With Linux 2.6.29-rc3-00158-g33bfad5, I get the following logged and no
video output (the monitor starts cycling between all inputs, searching
for a signal) when I run "modprobe i915 modeset=1":
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: setting latency timer to 64
i2c-adapter i2c-2: unable to read EDID block.
pci 0000:00:02.0: LVDS-1: no EDID data
i2c-adapter i2c-2: readbytes: ack/nak timeout
i2c-adapter i2c-2: unable to read EDID block.
pci 0000:00:02.0: LVDS-1: no EDID data
i2c-adapter i2c-3: unable to read EDID block.
pci 0000:00:02.0: DVI-D-1: no EDID data
[drm] TV-13: set mode NTSC 480i 0
allocated 800x600 fb: 0x00fdf000, bo ffff88007736b840
Console: switching to colour frame buffer device 100x37
[drm] LVDS-8: set mode 800x600 15
fb0: inteldrmfb frame buffer device
registered panic notifier
[drm] Initialized i915 1.6.0 20080730 on minor 0
The machine is a Mac mini:
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller [8086:27a2] (rev 03)
Here's what xrandr has to say, in case that's useful:
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 1680 x 1680
VGA disconnected (normal left inverted right x axis y axis)
TMDS-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis)
474mm x 296mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 59.9
720x400 70.1
TV disconnected (normal left inverted right x axis y axis)
--
Paul Collins
Wellington, New Zealand
Dag vijandelijk luchtschip de huismeester is dood
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
--
_______________________________________________
Dri-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dri-devel
