On Sat, 18 May 2002 15:01:51 +0200
Felix K�hling <[EMAIL PROTECTED]> wrote:
> For this test I compiled everything with gcc-2.95.4. I had a different
> problem after compiling with gcc-3.0. I have to try that again and check
> for compile errors. The problem was that the X server segfaulted on
> startup. I'll report more details later.
Ok, I recompiled with gcc-3.0 again. There are no errors in world.log.
The X-server segfaults on startup. Note that I had a working Xserver+DRI
compiled with gcc-3.0 before Leif's last changes.
These are the relevant parts of my logfiles:
kern.log:
[...]
May 18 16:18:28 viking kernel: [drm] AGP 0.99 on VIA Apollo KT133 @ 0xd0000000 64MB
May 18 16:18:28 viking kernel: [drm] Initialized mach64 1.0.0 20020417 on minor 0
May 18 16:18:29 viking kernel: [drm] Setting FIFO size to 128 entries
May 18 16:18:29 viking kernel: [drm] Creating pci pool
May 18 16:18:29 viking kernel: [drm] Allocating descriptor table memory
May 18 16:18:29 viking kernel: [drm] descriptor table: cpu addr: 0xc0268000, bus addr:
0x00268000
May 18 16:18:29 viking kernel: [drm] Starting DMA test...
May 18 16:18:29 viking kernel: [drm] starting DMA transfer...
May 18 16:18:29 viking kernel: [drm] waiting for idle...
May 18 16:18:29 viking kernel: [drm] waiting for idle...done
May 18 16:18:29 viking kernel: [drm] DMA test succeeded, using asynchronous DMA mode
XFree86.1.log:
[...]
(==) ATI(0): Write-combining range (0xd4000000,0x800000)
(II) ATI(0): [drm] SAREA 2200+1212: 3412
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device)
drmOpenDevice: Open failed
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmGetBusid returned ''
(II) ATI(0): [drm] loaded kernel module for "mach64" driver
(II) ATI(0): [drm] created "mach64" driver at busid "PCI:1:0:0"
(II) ATI(0): [drm] added 8192 byte SAREA at 0xd08bf000
(II) ATI(0): [drm] mapped SAREA 0xd08bf000 to 0x40015000
(II) ATI(0): [drm] framebuffer handle = 0xd4000000
(II) ATI(0): [drm] added 1 reserved context for kernel
(II) ATI(0): [agp] Using AGP 1x Mode
(II) ATI(0): [agp] Using 8 MB AGP aperture
(II) ATI(0): [agp] Mode 0x1f000201 [AGP 0x1106/0x0305; Card 0x1002/0x474d]
(II) ATI(0): [agp] 8192 kB allocated with handle 0xd10c3000
(II) ATI(0): [agp] Using 2 MB DMA buffer size
(II) ATI(0): [agp] vertex buffers handle = 0xd0000000
(II) ATI(0): [agp] Vertex buffers mapped at 0x40a38000
(II) ATI(0): [agp] AGP texture region handle = 0xd0200000
(II) ATI(0): [agp] AGP Texture region mapped at 0x40c38000
(II) ATI(0): [drm] register handle = 0xd6000000
(II) ATI(0): [dri] Visual configs initialized
(II) ATI(0): [dri] Block 0 base at 0xd6000400
(II) ATI(0): Memory manager initialized to (0,0) (640,1637)
(II) ATI(0): Reserved back buffer from (0,480) to (640,960)
(II) ATI(0): Reserved depth buffer from (0,960) to (640,1440)
(II) ATI(0): Reserved 6144 kb for textures at offset 0x1ff900
(II) ATI(0): Largest offscreen areas (with overlaps):
(II) ATI(0): 640 x 6072 rectangle at 0,480
(II) ATI(0): 512 x 6073 rectangle at 0,480
(**) ATI(0): Option "XaaNoScreenToScreenCopy"
(II) ATI(0): Using XFree86 Acceleration Architecture (XAA)
Setting up tile and stipple cache:
32 128x128 slots
18 256x256 slots
7 512x512 slots
(==) ATI(0): Backing store disabled
(==) ATI(0): Silken mouse enabled
(**) Option "dpms"
(**) ATI(0): DPMS enabled
(II) ATI(0): X context handle = 0x00000001
(II) ATI(0): [drm] installed DRM signal handler
(II) ATI(0): [DRI] installation complete
(II) ATI(0): [drm] Added 128 16384 byte DMA buffers
Fatal server error:
Caught signal 11. Server aborting
I also got a debugger backtrace after the segfault:
Program received signal SIGSEGV, Segmentation fault.
0x086c0c3c in ?? ()
#0 0x086c0c3c in ?? ()
#1 0x086bef1b in ?? ()
#2 0x080bfe18 in AddScreen (pfnInit=0x86be944, argc=5, argv=0xbffffa04)
at main.c:768
#3 0x0806c425 in InitOutput (pScreenInfo=0x81cda00, argc=5, argv=0xbffffa04)
at xf86Init.c:819
#4 0x080bf378 in main (argc=5, argv=0xbffffa04, envp=0xbffffa1c) at main.c:380
I know, this backtrace is not very helpful. Is there a way to get the ??
resolved?
Regards,
Felix
__\|/__ ___ ___ ___
__Tsch��_______\_6 6_/___/__ \___/__ \___/___\___You can do anything,___
_____Felix_______\�/\ \_____\ \_____\ \______U___just not everything____
[EMAIL PROTECTED] >o<__/ \___/ \___/ at the same time!
_______________________________________________________________
Hundreds of nodes, one monster rendering program.
Now that's a super model! Visit http://clustering.foundries.sf.net/
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
