http://bugzilla.kernel.org/show_bug.cgi?id=6082

           Summary: when making use of the drm the wireless card stops
                    working
    Kernel Version: 2.6.15.1
            Status: NEW
          Severity: high
             Owner: [EMAIL PROTECTED]
         Submitter: [EMAIL PROTECTED]


Most recent kernel where this bug did not occur:

2.6.15.1 i tried some previous version and it also happends

Distribution:

Debian, i compiled the kernel, Mesa and XOrg

Hardware Environment:

Dell Latitude D610.
Pentium Centrino 2GHz, 1Gb RAM
wired network interface: tg3
wireless network interface: ipw2200
video card: ATI M300

Output of lspci:

0000:00:00.0 Host bridge: Intel Corporation Mobile 915GM/PM/GMS/910GML Express
Processor to DRAM Controller (rev 03)
0000:00:01.0 PCI bridge: Intel Corporation Mobile 915GM/PM Express PCI Express
Root Port (rev 03)
0000:00:1c.0 PCI bridge: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family)
PCI Express Port 1 (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #1 (rev 03)
0000:00:1d.1 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #2 (rev 03)
0000:00:1d.2 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #3 (rev 03)
0000:00:1d.3 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB UHCI #4 (rev 03)
0000:00:1d.7 USB Controller: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6
Family) USB2 EHCI Controller (rev 03)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev d3)
0000:00:1e.2 Multimedia audio controller: Intel Corporation
82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97 Audio Controller (rev 03)
0000:00:1e.3 Modem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) AC'97
Modem Controller (rev 03)
0000:00:1f.0 ISA bridge: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge
(rev 03)
0000:00:1f.2 IDE interface: Intel Corporation 82801FBM (ICH6M) SATA Controller
(rev 03)
0000:00:1f.3 SMBus: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus
Controller (rev 03)
0000:01:00.0 VGA compatible controller: ATI Technologies Inc M22 [Radeon
Mobility M300]
0000:02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit
Ethernet PCI Express (rev 01)
0000:03:01.0 CardBus bridge: Texas Instruments PCI6515 Cardbus Controller
0000:03:01.5 Communication controller: Texas Instruments PCI6515 SmartCard
Controller
0000:03:03.0 Network controller: Intel Corporation PRO/Wireless 2915ABG MiniPCI
Adapter (rev 05)


Software Environment:

XOrg CVS HEAD
MESA CVS HEAD
Linux 2.6.15.1

Problem Description:

When i run an Xserver with the glx module so that it can use direct rendering
the wireless network interface stops working. The wired network interfaces 
works ok.

i get the following output on the screen: Disabling IRQ #169

I get this on the logs:

Jan 30 01:17:59 calisto kernel: irq 169: nobody cared (try booting with the
"irqpoll" option)
Jan 30 01:17:59 calisto kernel:  [__report_bad_irq+43/105]
__report_bad_irq+0x2b/0x69
Jan 30 01:17:59 calisto kernel:  [note_interrupt+107/143] 
note_interrupt+0x6b/0x8f
Jan 30 01:17:59 calisto kernel:  [__do_IRQ+104/143] __do_IRQ+0x68/0x8f
Jan 30 01:17:59 calisto kernel:  [do_IRQ+29/40] do_IRQ+0x1d/0x28
Jan 30 01:17:59 calisto kernel:  [common_interrupt+26/32] 
common_interrupt+0x1a/0x20
Jan 30 01:17:59 calisto kernel:  [pg0+949345105/1069827072]
acpi_processor_idle+0x153/0x2bd [processor]
Jan 30 01:17:59 calisto kernel:  [cpu_idle+63/87] cpu_idle+0x3f/0x57
Jan 30 01:17:59 calisto kernel:  [start_kernel+315/317] start_kernel+0x13b/0x13d
Jan 30 01:17:59 calisto kernel: handlers:
Jan 30 01:17:59 calisto kernel: [usb_hcd_irq+0/79] (usb_hcd_irq+0x0/0x4f)
Jan 30 01:17:59 calisto kernel: [usb_hcd_irq+0/79] (usb_hcd_irq+0x0/0x4f)
Jan 30 01:17:59 calisto kernel: [pg0+947762531/1069827072]
(snd_intel8x0_interrupt+0x0/0x1b7 [snd_intel8x0])
Jan 30 01:17:59 calisto kernel: [pg0+944433224/1069827072]
(tg3_interrupt_tagged+0x0/0xba [tg3])
Jan 30 01:17:59 calisto kernel: Disabling IRQ #169

i compiled the kernel with and without CONFIG_PREEMPT_NONE=y, the result is the
same.

Steps to reproduce: Just run an Xserver with the dri and glx modules

------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.


-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642
--
_______________________________________________
Dri-devel mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/dri-devel

Reply via email to