/***************************************/
@@ -522,12 +502,6 @@ static void v_GetAPCI3200EepromCalibrationValue(unsigned
int dw_PCIBoardEepromAd
ul_CurrentSourceCJC =
(w_CurrentSources[0] +
((w_CurrentSources[1] & 0xFFF) << 16));
-
-# ifdef PRINT_INFO
- printk("\n Current sources CJC = %lu",
- BoardInformations->s_Module[w_ModulCounter].
- ul_CurrentSourceCJC);
-# endif
}
}
@@ -540,10 +514,6 @@ static int i_APCI3200_GetChannelCalibrationValue(struct
comedi_device *dev,
int i_DiffChannel = 0;
int i_Module = 0;
-#ifdef PRINT_INFO
- printk("\n Channel = %u", ui_Channel_num);
-#endif
-
/* Test if single or differential mode */
if (s_BoardInfos[dev->minor].i_ConnectionType == 1) {
/* if diff */
@@ -580,16 +550,10 @@ static int i_APCI3200_GetChannelCalibrationValue(struct
comedi_device *dev,
/* Test if thermocouple or RTD mode */
*CJCCurrentSource =
s_BoardInfos[dev->minor].s_Module[i_Module].ul_CurrentSourceCJC;
-#ifdef PRINT_INFO
- printk("\n CJCCurrentSource = %lu", *CJCCurrentSource);
-#endif
*ChannelCurrentSource =
s_BoardInfos[dev->minor].s_Module[i_Module].
ul_CurrentSource[i_DiffChannel];
-#ifdef PRINT_INFO
- printk("\n ChannelCurrentSource = %lu", *ChannelCurrentSource);
-#endif
/* } */
/* } */
@@ -597,9 +561,6 @@ static int i_APCI3200_GetChannelCalibrationValue(struct
comedi_device *dev,
*ChannelGainFactor =
s_BoardInfos[dev->minor].s_Module[i_Module].
ul_GainFactor[s_BoardInfos[dev->minor].i_ADDIDATAGain];
-#ifdef PRINT_INFO
- printk("\n ChannelGainFactor = %lu", *ChannelGainFactor);
-#endif
/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
return 0;
@@ -1279,10 +1240,6 @@ static int apci3200_ai_read(struct comedi_device *dev,
return -EINVAL;
} /* if(i_Initialised==0); */
-#ifdef PRINT_INFO
- printk("\n insn->unused[0] = %i", insn->unused[0]);
-#endif
-
switch (insn->unused[0]) {
case 0:
@@ -1307,15 +1264,6 @@ static int apci3200_ai_read(struct comedi_device *dev,
&s_BoardInfos[dev->minor].
ui_InterruptChannelValue[s_BoardInfos[dev->minor].
i_Count + 8]);
-
-#ifdef PRINT_INFO
- printk("\n s_BoardInfos
[dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+6] =
%lu",
s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count
+ 6]);
-
- printk("\n s_BoardInfos
[dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+7] =
%lu",
s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count
+ 7]);
-
- printk("\n s_BoardInfos
[dev->minor].ui_InterruptChannelValue[s_BoardInfos [dev->minor].i_Count+8] =
%lu",
s_BoardInfos[dev->minor].ui_InterruptChannelValue[s_BoardInfos[dev->minor].i_Count
+ 8]);
-#endif
-
/* End JK 25.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM
values */
/* BEGIN JK 06.07.04: Management of sevrals boards */
@@ -1471,9 +1419,6 @@ static int apci3200_ai_read(struct comedi_device *dev,
data[4]= ui_InterruptChannelValue[4];
data[5]= ui_InterruptChannelValue[5];
*/
-#ifdef PRINT_INFO
- printk("\n data[0]= s_BoardInfos
[dev->minor].ui_InterruptChannelValue[0];");
-#endif
data[0] =
s_BoardInfos[dev->minor].
ui_InterruptChannelValue[0];
@@ -1576,13 +1521,6 @@ static int apci3200_ai_config(struct comedi_device *dev,
unsigned int ui_Dummy = 0;
int i_err = 0;
- /* Begin JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values
*/
-
-#ifdef PRINT_INFO
- int i = 0, i2 = 0;
-#endif
- /* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM values */
-
/* BEGIN JK 06.07.04: Management of sevrals boards */
/* Initialize the structure */
if (s_BoardInfos[dev->minor].b_StructInitialized != 1) {
@@ -1608,29 +1546,6 @@ static int apci3200_ai_config(struct comedi_device *dev,
v_GetAPCI3200EepromCalibrationValue(devpriv->i_IobaseAmcc,
&s_BoardInfos[dev->minor]);
-
-#ifdef PRINT_INFO
- for (i = 0; i < MAX_MODULE; i++) {
- printk("\n s_Module[%i].ul_CurrentSourceCJC = %lu", i,
- s_BoardInfos[dev->minor].s_Module[i].
- ul_CurrentSourceCJC);
-
- for (i2 = 0; i2 < 5; i2++) {
- printk("\n s_Module[%i].ul_CurrentSource [%i] =
%lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_CurrentSource[i2]);
- }
-
- for (i2 = 0; i2 < 8; i2++) {
- printk("\n s_Module[%i].ul_GainFactor [%i] =
%lu", i, i2, s_BoardInfos[dev->minor].s_Module[i].ul_GainFactor[i2]);
- }
-
- for (i2 = 0; i2 < 8; i2++) {
- printk("\n s_Module[%i].w_GainValue [%i] = %u",
- i, i2,
- s_BoardInfos[dev->minor].s_Module[i].
- w_GainValue[i2]);
- }
- }
-#endif
/* End JK 21.10.2004: APCI-3200 / APCI-3300 Reading of EEPROM
values */
}
--
1.9.3
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
