On Tue, Dec 10, 2002 at 05:14:37PM +0000, Steven Newbury wrote: > I have got DRI running with Dual Screens with DRI working on display > :0.0 and Indirect rendering on :0.1. > > If I attempt to enable DRI on the second screen if fails to open > /dev/dri/card0 because it is busy. It is ready used for the first > screen. On failing to access the device DRI is then disabled, however > since it already succefully enabled DRI, the driver gets confused later. > > Is there any mechanism that can be implemented to share the device > between both screens? I am not looking to get Xinerama working at the > moment (leave that for later). The ATI fglrx drivers claim to work with > 2 Screens, not that I got them working, so it must be posible...
It is possible, but the open source drivers do not support it. -- Smile! http://antwrp.gsfc.nasa.gov/apod/ap990315.html ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
