Hi, All
This is the patch set to add the CVT/GTF algorithm in kernel space.
They are based on
the CVT/GTF function in xserver. But the CVT/GTF algorithm in xserver is
realized by using float-point
calculation. And the float-point calculation had better be avoided in kernel
space. I translate them
by using 32-bit integer calculation.
Patch 1/2. Add the CVT algorithm .
The CVT function can be called to generate the required modeline based
on the input parameters
Patch 2/2. Add the GTF algorithm
The GTF function can be called to generate the required modeline based
on the input parameters.
Welcome the comments.
Best regards.
Yakui
------------------------------------------------------------------------------
The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your
production scanning environment may not be a perfect world - but thanks to
Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700
Series Scanner you'll get full speed at 300 dpi even with all image
processing features enabled. http://p.sf.net/sfu/kodak-com
--
_______________________________________________
Dri-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dri-devel
