Hi Shubhrajyoti,
My name is Zhengxun and I am the engineer from Macronix. We are
using the platform PicoZed 7015/7030 SOM (System On Module),
which is based on Xilinx Zynq®-7000 All Programmable (AP) SoC to
verify our Flash dirver. Of course, we are also using your clock
wizard, our version seems to be v5.2, but something went wrong.
+static int clk_wzrd_dynamic_reconfig(struct clk_hw *hw, unsigned long
rate,
+ unsigned long parent_rate)
+{
+ int err;
+ u32 value;
+ unsigned long flags = 0;
+ struct clk_wzrd_divider *divider =
to_clk_wzrd_divider(hw);
+ void __iomem *div_addr = divider->base + divider->offset;
+
+ if (divider->lock)
+ spin_lock_irqsave(divider->lock, flags);
+ else
+ __acquire(divider->lock);
+
+ value = DIV_ROUND_CLOSEST(parent_rate, rate);
+
+ /* Cap the value to max */
+ min_t(u32, value, WZRD_DR_MAX_INT_DIV_VALUE);
+
+ /* Set divisor and clear phase offset */
+ writel(value, div_addr);
+ writel(0x00, div_addr + WZRD_DR_DIV_TO_PHASE_OFFSET);
Why phase always set to zero? We want to support DTR operation in
Flash driver. Can you add a set_phase function to adjust the phase?
+ /* Check status register */
+ err = readl_poll_timeout(divider->base +
WZRD_DR_STATUS_REG_OFFSET,
+ value,
value & WZRD_DR_LOCK_BIT_MASK,
+ WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
+ if (err)
+ goto err_reconfig;
+
+ /* Initiate reconfiguration */
+ writel(WZRD_DR_BEGIN_DYNA_RECONF,
+ divider->base + WZRD_DR_INIT_REG_OFFSET);
+
+ /* Check status register */
+ err = readl_poll_timeout(divider->base +
WZRD_DR_STATUS_REG_OFFSET,
+ value,
value & WZRD_DR_LOCK_BIT_MASK,
+ WZRD_USEC_POLL, WZRD_TIMEOUT_POLL);
According to pg015-clk-wiz.pdf, Clocking Wizard v5.2 and later, need to
write
0x00000007 followed by 0x00000002 into Clock Configuration Register 23, to
consolidate the redundant bits that the IP has upgraded, right?
Can you compatible to v5.2?
+err_reconfig:
+ if (divider->lock)
+ spin_unlock_irqrestore(divider->lock,
flags);
+ else
+ __release(divider->lock);
+ return err;
+}
Thanks,
Zhengxun
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information
and/or personal data, which is protected by applicable laws. Please be
reminded that duplication, disclosure, distribution, or use of this e-mail
(and/or its attachments) or any part thereof is prohibited. If you receive
this e-mail in error, please notify us immediately and delete this mail as
well as its attachment(s) from your system. In addition, please be
informed that collection, processing, and/or use of personal data is
prohibited unless expressly permitted by personal data protection laws.
Thank you for your attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
============================================================================
CONFIDENTIALITY NOTE:
This e-mail and any attachments may contain confidential information and/or
personal data, which is protected by applicable laws. Please be reminded that
duplication, disclosure, distribution, or use of this e-mail (and/or its
attachments) or any part thereof is prohibited. If you receive this e-mail in
error, please notify us immediately and delete this mail as well as its
attachment(s) from your system. In addition, please be informed that
collection, processing, and/or use of personal data is prohibited unless
expressly permitted by personal data protection laws. Thank you for your
attention and cooperation.
Macronix International Co., Ltd.
=====================================================================
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
