Brian Paul wrote: > Brian Paul wrote: > >> Brian Paul wrote: >> >>> >>> I've created a new DRI branch: mesa-4-1-branch >>> >>> I'm in the process of porting all the DRI drivers to the new Mesa 4.1 >>> code. >>> I'll be checking in changes soon, but don't expect anything to run or >>> even >>> compile. I'll post again when I think it's usable. >> >> >> >> OK, it's compiling and the r200 driver seems to be working (though I >> only ran a few Mesa demos so far). >> >> If you want to try the branch you'll need to check out a Mesa CVS trunk >> tree and the DRI mesa-4-1-branch branch. Edit xc/config/cf/host.def to >> set the MesaSrcDir to point into the Mesa tree. >> >> Disclaimer: you're on your own if you try it and have trouble. I've got >> a lot of testing to do yet to iron out any obvious problems. > > > > I've tested the radeon, r200 and tdfx drivers and they seem OK. > > I can't test the i810, i830, r128, mga, etc drivers (either because I don't > have the right hardware or mine's broke). Some of the other drivers (like > sis, ffb, etc) aren't enabled in the build process and haven't been ported. > I'm not sure what the status of those drivers is. > > I'd appreciate it if people could start testing this branch, esp the > drivers I haven't tested. One thing in particular to check is the > Mesa/demos/readpix program - make sure front/back buffer rendering is > working. That's something that I've had to change in all the drivers.
Actually, I'm not done with this yet. I've found more changes (simplifications) to make to the glDraw/ReadBuffer code. I should check it all in within a few hours. -Brian ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
