Convert the remaining printk messsages in this driver to dev_{level}.
Signed-off-by: H Hartley Sweeten <[email protected]>
Cc: Ian Abbott <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
---
drivers/staging/comedi/drivers/pcl818.c | 29 +++++++++++++++--------------
1 file changed, 15 insertions(+), 14 deletions(-)
diff --git a/drivers/staging/comedi/drivers/pcl818.c
b/drivers/staging/comedi/drivers/pcl818.c
index 15b4247..cacdca0 100644
--- a/drivers/staging/comedi/drivers/pcl818.c
+++ b/drivers/staging/comedi/drivers/pcl818.c
@@ -463,10 +463,10 @@ conv_finish:
outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */
if ((low & 0xf) != devpriv->act_chanlist[devpriv->act_chanlist_pos]) {
/* dropout! */
- printk
- ("comedi: A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
- (low & 0xf),
- devpriv->act_chanlist[devpriv->act_chanlist_pos]);
+ dev_dbg(dev->class_dev,
+ "A/D mode1/3 IRQ - channel dropout %x!=%x !\n",
+ (low & 0xf),
+ devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@@ -532,11 +532,11 @@ static irqreturn_t interrupt_pcl818_ai_mode13_dma(int
irq, void *d)
for (i = 0; i < len; i++) {
if ((ptr[bufptr] & 0xf) !=
devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
- printk
- ("comedi: A/D mode1/3 DMA - channel dropout
%d(card)!=%d(chanlist) at %d !\n",
- (ptr[bufptr] & 0xf),
- devpriv->act_chanlist[devpriv->act_chanlist_pos],
- devpriv->act_chanlist_pos);
+ dev_dbg(dev->class_dev,
+ "A/D mode1/3 DMA - channel dropout
%d(card)!=%d(chanlist) at %d !\n",
+ (ptr[bufptr] & 0xf),
+
devpriv->act_chanlist[devpriv->act_chanlist_pos],
+ devpriv->act_chanlist_pos);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@@ -609,10 +609,10 @@ static irqreturn_t interrupt_pcl818_ai_mode13_fifo(int
irq, void *d)
for (i = 0; i < len; i++) {
lo = inb(dev->iobase + PCL818_FI_DATALO);
if ((lo & 0xf) !=
devpriv->act_chanlist[devpriv->act_chanlist_pos]) { /* dropout! */
- printk
- ("comedi: A/D mode1/3 FIFO - channel dropout %d!=%d
!\n",
- (lo & 0xf),
- devpriv->act_chanlist[devpriv->act_chanlist_pos]);
+ dev_dbg(dev->class_dev,
+ "A/D mode1/3 FIFO - channel dropout %d!=%d !\n",
+ (lo & 0xf),
+
devpriv->act_chanlist[devpriv->act_chanlist_pos]);
pcl818_ai_cancel(dev, s);
s->async->events |= COMEDI_CB_EOA | COMEDI_CB_ERROR;
comedi_event(dev, s);
@@ -1249,7 +1249,8 @@ static int pcl818_attach(struct comedi_device *dev,
struct comedi_devconfig *it)
if (dma < 1)
goto no_dma; /* DMA disabled */
if (((1 << dma) & board->DMAbits) == 0) {
- printk(KERN_ERR "DMA is out of allowed range, FAIL!\n");
+ dev_err(dev->class_dev,
+ "DMA is out of allowed range, FAIL!\n");
return -EINVAL; /* Bad DMA */
}
ret = request_dma(dma, dev->board_name);
--
1.8.4.4
_______________________________________________
devel mailing list
[email protected]
http://driverdev.linuxdriverproject.org/mailman/listinfo/driverdev-devel
