# > I have aspire 1300, with s3 savage twister (8d02), # > # > http://62.44.212.64:8080/s3_ProSavage_KN133/ # > # > look there. I compiled some time ago savage cvs and dri is now # > enabled, but I # > think it isn't still working. # # You fps in glxgears do seem pretty slow. run "ldd /path/to/glxgears" # and see what version of libGL it's using. you may have an old version # floating around that glxgears is using. # # Alex # # > How should I first help? More info about my computer and # > configuration? Test # > some settings specially? # > # > edie
I compiled and installed newest (2004-04-02) cvs dri trunk. At least now real 3d acceleration works, I noticed it for example with watching movie with softened picture. What I noticed, Option "AGPMode" "4" or "2" are even little slower than "1" (according to glxgears). What might cause this? Some mtrr settings error? My Xfree log shows some errors with setting mtrr. http://62.44.212.64:8080/aspire1300/s3_ProSavage_KN133/mtrr http://62.44.212.64:8080/aspire1300/s3_ProSavage_KN133/XFree86.0.log_new_dri_cvs_trunk http://62.44.212.64:8080/aspire1300/s3_ProSavage_KN133/glxgears_new_dri_cvs_trunk glxgears is done with Option "AGPMode" "1" and it was fastest according to glxgears. Edie ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click -- _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
