Use the comedi_fc helper function to automatically call the subdevice
(*cancel) function when needed and call comedi_event().
This also fixes two bugs.
1) the analog input command is canceled due to a buffer overflow
without sending an event (@@ -341,7 +340,7 @@).
2) an analog output error causes the command to cancel but the event
is reported to the analog input subdevice (@@ -449,15 +447,13 @@).
In the Kconfig, COMEDI_DT282X already selects COMEDI_FC.
Signed-off-by: H Hartley Sweeten <[email protected]>
Cc: Ian Abbott <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/dt282x.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/staging/comedi/drivers/dt282x.c
b/drivers/staging/comedi/drivers/dt282x.c
index 6cc8f1d..16cc100 100644
--- a/drivers/staging/comedi/drivers/dt282x.c
+++ b/drivers/staging/comedi/drivers/dt282x.c
@@ -306,7 +306,6 @@ static void dt282x_ao_dma_interrupt(struct comedi_device
*dev)
size = cfc_read_array_from_buffer(s, ptr, devpriv->dma_maxsize);
if (size == 0) {
dev_err(dev->class_dev, "AO underrun\n");
- dt282x_ao_cancel(dev, s);
s->async->events |= COMEDI_CB_OVERFLOW;
return;
}
@@ -341,7 +340,7 @@ static void dt282x_ai_dma_interrupt(struct comedi_device
*dev)
dt282x_munge(dev, ptr, size);
ret = cfc_write_array_to_buffer(s, ptr, size);
if (ret != size) {
- dt282x_ai_cancel(dev, s);
+ s->async->events |= COMEDI_CB_OVERFLOW;
return;
}
devpriv->nread -= size / 2;
@@ -351,7 +350,6 @@ static void dt282x_ai_dma_interrupt(struct comedi_device
*dev)
devpriv->nread = 0;
}
if (!devpriv->nread) {
- dt282x_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA;
return;
}
@@ -449,15 +447,13 @@ static irqreturn_t dt282x_interrupt(int irq, void *d)
if (adcsr & DT2821_ADERR) {
if (devpriv->nread != 0) {
comedi_error(dev, "A/D error");
- dt282x_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_ERROR;
}
handled = 1;
}
if (dacsr & DT2821_DAERR) {
comedi_error(dev, "D/A error");
- dt282x_ao_cancel(dev, s_ao);
- s->async->events |= COMEDI_CB_ERROR;
+ s_ao->async->events |= COMEDI_CB_ERROR;
handled = 1;
}
#if 0
@@ -486,7 +482,8 @@ static irqreturn_t dt282x_interrupt(int irq, void *d)
handled = 1;
}
#endif
- comedi_event(dev, s);
+ cfc_handle_events(dev, s);
+ cfc_handle_events(dev, s_ao);
return IRQ_RETVAL(handled);
}
--
1.8.5.2
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
