If anyone has information on direct rendering for the 3dlabs Oxygen VX1 32MB AGP I 
would appreciate some input.  I am trying to get direct rendering enabled in Xfree 
4.2.0.  So far I have not had any luck.

I am running kernel 2.4.18 with DRI in the kernel.  I have made the gamma drivers with 
the DRI that comes iwth the 4.2.0 source.  I can load the gamma.o gamma_dma.o and 
gamma_drv.o drivers.  Xfree loads the glint_drv.o from just fine.  I think I am 
missing something or maybe direct rendering isn't even supported.  Here is my log:

XFree86 Version 4.2.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 18 January 2002
        If the server is older than 6-12 months, or if your card is
        newer than the above date, look for a newer version before
        reporting problems.  (See http://www.XFree86.Org/)
Build Operating System: Linux 2.4.18 i686 [ELF] 
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Fri May  3 01:10:30 2002
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Screen 1" (0)
(**) |   |-->Monitor "My Monitor"
(**) |   |-->Device "3DLabs Oxygen GMX"
(**) |-->Input Device "Mouse1"
(**) |-->Input Device "Keyboard1"
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "itouch"
(**) XKB: model: "itouch"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) FontPath set to 
"/usr/X11R6/lib/X11/fonts/local/,/usr/X11R6/lib/X11/fonts/misc/,/usr/X11R6/lib/X11/fonts/75dpi/:unscaled,/usr/X11R6/lib/X11/fonts/100dpi/:unscaled,/usr/X11R6/lib/X11/fonts/Type1/,/usr/X11R6/lib/X11/fonts/Speedo/,/usr/X11R6/lib/X11/fonts/75dpi/,/usr/X11R6/lib/X11/fonts/100dpi/"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
        XFree86 ANSI C Emulation: 0.1
        XFree86 Video Driver: 0.5
        XFree86 XInput driver : 0.3
        XFree86 Server Extension : 0.1
        XFree86 Font Renderer : 0.3
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0691 card 147b,a204 rev c4 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,8598 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:07:0: chip 1106,0686 card 147b,0000 rev 40 class 06,01,00 hdr 80
(II) PCI: 00:07:4: chip 1106,3057 card 0000,0000 rev 40 class 06,80,00 hdr 00
(II) PCI: 00:0a:0: chip 9005,0010 card 9005,a180 rev 00 class 01,00,00 hdr 00
(II) PCI: 00:0c:0: chip 10b7,9200 card 10b7,1000 rev 6c class 02,00,00 hdr 00
(II) PCI: 00:0d:0: chip 1102,0002 card 1102,8027 rev 08 class 04,01,00 hdr 80
(II) PCI: 00:0d:1: chip 1102,7002 card 1102,0020 rev 08 class 09,80,00 hdr 80
(II) PCI: 01:00:0: chip 3d3d,000a card 3d3d,0125 rev 01 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) LoadModule: "scanpci"
(II) Loading /usr/X11R6/lib/modules/libscanpci.a
(II) Module scanpci: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(II) UnloadModule: "scanpci"
(II) Unloading /usr/X11R6/lib/modules/libscanpci.a
(II) Host-to-PCI bridge:
(II) PCI-to-ISA bridge:
(II) PCI-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (-1,0,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus 0 I/O range:
        [0] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x0c (VGA_EN is set)
(II) Bus 1 I/O range:
(II) Bus 1 non-prefetchable memory range:
        [0] -1  0xda000000 - 0xdbffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
        [0] -1  0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
(II) Bus -1: bridge is at (0:7:0), (0,-1,0), BCTRL: 0x08 (VGA_EN is set)
(II) Bus -1 I/O range:
(II) Bus -1 non-prefetchable memory range:
(II) Bus -1 prefetchable memory range:
(--) PCI:*(1:0:0) 3Dlabs GLINT Permedia 3 rev 1, Mem @ 0xdb000000/17, 0xd0000000/26, 
0xd4000000/26
(II) Addressable bus resource ranges are
        [0] -1  0x00000000 - 0xffffffff (0x0) MX[B]
        [1] -1  0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
        [0] -1  0xdd001000 - 0xdd00107f (0x80) MX[B]
        [1] -1  0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
        [2] -1  0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
        [3] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
        [4] -1  0xdb000000 - 0xdb01ffff (0x20000) MX[B](B)
        [5] -1  0x0000e800 - 0x0000e807 (0x8) IX[B]
        [6] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
        [7] -1  0x0000e000 - 0x0000e07f (0x80) IX[B]
        [8] -1  0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
        [0] -1  0xdd001000 - 0xdd00107f (0x80) MX[B]
        [1] -1  0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
        [2] -1  0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
        [3] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
        [4] -1  0xdb000000 - 0xdb01ffff (0x20000) MX[B](B)
        [5] -1  0x0000e800 - 0x0000e807 (0x8) IX[B]
        [6] -1  0x0000e400 - 0x0000e41f (0x20) IX[B]
        [7] -1  0x0000e000 - 0x0000e07f (0x80) IX[B]
        [8] -1  0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0x0000ffff - 0x0000ffff (0x1) IX[B]
        [6] -1  0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0xdd001000 - 0xdd00107f (0x80) MX[B]
        [6] -1  0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
        [7] -1  0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
        [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
        [9] -1  0xdb000000 - 0xdb01ffff (0x20000) MX[B](B)
        [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [12] -1 0x0000e800 - 0x0000e807 (0x8) IX[B]
        [13] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
        [14] -1 0x0000e000 - 0x0000e07f (0x80) IX[B]
        [15] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Server Extension
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.1
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.1.10
        Module class: XFree86 Font Renderer
        ABI class: XFree86 Font Renderer, version 0.3
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Server Extension, version 0.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "glint"
(II) Loading /usr/X11R6/lib/modules/drivers/glint_drv.o
(II) Module glint: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 Video Driver
        ABI class: XFree86 Video Driver, version 0.5
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        Module class: XFree86 XInput Driver
        ABI class: XFree86 XInput driver, version 0.3
(II) GLINT: driver for 3Dlabs chipsets: gamma, gamma2, ti_pm2, ti_pm, r4,
        pm4, pm3, pm2v, pm2, pm, 300sx, 500tx, mx, delta
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset pm3 found
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0xdd001000 - 0xdd00107f (0x80) MX[B]
        [6] -1  0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
        [7] -1  0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
        [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
        [9] -1  0xdb000000 - 0xdb01ffff (0x20000) MX[B](B)
        [10] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [11] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [12] -1 0x0000e800 - 0x0000e807 (0x8) IX[B]
        [13] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
        [14] -1 0x0000e000 - 0x0000e07f (0x80) IX[B]
        [15] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) resource ranges after probing:
        [0] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [1] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [2] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [3] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [4] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [5] -1  0xdd001000 - 0xdd00107f (0x80) MX[B]
        [6] -1  0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
        [7] -1  0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
        [8] -1  0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
        [9] -1  0xdb000000 - 0xdb01ffff (0x20000) MX[B](B)
        [10] 0  0x000a0000 - 0x000affff (0x10000) MS[B]
        [11] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [12] 0  0x000b8000 - 0x000bffff (0x8000) MS[B]
        [13] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [14] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [15] -1 0x0000e800 - 0x0000e807 (0x8) IX[B]
        [16] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
        [17] -1 0x0000e000 - 0x0000e07f (0x80) IX[B]
        [18] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [19] 0  0x000003b0 - 0x000003bb (0xc) IS[B]
        [20] 0  0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) GLINT(0): Depth 24, (--) framebuffer bpp 32
(==) GLINT(0): RGB weight 888
(==) GLINT(0): Default visual is TrueColor
(==) GLINT(0): Using gamma correction (1.0, 1.0, 1.0)
(==) GLINT(0): Using HW cursor
(--) GLINT(0): Not using Linux framebuffer device
(--) GLINT(0): Chipset: "pm3"
(--) GLINT(0): Linear framebuffer at 0xD4000000
(--) GLINT(0): MMIO registers at 0xDB000000
(II) GLINT(0): Using SDRAM memory
(--) GLINT(0): VideoRAM: 32768 kByte
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 0.1.0
        ABI class: XFree86 Video Driver, version 0.5
(--) GLINT(0): FIFO Size is 120 DWORDS
(==) GLINT(0): Min pixel clock is 16 MHz
(--) GLINT(0): Max pixel clock is 300 MHz
(II) GLINT(0): My Monitor: Using hsync range of 30.00-96.00 kHz
(II) GLINT(0): My Monitor: Using vrefresh range of 50.00-160.00 Hz
(II) GLINT(0): Clock range:  16.25 to 300.00 MHz
(II) GLINT(0): Not using default mode "320x175" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "360x200" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "320x240" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "400x300" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1024x768" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "512x384" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "576x432" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x480" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "640x512" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1600x1200" (hsync out of range)
(II) GLINT(0): Not using default mode "800x600" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1792x1344" (hsync out of range)
(II) GLINT(0): Not using default mode "896x672" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1856x1392" (hsync out of range)
(II) GLINT(0): Not using default mode "928x696" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "1920x1440" (hsync out of range)
(II) GLINT(0): Not using default mode "960x720" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "416x312" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "700x525" (bad mode clock/interlace/doublescan)
(II) GLINT(0): Not using default mode "800x512" (bad mode clock/interlace/doublescan)
(--) GLINT(0): Virtual size is 1280x1024 (pitch 1280)
(**) GLINT(0): Default mode "1280x1024": 157.5 MHz, 91.1 kHz, 85.0 Hz
(II) GLINT(0): Modeline "1280x1024"  157.50  1280 1344 1504 1728  1024 1025 1028 1072 
+hsync +vsync
(==) GLINT(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 ANSI C Emulation, version 0.1
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.0.0
        ABI class: XFree86 Video Driver, version 0.5
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Loading /usr/X11R6/lib/modules/libi2c.a
(II) Module i2c: vendor="The XFree86 Project"
        compiled for 4.2.0, module version = 1.2.0
        ABI class: XFree86 Video Driver, version 0.5
(II) GLINT(0): I2C bus "DDC" initialized.
(II) GLINT(0): I2C bus "Video" initialized.
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] 0   0xd4000000 - 0xd7ffffff (0x4000000) MX[B]
        [1] 0   0xd0000000 - 0xd3ffffff (0x4000000) MX[B]
        [2] 0   0xdb000000 - 0xdb01ffff (0x20000) MX[B]
        [3] -1  0xffe00000 - 0xffffffff (0x200000) MX[B](B)
        [4] -1  0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [5] -1  0x000f0000 - 0x000fffff (0x10000) MX[B]
        [6] -1  0x000c0000 - 0x000effff (0x30000) MX[B]
        [7] -1  0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [8] -1  0xdd001000 - 0xdd00107f (0x80) MX[B]
        [9] -1  0xd8000000 - 0xd9ffffff (0x2000000) MX[B]
        [10] -1 0xd4000000 - 0xd7ffffff (0x4000000) MX[B](B)
        [11] -1 0xd0000000 - 0xd3ffffff (0x4000000) MX[B](B)
        [12] -1 0xdb000000 - 0xdb01ffff (0x20000) MX[B](B)
        [13] 0  0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [14] 0  0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [15] 0  0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [16] -1 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [17] -1 0x00000000 - 0x000000ff (0x100) IX[B]
        [18] -1 0x0000e800 - 0x0000e807 (0x8) IX[B]
        [19] -1 0x0000e400 - 0x0000e41f (0x20) IX[B]
        [20] -1 0x0000e000 - 0x0000e07f (0x80) IX[B]
        [21] -1 0x0000dc00 - 0x0000dcff (0x100) IX[B]
        [22] 0  0x000003b0 - 0x000003bb (0xc) IS[B](OprD)
        [23] 0  0x000003c0 - 0x000003df (0x20) IS[B](OprD)
(==) GLINT(0): Write-combining range (0xd4000000,0x2000000)
(II) GLINT(0): I2C device "DDC:ddc2" registered.
(II) GLINT(0): I2C device "DDC:ddc2" removed.
(II) GLINT(0): Using XFree86 Acceleration Architecture (XAA)
        Screen to screen bit blits
        Solid filled rectangles
        8x8 mono pattern filled rectangles
        Indirect CPU to Screen color expansion
        Solid Horizontal and Vertical Lines
        Scanline Image Writes
        Offscreen Pixmaps
        Driver provided WriteBitmap replacement
        Driver provided WritePixmap replacement
        Setting up tile and stipple cache:
                32 128x128 slots
                14 256x256 slots
                5 512x512 slots
(==) GLINT(0): Backing store disabled
(==) GLINT(0): Silken mouse enabled
(II) GLINT(0): direct rendering disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(**) Option "Protocol" "IMPS/2"
(**) Mouse1: Protocol: "IMPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(==) Mouse1: Buttons: 3
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!


Thanks for your time,
William

_______________________________________________________________

Have big pipes? SourceForge.net is looking for download mirrors. We supply
the hardware. You get the recognition. Email Us: [EMAIL PROTECTED]
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel

Reply via email to