From: Jes Sorensen <[email protected]>
Signed-off-by: Jes Sorensen <[email protected]>
---
.../staging/rtl8723au/hal/rtl8723a_bt-coexist.c | 46 ++++++++++++++++++++
drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c | 49 ----------------------
drivers/staging/rtl8723au/hal/usb_halinit.c | 4 +-
.../staging/rtl8723au/include/rtl8723a_bt_intf.h | 2 +
drivers/staging/rtl8723au/include/rtl8723a_hal.h | 4 --
5 files changed, 49 insertions(+), 56 deletions(-)
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
b/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
index 4d94b4b..48c16f4 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_bt-coexist.c
@@ -11341,3 +11341,49 @@ void HALBT_SetRtsCtsNoLenLimit(struct rtw_adapter
*padapter)
}
/* ===== End of sync from SD7 driver HAL/HalBT.c ===== */
+
+void rtl8723a_dual_antenna_detection(struct rtw_adapter *padapter)
+{
+ struct hal_data_8723a *pHalData;
+ struct dm_odm_t *pDM_Odm;
+ struct sw_ant_sw *pDM_SWAT_Table;
+ u8 i;
+
+ pHalData = GET_HAL_DATA(padapter);
+ pDM_Odm = &pHalData->odmpriv;
+ pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
+
+ /* */
+ /* <Roger_Notes> RTL8723A Single and Dual antenna dynamic detection
+ mechanism when RF power state is on. */
+ /* We should take power tracking, IQK, LCK, RCK RF read/write
+ operation into consideration. */
+ /* 2011.12.15. */
+ /* */
+ if (!pHalData->bAntennaDetected) {
+ u8 btAntNum = BT_GetPGAntNum(padapter);
+
+ /* Set default antenna B status */
+ if (btAntNum == Ant_x2)
+ pDM_SWAT_Table->ANTB_ON = true;
+ else if (btAntNum == Ant_x1)
+ pDM_SWAT_Table->ANTB_ON = false;
+ else
+ pDM_SWAT_Table->ANTB_ON = true;
+
+ if (pHalData->CustomerID != RT_CID_TOSHIBA) {
+ for (i = 0; i < MAX_ANTENNA_DETECTION_CNT; i++) {
+ if (ODM_SingleDualAntennaDetection
+ (&pHalData->odmpriv, ANTTESTALL) == true)
+ break;
+ }
+
+ /* Set default antenna number for BT coexistence */
+ if (btAntNum == Ant_x2)
+ BT_SetBtCoexCurrAntNum(padapter,
+ pDM_SWAT_Table->
+ ANTB_ON ? 2 : 1);
+ }
+ pHalData->bAntennaDetected = true;
+ }
+}
diff --git a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
index 20c93e4..970b585 100644
--- a/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
+++ b/drivers/staging/rtl8723au/hal/rtl8723a_hal_init.c
@@ -2575,52 +2575,3 @@ void hw_var_set_mlme_join(struct rtw_adapter *padapter,
u8 type)
}
#endif
}
-
-#ifdef CONFIG_8723AU_BT_COEXIST
-
-void rtl8723a_SingleDualAntennaDetection(struct rtw_adapter *padapter)
-{
- struct hal_data_8723a *pHalData;
- struct dm_odm_t *pDM_Odm;
- struct sw_ant_sw *pDM_SWAT_Table;
- u8 i;
-
- pHalData = GET_HAL_DATA(padapter);
- pDM_Odm = &pHalData->odmpriv;
- pDM_SWAT_Table = &pDM_Odm->DM_SWAT_Table;
-
- /* */
- /* <Roger_Notes> RTL8723A Single and Dual antenna dynamic detection
- mechanism when RF power state is on. */
- /* We should take power tracking, IQK, LCK, RCK RF read/write
- operation into consideration. */
- /* 2011.12.15. */
- /* */
- if (!pHalData->bAntennaDetected) {
- u8 btAntNum = BT_GetPGAntNum(padapter);
-
- /* Set default antenna B status */
- if (btAntNum == Ant_x2)
- pDM_SWAT_Table->ANTB_ON = true;
- else if (btAntNum == Ant_x1)
- pDM_SWAT_Table->ANTB_ON = false;
- else
- pDM_SWAT_Table->ANTB_ON = true;
-
- if (pHalData->CustomerID != RT_CID_TOSHIBA) {
- for (i = 0; i < MAX_ANTENNA_DETECTION_CNT; i++) {
- if (ODM_SingleDualAntennaDetection
- (&pHalData->odmpriv, ANTTESTALL) == true)
- break;
- }
-
- /* Set default antenna number for BT coexistence */
- if (btAntNum == Ant_x2)
- BT_SetBtCoexCurrAntNum(padapter,
- pDM_SWAT_Table->
- ANTB_ON ? 2 : 1);
- }
- pHalData->bAntennaDetected = true;
- }
-}
-#endif /* CONFIG_8723AU_BT_COEXIST */
diff --git a/drivers/staging/rtl8723au/hal/usb_halinit.c
b/drivers/staging/rtl8723au/hal/usb_halinit.c
index d30ba1b..cbd5a8c 100644
--- a/drivers/staging/rtl8723au/hal/usb_halinit.c
+++ b/drivers/staging/rtl8723au/hal/usb_halinit.c
@@ -831,9 +831,7 @@ static int rtl8723au_hal_init(struct rtw_adapter *Adapter)
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_LCK);
rtl8723a_phy_lc_calibrate(Adapter);
-#ifdef CONFIG_8723AU_BT_COEXIST
- rtl8723a_SingleDualAntennaDetection(Adapter);
-#endif
+ rtl8723a_dual_antenna_detection(Adapter);
}
HAL_INIT_PROFILE_TAG(HAL_INIT_STAGES_MISC21);
diff --git a/drivers/staging/rtl8723au/include/rtl8723a_bt_intf.h
b/drivers/staging/rtl8723au/include/rtl8723a_bt_intf.h
index 5de42b0..7cf4de6 100644
--- a/drivers/staging/rtl8723au/include/rtl8723a_bt_intf.h
+++ b/drivers/staging/rtl8723au/include/rtl8723a_bt_intf.h
@@ -31,6 +31,7 @@ void rtl8723a_BT_specialpacket_notify(struct rtw_adapter
*padapter);
void rtl8723a_BT_lps_leave(struct rtw_adapter *padapter);
void rtl8723a_BT_disable_coexist(struct rtw_adapter *padapter);
bool rtl8723a_BT_disable_EDCA_turbo(struct rtw_adapter *padapter);
+void rtl8723a_dual_antenna_detection(struct rtw_adapter *padapter);
#else
static inline bool rtl8723a_BT_using_antenna_1(struct rtw_adapter *padapter)
{
@@ -54,6 +55,7 @@ static inline bool rtl8723a_BT_disable_EDCA_turbo(struct
rtw_adapter *padapter)
{
return false;
}
+#define rtl8723a_dual_antenna_detection(padapter) do {} while(0)
#endif
#endif
diff --git a/drivers/staging/rtl8723au/include/rtl8723a_hal.h
b/drivers/staging/rtl8723au/include/rtl8723a_hal.h
index 33ad2b7..344b708 100644
--- a/drivers/staging/rtl8723au/include/rtl8723a_hal.h
+++ b/drivers/staging/rtl8723au/include/rtl8723a_hal.h
@@ -529,10 +529,6 @@ void Hal_EfuseParseThermalMeter_8723A(struct rtw_adapter
*padapter, u8 *hwinfo,
void Hal_InitChannelPlan23a(struct rtw_adapter *padapter);
-#ifdef CONFIG_8723AU_BT_COEXIST
-void rtl8723a_SingleDualAntennaDetection(struct rtw_adapter *padapter);
-#endif
-
/* register */
void SetBcnCtrlReg23a(struct rtw_adapter *padapter, u8 SetBits, u8 ClearBits);
void rtl8723a_InitBeaconParameters(struct rtw_adapter *padapter);
--
1.9.3
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
