Fix spelling typo in comment and printk within
rtl8821ae/rtl8821ae.
Signed-off-by: Masanari Iida <[email protected]>
---
drivers/staging/rtl8821ae/rtl8821ae/dm.c | 24 +++++++++----------
drivers/staging/rtl8821ae/rtl8821ae/fw.c | 8 +++----
.../staging/rtl8821ae/rtl8821ae/hal_bt_coexist.h | 2 +-
drivers/staging/rtl8821ae/rtl8821ae/hal_btc.c | 4 ++--
drivers/staging/rtl8821ae/rtl8821ae/hw.c | 10 ++++----
drivers/staging/rtl8821ae/rtl8821ae/phy.c | 4 ++--
drivers/staging/rtl8821ae/rtl8821ae/phy.h | 2 +-
drivers/staging/rtl8821ae/rtl8821ae/pwrseq.h | 10 ++++----
drivers/staging/rtl8821ae/rtl8821ae/pwrseqcmd.c | 2 +-
drivers/staging/rtl8821ae/rtl8821ae/reg.h | 28 +++++++++++-----------
drivers/staging/rtl8821ae/rtl8821ae/sw.c | 4 ++--
drivers/staging/rtl8821ae/rtl8821ae/trx.c | 6 ++---
12 files changed, 52 insertions(+), 52 deletions(-)
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/dm.c
b/drivers/staging/rtl8821ae/rtl8821ae/dm.c
index 8634206..e0efcd2 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/dm.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/dm.c
@@ -731,7 +731,7 @@ void rtl8821ae_dm_find_minimum_rssi(struct ieee80211_hw *hw)
rtl_dm_dig->min_undecorated_pwdb_for_dm =
rtlpriv->dm.entry_min_undecoratedsmoothed_pwdb;
RT_TRACE(COMP_BB_POWERSAVING, DBG_LOUD,
- ("AP Ext Port or disconnet PWDB = 0x%x \n",
+ ("AP Ext Port or disconnect PWDB = 0x%x \n",
rtl_dm_dig->min_undecorated_pwdb_for_dm));
}
RT_TRACE(COMP_DIG, DBG_LOUD, ("MinUndecoratedPWDBForDM =%d\n",
@@ -925,7 +925,7 @@ static void rtl8821ae_dm_dig(struct ieee80211_hw *hw)
if (rtlpriv->falsealm_cnt.cnt_all > 10000) {
RT_TRACE(COMP_DIG, DBG_LOUD,
- ("rtl8821ae_dm_dig(): Abnornally false alarm case.
\n"));
+ ("rtl8821ae_dm_dig(): Abnormally false alarm case.
\n"));
if (dm_digtable.large_fa_hit != 3)
dm_digtable.large_fa_hit++;
@@ -1087,7 +1087,7 @@ static void
rtl8821ae_dm_false_alarm_counter_statistics(struct ieee80211_hw *hw)
else
falsealm_cnt->cnt_all = falsealm_cnt->cnt_ofdm_fail;
- /*reset OFDM FA coutner*/
+ /*reset OFDM FA counter*/
rtl_set_bbreg(hw, ODM_REG_OFDM_FA_RST_11AC, BIT(17), 1);
rtl_set_bbreg(hw, ODM_REG_OFDM_FA_RST_11AC, BIT(17), 0);
/* reset CCK FA counter*/
@@ -1316,7 +1316,7 @@ u8 rtl8812ae_hw_rate_to_mrate(
/*-----------------------------------------------------------------------------
* Function: odm_TxPwrTrackSetPwr88E()
*
- * Overview: 88E change all channel tx power accordign to flag.
+ * Overview: 88E change all channel tx power according to flag.
* OFDM & CCK are all different.
*
* Input: NONE
@@ -1537,7 +1537,7 @@ void rtl8812ae_dm_txpwr_track_set_pwr(struct ieee80211_hw
*hw,
rtldm->modify_txagc_flag_path_b = false;
RT_TRACE(COMP_POWER_TRACKING, DBG_LOUD,
- ("******Path_B
pDM_Odm->Modify_TxAGC_Flag = FALSE \n"));
+ ("******Path_B
dm_Odm->Modify_TxAGC_Flag = FALSE \n"));
}
}
}
@@ -1654,7 +1654,7 @@ void rtl8812ae_dm_txpower_tracking_callback_thermalmeter
if (delta > 0 && rtldm->txpower_track_control)
{
- /*"delta" here is used to record the absolute value of
differrence.*/
+ /*"delta" here is used to record the absolute value of
difference.*/
delta = thermal_value > rtlefuse->eeprom_thermalmeter ? \
(thermal_value - rtlefuse->eeprom_thermalmeter) : \
(rtlefuse->eeprom_thermalmeter - thermal_value);
@@ -1976,7 +1976,7 @@ void rtl8821ae_phy_lccalibrate(
/*-----------------------------------------------------------------------------
* Function: odm_TxPwrTrackSetPwr88E()
*
- * Overview: 88E change all channel tx power accordign to flag.
+ * Overview: 88E change all channel tx power according to flag.
* OFDM & CCK are all different.
*
* Input: NONE
@@ -2159,7 +2159,7 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter
u8 *delta_swing_table_idx_tup_b;
u8 *delta_swing_table_idx_tdown_b;
- /*2. Initilization ( 7 steps in total )*/
+ /*2. Initialization ( 7 steps in total )*/
rtl8821ae_get_delta_swing_table(hw, (u8**)&delta_swing_table_idx_tup_a,
(u8**)&delta_swing_table_idx_tdown_a,
(u8**)&delta_swing_table_idx_tup_b,
@@ -2244,7 +2244,7 @@ void rtl8821ae_dm_txpower_tracking_callback_thermalmeter
if (delta > 0 && rtldm->txpower_track_control)
{
- /*"delta" here is used to record the absolute value of
differrence.*/
+ /*"delta" here is used to record the absolute value of
difference.*/
delta = thermal_value > rtlefuse->eeprom_thermalmeter ? \
(thermal_value - rtlefuse->eeprom_thermalmeter) : \
(rtlefuse->eeprom_thermalmeter - thermal_value);
@@ -2613,11 +2613,11 @@ static void rtl8821ae_dm_check_edca_turbo(struct
ieee80211_hw *hw)
RT_TRACE(COMP_TURBO, DBG_LOUD,
("rtl8821ae_dm_check_edca_turbo=====>"));
RT_TRACE(COMP_TURBO, DBG_LOUD,
- ("Orginial BE PARAM: 0x%x\n",
+ ("Original BE PARAM: 0x%x\n",
rtl_read_dword(rtlpriv, DM_REG_EDCA_BE_11N)));
/*===============================
- list paramter for different platform
+ list parameter for different platform
===============================*/
b_last_is_cur_rdl_state = rtlpriv->dm.bis_cur_rdlstate;
pb_is_cur_rdl_state = &( rtlpriv->dm.bis_cur_rdlstate);
@@ -2963,7 +2963,7 @@ void rtl8821ae_dm_dynamic_atc_switch(struct ieee80211_hw
*hw)
"Crystal cap = 0x%x, Crystal cap offset = %d\n",
rtldm->crystal_cap, adjust_xtal));
- /*3.Adjudt Crystal Cap.*/
+ /*3.Adjust Crystal Cap.*/
if (adjust_xtal != 0){
rtldm->is_freeze = 0;
rtldm->crystal_cap += adjust_xtal;
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/fw.c
b/drivers/staging/rtl8821ae/rtl8821ae/fw.c
index 4083cab..46eb412 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/fw.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/fw.c
@@ -164,7 +164,7 @@ static int _rtl8821ae_fw_free_to_go(struct ieee80211_hw *hw)
if (counter >= FW_8821AE_POLLING_TIMEOUT_COUNT) {
RT_TRACE(COMP_ERR, DBG_LOUD,
- ("chksum report faill ! REG_MCUFWDL:0x%08x .\n",
+ ("chksum report fail ! REG_MCUFWDL:0x%08x .\n",
value32));
goto exit;
}
@@ -368,7 +368,7 @@ static void _rtl8821ae_fill_h2c_command(struct ieee80211_hw
*hw,
wait_h2c_limmit--;
if (wait_h2c_limmit == 0) {
RT_TRACE(COMP_CMD, DBG_LOUD,
- ("Wating too long for FW read "
+ ("Waiting too long for FW read
"
"clear HMEBox(%d)!\n",
boxnum));
break;
}
@@ -378,7 +378,7 @@ static void _rtl8821ae_fill_h2c_command(struct ieee80211_hw
*hw,
isfw_read =
_rtl8821ae_check_fw_read_last_h2c(hw, boxnum);
u1b_tmp = rtl_read_byte(rtlpriv, 0x130);
RT_TRACE(COMP_CMD, DBG_LOUD,
- ("Wating for FW read clear
HMEBox(%d)!!! "
+ ("Waiting for FW read clear
HMEBox(%d)!!! "
"0x130 = %2x\n", boxnum, u1b_tmp));
}
}
@@ -1179,7 +1179,7 @@ void rtl8821ae_set_fw_rsvdpagepkt(struct ieee80211_hw
*hw, bool b_dl_finished)
("Set RSVD page location to Fw FAIL!!!!!!.\n"));
}
-/*Shoud check FW support p2p or not.*/
+/*Should check FW support p2p or not.*/
void rtl8821ae_set_p2p_ctw_period_cmd(struct ieee80211_hw *hw, u8 ctwindow)
{
u8 u1_ctwindow_period[1] ={ ctwindow};
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/hal_bt_coexist.h
b/drivers/staging/rtl8821ae/rtl8821ae/hal_bt_coexist.h
index 799cc6f..b365f82 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/hal_bt_coexist.h
+++ b/drivers/staging/rtl8821ae/rtl8821ae/hal_bt_coexist.h
@@ -142,7 +142,7 @@ void rtl8821ae_dm_bt_hw_coex_all_off(struct ieee80211_hw
*hw);
long rtl8821ae_dm_bt_get_rx_ss(struct ieee80211_hw *hw);
void rtl8821ae_dm_bt_balance(struct ieee80211_hw *hw,
bool b_balance_on, u8 ms0, u8 ms1);
-void rtl8821ae_dm_bt_agc_table(struct ieee80211_hw *hw, u8 tyep);
+void rtl8821ae_dm_bt_agc_table(struct ieee80211_hw *hw, u8 type);
void rtl8821ae_dm_bt_bb_back_off_level(struct ieee80211_hw *hw, u8 type);
u8 rtl8821ae_dm_bt_check_coex_rssi_state(struct ieee80211_hw *hw,
u8 level_num, u8
rssi_thresh, u8 rssi_thresh1);
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/hal_btc.c
b/drivers/staging/rtl8821ae/rtl8821ae/hal_btc.c
index 79386ee..6898868 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/hal_btc.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/hal_btc.c
@@ -157,7 +157,7 @@ bool rtl8821ae_dm_bt_is_same_coexist_state(struct
ieee80211_hw *hw)
&&(rtlpcipriv->btcoexist.previous_state_h
== rtlpcipriv->btcoexist.current_state_h)) {
RT_TRACE(COMP_BT_COEXIST, DBG_DMESG,
- ("[DM][BT], Coexist state do not chang!!\n"));
+ ("[DM][BT], Coexist state do not change!!\n"));
return true;
} else {
RT_TRACE(COMP_BT_COEXIST, DBG_DMESG,
@@ -902,7 +902,7 @@ void rtl8821ae_dm_bt_set_bt_dm(struct ieee80211_hw *hw,
struct btdm_8821ae *p_bt
/*
* Note:
- * We should add delay for making sure sw DacSwing can be set
sucessfully.
+ * We should add delay for making sure sw DacSwing can be set
successfully.
* because of that rtl8821ae_dm_bt_set_fw_2_ant_hid() and
rtl8821ae_dm_bt_set_fw_tdma_ctrl()
* will overwrite the reg 0x880.
*/
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/hw.c
b/drivers/staging/rtl8821ae/rtl8821ae/hw.c
index d3e9b93..1b8583b 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/hw.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/hw.c
@@ -1017,7 +1017,7 @@ static void _rtl8821ae_hw_configure(struct ieee80211_hw
*hw)
/* ARFB table 12 for 11ac 24G 1SS */
rtl_write_dword(rtlpriv, REG_ARFR3, 0x00000015);
rtl_write_dword(rtlpriv, REG_ARFR3 + 4, 0xffcff000);
- /* 0x420[7] = 0 , enable retry AMPDU in new AMPD not singal MPDU. */
+ /* 0x420[7] = 0 , enable retry AMPDU in new AMPD not signal MPDU. */
rtl_write_word(rtlpriv, REG_FWHW_TXQ_CTRL, 0x1F00);
rtl_write_byte(rtlpriv, REG_AMPDU_MAX_TIME, 0x70);
@@ -1407,7 +1407,7 @@ int rtl8821ae_hw_init(struct ieee80211_hw *hw)
rtl8821ae_phy_mac_config(hw);
/* because last function modify RCR, so we update
* rcr var here, or TP will unstable for receive_config
- * is wrong, RX RCR_ACRC32 will cause TP unstabel & Rx
+ * is wrong, RX RCR_ACRC32 will cause TP unstable & Rx
* RCR_APP_ICV will cause mac80211 unassoc for cisco 1252
rtlpci->receive_config = rtl_read_dword(rtlpriv, REG_RCR);
rtlpci->receive_config &= ~(RCR_ACRC32 | RCR_AICV);
@@ -1563,7 +1563,7 @@ static enum version_8821ae
_rtl8821ae_read_chip_version(struct ieee80211_hw *hw)
break;
default:
RT_TRACE(COMP_INIT, DBG_LOUD,
- ("Chip Version ID: Unknow (0x%X).\n", version));
+ ("Chip Version ID: Unknown (0x%X).\n",
version));
break;
}
@@ -2372,7 +2372,7 @@ static void _rtl8812ae_read_adapter_info(struct
ieee80211_hw *hw, bool b_pseudo_
if (rtlefuse->eeprom_channelplan == 0xff)
rtlefuse->eeprom_channelplan = 0x7F;
- /* set channel paln to world wide 13 */
+ /* set channel plan to world wide 13 */
//rtlefuse->channel_plan = (u8) rtlefuse->eeprom_channelplan;
/*parse xtal*/
@@ -2535,7 +2535,7 @@ static void _rtl8821ae_read_adapter_info(struct
ieee80211_hw *hw, bool b_pseudo_
if (rtlefuse->eeprom_channelplan == 0xff)
rtlefuse->eeprom_channelplan = 0x7F;
- /* set channel paln to world wide 13 */
+ /* set channel plan to world wide 13 */
//rtlefuse->channel_plan = (u8) rtlefuse->eeprom_channelplan;
/*parse xtal*/
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/phy.c
b/drivers/staging/rtl8821ae/rtl8821ae/phy.c
index d02fca3..c661290 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/phy.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/phy.c
@@ -86,7 +86,7 @@ void rtl8812ae_fixspur(
/* 0x8AC[11:10] = 2'b10*/
- /* <20120914, Kordan> A workarould to resolve
+ /* <20120914, Kordan> A workaround to resolve
2480Mhz spur by setting ADC clock as 160M. (Asked by Binson)*/
if (band_width == HT_CHANNEL_WIDTH_20 &&
(channel == 13 || channel == 14)) {
@@ -107,7 +107,7 @@ void rtl8812ae_fixspur(
}
else if (rtlhal->hw_type == HARDWARE_TYPE_RTL8812AE)
{
- /* <20120914, Kordan> A workarould to resolve
+ /* <20120914, Kordan> A workaround to resolve
2480Mhz spur by setting ADC clock as 160M. (Asked by Binson)*/
if (band_width == HT_CHANNEL_WIDTH_20 &&
(channel == 13 || channel == 14))
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/phy.h
b/drivers/staging/rtl8821ae/rtl8821ae/phy.h
index a932d8c..a80bf73 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/phy.h
+++ b/drivers/staging/rtl8821ae/rtl8821ae/phy.h
@@ -30,7 +30,7 @@
#ifndef __RTL8821AE_PHY_H__
#define __RTL8821AE_PHY_H__
-/*It must always set to 4, otherwise read efuse table secquence will be
wrong.*/
+/*It must always set to 4, otherwise read efuse table sequence will be wrong.*/
#define MAX_TX_COUNT 4
#define TX_1S 0
#define TX_2S 1
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/pwrseq.h
b/drivers/staging/rtl8821ae/rtl8821ae/pwrseq.h
index 8b39c04..480a6bb 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/pwrseq.h
+++ b/drivers/staging/rtl8821ae/rtl8821ae/pwrseq.h
@@ -81,7 +81,7 @@
{0x0047, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0},/* 0x47[7:0] = 00
gpio mode */ \
{0x0007, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_USB_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0},/* suspend option all
off */ \
{0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x80, BIT7},/*0x14[7] = 1 turn
on ZCD */ \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, BIT0},/* 0x15[0] =1 trun
on ZCD */ \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, BIT0},/* 0x15[0] =1 turn
on ZCD */ \
{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x10, BIT4},/*0x23[4] = 1 hpon
LDO sleep mode */ \
{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_USB_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x02, 0},/*0x8[1] = 0 ANA clk
=500k */ \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, BIT3, BIT3}, /*0x04[11] =
2b'11 enable WL suspend for PCIe*/
@@ -91,7 +91,7 @@
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, //
comments here*/ \
{0x0005, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, BIT3, 0}, /*0x04[11] =
2b'01enable WL suspend*/ \
{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x10, 0},/*0x23[4] = 0 hpon
LDO sleep mode leave */ \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, 0},/* 0x15[0] =0 trun
off ZCD */ \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, 0},/* 0x15[0] =0 turn
off ZCD */ \
{0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x80, 0},/*0x14[7] = 0 turn
off ZCD */ \
{0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0x00},/* gpio0~7 input
mode */ \
{0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0x00},/* gpio11 input
mode, gpio10~8 input mode */
@@ -110,7 +110,7 @@
{0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0xff},/* gpio0~7 output
mode */ \
{0x0047, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0},/* 0x47[7:0] = 00
gpio mode */ \
{0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x80, BIT7},/*0x14[7] = 1 turn
on ZCD */ \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, BIT0},/* 0x15[0] =1 trun
on ZCD */ \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, BIT0},/* 0x15[0] =1 turn
on ZCD */ \
{0x0012, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, 0},/*0x12[0] = 0 force
PFM mode */ \
{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x10, BIT4},/*0x23[4] = 1 hpon
LDO sleep mode */ \
{0x0008, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_USB_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x02, 0},/*0x8[1] = 0 ANA clk
=500k */ \
@@ -124,7 +124,7 @@
/* { offset, cut_msk, fab_msk|interface_msk, base|cmd, msk, value }, //
comments here*/ \
{0x0012, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, BIT0, BIT0},/*0x12[0] = 1
force PWM mode */ \
{0x0014, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x80, 0},/*0x14[7] = 0 turn
off ZCD */ \
- {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, 0},/* 0x15[0] =0 trun
off ZCD */ \
+ {0x0015, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x01, 0},/* 0x15[0] =0 turn
off ZCD */ \
{0x0023, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0x10, 0},/*0x23[4] = 0 hpon
LDO leave sleep mode */ \
{0x0046, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0x00},/* gpio0~7 input
mode */ \
{0x0043, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,
PWR_INTF_ALL_MSK,PWR_BASEADDR_MAC,PWR_CMD_WRITE, 0xFF, 0x00},/* gpio11 input
mode, gpio10~8 input mode */ \
@@ -204,7 +204,7 @@ extern struct wlan_pwr_cfg
rtl8812_leave_lps_flow[RTL8812_TRANS_LPS_TO_ACT_STEP
4: LPS--Low Power State
5: SUS--Suspend
- The transision from different states are defined below
+ The transition from different states are defined below
TRANS_CARDEMU_TO_ACT
TRANS_ACT_TO_CARDEMU
TRANS_CARDEMU_TO_SUS
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/pwrseqcmd.c
b/drivers/staging/rtl8821ae/rtl8821ae/pwrseqcmd.c
index 710bc01..ff18871 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/pwrseqcmd.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/pwrseqcmd.c
@@ -82,7 +82,7 @@ bool rtl_hal_pwrseqcmdparsing (struct rtl_priv* rtlpriv, u8
cut_version,
value = value |
(GET_PWR_CFG_VALUE(pwr_cfg_cmd)
&
GET_PWR_CFG_MASK(pwr_cfg_cmd));
- /*Write the value back to sytem
register*/
+ /*Write the value back to system
register*/
rtl_write_byte(rtlpriv, offset, value);
}
break;
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/reg.h
b/drivers/staging/rtl8821ae/rtl8821ae/reg.h
index 09c5f00..beffb42 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/reg.h
+++ b/drivers/staging/rtl8821ae/rtl8821ae/reg.h
@@ -596,13 +596,13 @@
#define IMR_BCNDMAINT3 BIT(23) /* Beacon DMA
Interrupt 3 */
#define IMR_BCNDMAINT2 BIT(22) /* Beacon DMA
Interrupt 2 */
#define IMR_BCNDMAINT1 BIT(21) /* Beacon DMA
Interrupt 1 */
-#define IMR_BCNDOK7 BIT(20) /*
Beacon Queue DMA OK Interrup 7 */
-#define IMR_BCNDOK6 BIT(19) /*
Beacon Queue DMA OK Interrup 6 */
-#define IMR_BCNDOK5 BIT(18) /*
Beacon Queue DMA OK Interrup 5 */
-#define IMR_BCNDOK4 BIT(17) /*
Beacon Queue DMA OK Interrup 4 */
-#define IMR_BCNDOK3 BIT(16) /*
Beacon Queue DMA OK Interrup 3 */
-#define IMR_BCNDOK2 BIT(15) /*
Beacon Queue DMA OK Interrup 2 */
-#define IMR_BCNDOK1 BIT(14) /*
Beacon Queue DMA OK Interrup 1 */
+#define IMR_BCNDOK7 BIT(20) /*
Beacon Queue DMA OK Interrupt 7 */
+#define IMR_BCNDOK6 BIT(19) /*
Beacon Queue DMA OK Interrupt 6 */
+#define IMR_BCNDOK5 BIT(18) /*
Beacon Queue DMA OK Interrupt 5 */
+#define IMR_BCNDOK4 BIT(17) /*
Beacon Queue DMA OK Interrupt 4 */
+#define IMR_BCNDOK3 BIT(16) /*
Beacon Queue DMA OK Interrupt 3 */
+#define IMR_BCNDOK2 BIT(15) /*
Beacon Queue DMA OK Interrupt 2 */
+#define IMR_BCNDOK1 BIT(14) /*
Beacon Queue DMA OK Interrupt 1 */
#define IMR_ATIMEND_E BIT(13) /* ATIM Window End
Extension for Win7 */
#define IMR_TXERR BIT(11) /* Tx
Error Flag Interrupt Status, write 1 clear. */
#define IMR_RXERR BIT(10) /* Rx
Error Flag INT Status, Write 1 clear */
@@ -613,7 +613,7 @@
#define HWSET_MAX_SIZE 512
#define EFUSE_MAX_SECTION 64
#define EFUSE_REAL_CONTENT_LEN 256
-#define EFUSE_OOB_PROTECT_BYTES 18 /* PG data exclude
header, dummy 7 bytes frome CP test and reserved 1byte.*/
+#define EFUSE_OOB_PROTECT_BYTES 18 /* PG data exclude
header, dummy 7 bytes from CP test and reserved 1byte.*/
#define EEPROM_DEFAULT_TSSI 0x0
@@ -1511,7 +1511,7 @@
#define ROFDM0_TXCOEFF5 0xcb4
#define ROFDM0_TXCOEFF6 0xcb8
-/*Path_A RFE cotrol */
+/*Path_A RFE control */
#define RA_RFE_CTRL_8812 0xcb8
/*Path_B RFE control*/
#define RB_RFE_CTRL_8812 0xeb8
@@ -2336,19 +2336,19 @@
#define WOL_REASON_DEAUTH BIT(3)
#define WOL_REASON_FW_DISCONNECT BIT(4)
-#define RA_RFE_PINMUX 0xcb0 /* Path_A RFE cotrol pinmux*/
+#define RA_RFE_PINMUX 0xcb0 /* Path_A RFE control pinmux*/
#define RB_RFE_PINMUX 0xeb0 /* Path_B RFE control pinmux*/
#define RA_RFE_INV 0xcb4
#define RB_RFE_INV 0xeb4
/* RXIQC */
-#define RA_RXIQC_AB 0xc10 /*RxIQ imblance matrix coeff. A
& B*/
-#define RA_RXIQC_CD 0xc14 /*RxIQ imblance matrix coeff. C
& D*/
+#define RA_RXIQC_AB 0xc10 /*RxIQ imbalance matrix coeff. A
& B*/
+#define RA_RXIQC_CD 0xc14 /*RxIQ imbalance matrix coeff. C
& D*/
#define RA_TXSCALE 0xc1c /* Pah_A TX scaling
factor*/
#define RB_TXSCALE 0xe1c /* Path_B TX scaling
factor*/
-#define RB_RXIQC_AB 0xe10 /*RxIQ imblance matrix coeff. A
& B*/
-#define RB_RXIQC_CD 0xe14 /*RxIQ imblance matrix coeff. C
& D*/
+#define RB_RXIQC_AB 0xe10 /*RxIQ imbalance matrix coeff. A
& B*/
+#define RB_RXIQC_CD 0xe14 /*RxIQ imbalance matrix coeff. C
& D*/
#define RXIQC_AC 0x02ff /*bit mask for IQC
matrix element A & C*/
#define RXIQC_BD 0x02ff0000 /*bit mask for IQC
matrix element A & C*/
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/sw.c
b/drivers/staging/rtl8821ae/rtl8821ae/sw.c
index 85a3474..a8d1755 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/sw.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/sw.c
@@ -57,9 +57,9 @@ void rtl8821ae_init_aspm_vars(struct ieee80211_hw *hw)
* 0 - Disable ASPM,
* 1 - Enable ASPM without Clock Req,
* 2 - Enable ASPM with Clock Req,
- * 3 - Alwyas Enable ASPM with Clock Req,
+ * 3 - Always Enable ASPM with Clock Req,
* 4 - Always Enable ASPM without Clock Req.
- * set defult to RTL8192CE:3 RTL8192E:2
+ * set default to RTL8192CE:3 RTL8192E:2
* */
rtlpci->const_pci_aspm = 3;
diff --git a/drivers/staging/rtl8821ae/rtl8821ae/trx.c
b/drivers/staging/rtl8821ae/rtl8821ae/trx.c
index f82ed51..5f32464 100644
--- a/drivers/staging/rtl8821ae/rtl8821ae/trx.c
+++ b/drivers/staging/rtl8821ae/rtl8821ae/trx.c
@@ -244,7 +244,7 @@ static void _rtl8821ae_query_rxphystatus(struct
ieee80211_hw *hw,
cck_agc_rpt = cck_buf->cck_agc_rpt;
/* (1)Hardware does not provide RSSI for CCK */
- /* (2)PWDB, Average PWDB cacluated by
+ /* (2)PWDB, Average PWDB calculated by
* hardware (for rate adaptive) */
if (ppsc->rfpwr_state == ERFON)
cck_highpwr = (u8) rtl_get_bbreg(hw,
RFPGA0_XA_HSSIPARAMETER2,
@@ -363,7 +363,7 @@ static void _rtl8821ae_query_rxphystatus(struct
ieee80211_hw *hw,
pstatus->rx_mimo_signalstrength[i] = (u8) rssi;
}
- /* (2)PWDB, Average PWDB cacluated by
+ /* (2)PWDB, Average PWDB calculated by
* hardware (for rate adaptive) */
rx_pwr_all = ((p_drvinfo->pwdb_all >> 1) & 0x7f) - 110;
@@ -603,7 +603,7 @@ bool rtl8821ae_rx_query_desc(struct ieee80211_hw *hw,
/* hw will set status->decrypted true, if it finds the
* frame is open data frame or mgmt frame. */
- /* So hw will not decryption robust managment frame
+ /* So hw will not decryption robust management frame
* for IEEE80211w but still set status->decrypted
* true, so here we should set it back to undecrypted
* for IEEE80211w frame, and mac80211 sw will help
--
1.9.0
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
