I just read an article on LWN's kernel page about plans to remove
tasklets, and I thought I'd explain what the DRM is using tasklets for.
Maybe there's other ways to satisfy the requirements equally well or
even better.
The i915 driver uses a tasklet to make sure a GL buffer swap blit or
flip takes effect (or at least starts in the case of a blit) during the
vertical blank period, to avoid tearing. I chose a tasklet for this
purpose because:
* The traditional method of the vertical blank interrupt waking up
the user process, which would then emit the buffer swap
commands, didn't even come close to avoiding tearing. So I
suspect a workqueue wouldn't cut it either.
* The processing of scheduled buffer swaps could potentially take
a long time, so doing it in hardirq context could cause high IRQ
latency.
* It requires holding the DRM lock, so the 'each tasklet can only
run once at a time' restriction is fine.
I'm looking forward to any suggestions what to do with this in case
tasklets disappear, and I'll gladly provide further clarification on the
requirements.
--
Earthling Michel Dänzer | http://tungstengraphics.com
Libre software enthusiast | Debian, X and DRI developer
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
--
_______________________________________________
Dri-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dri-devel
