From: Jérôme de Bretagne <[email protected]> Align the Surface Pro 9 5G with the other sc8280xp-based models as done in this patch series [1] from Bartosz.
Add a node for the PMU of the WCN6855 and rework the inputs of the wifi and bluetooth nodes to consume the PMU's outputs. With this we can drop the regulator-always-on properties from vreg_s11b and vreg_s12b as they will now be enabled by the power sequencing driver. Use the fixed BT vddrfa1p7-supply supply name to align with bindings. [1] https://lore.kernel.org/all/[email protected]/ Cc: Bartosz Golaszewski <[email protected]> Signed-off-by: Jérôme de Bretagne <[email protected]> --- .../boot/dts/qcom/sc8280xp-microsoft-arcata.dts | 103 ++++++++++++++++++--- 1 file changed, 89 insertions(+), 14 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts index 4daff3a0ecf48ad2081a2fe98910adf0debef88f..52d8e9527bd26f97305905650e2486a59e6d7157 100644 --- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts @@ -357,6 +357,70 @@ usb1_sbu_mux: endpoint { }; }; }; + + wcn6855-pmu { + compatible = "qcom,wcn6855-pmu"; + + pinctrl-0 = <&bt_default>, <&wlan_en>; + pinctrl-names = "default"; + + wlan-enable-gpios = <&tlmm 134 GPIO_ACTIVE_HIGH>; + bt-enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + vddio-supply = <&vreg_s10b>; + vddaon-supply = <&vreg_s12b>; + vddpmu-supply = <&vreg_s12b>; + vddpmumx-supply = <&vreg_s12b>; + vddpmucx-supply = <&vreg_s12b>; + vddrfa0p95-supply = <&vreg_s12b>; + vddrfa1p3-supply = <&vreg_s11b>; + vddrfa1p9-supply = <&vreg_s1c>; + vddpcie1p3-supply = <&vreg_s11b>; + vddpcie1p9-supply = <&vreg_s1c>; + + regulators { + vreg_pmu_rfa_cmn_0p8: ldo0 { + regulator-name = "vreg_pmu_rfa_cmn_0p8"; + }; + + vreg_pmu_aon_0p8: ldo1 { + regulator-name = "vreg_pmu_aon_0p8"; + }; + + vreg_pmu_wlcx_0p8: ldo2 { + regulator-name = "vreg_pmu_wlcx_0p8"; + }; + + vreg_pmu_wlmx_0p8: ldo3 { + regulator-name = "vreg_pmu_wlmx_0p8"; + }; + + vreg_pmu_btcmx_0p8: ldo4 { + regulator-name = "vreg_pmu_btcmx_0p8"; + }; + + vreg_pmu_pcie_1p8: ldo5 { + regulator-name = "vreg_pmu_pcie_1p8"; + }; + + vreg_pmu_pcie_0p9: ldo6 { + regulator-name = "vreg_pmu_pcie_0p9"; + }; + + vreg_pmu_rfa_0p8: ldo7 { + regulator-name = "vreg_pmu_rfa_0p8"; + }; + + vreg_pmu_rfa_1p2: ldo8 { + regulator-name = "vreg_pmu_rfa_1p2"; + }; + + vreg_pmu_rfa_1p7: ldo9 { + regulator-name = "vreg_pmu_rfa_1p7"; + }; + }; + }; }; &apps_rsc { @@ -383,7 +447,6 @@ vreg_s11b: smps11 { regulator-min-microvolt = <1272000>; regulator-max-microvolt = <1272000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; }; vreg_s12b: smps12 { @@ -391,7 +454,6 @@ vreg_s12b: smps12 { regulator-min-microvolt = <984000>; regulator-max-microvolt = <984000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-always-on; }; vreg_l3b: ldo3 { @@ -653,6 +715,16 @@ wifi@0 { compatible = "pci17cb,1103"; reg = <0x10000 0x0 0x0 0x0 0x0>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>; + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>; + qcom,calibration-variant = "MS_SP9_5G"; }; }; @@ -837,20 +909,16 @@ &uart2 { bluetooth { compatible = "qcom,wcn6855-bt"; - vddio-supply = <&vreg_s10b>; - vddbtcxmx-supply = <&vreg_s12b>; - vddrfacmn-supply = <&vreg_s12b>; - vddrfa0p8-supply = <&vreg_s12b>; - vddrfa1p2-supply = <&vreg_s11b>; - vddrfa1p7-supply = <&vreg_s1c>; + vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>; + vddaon-supply = <&vreg_pmu_aon_0p8>; + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>; + vddwlmx-supply = <&vreg_pmu_wlmx_0p8>; + vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>; + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>; + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>; + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>; max-speed = <3200000>; - - enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; - swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; - - pinctrl-0 = <&bt_default>; - pinctrl-names = "default"; }; }; @@ -1201,4 +1269,11 @@ reset-pins { bias-disable; }; }; + + wlan_en: wlan-en-state { + pins = "gpio134"; + function = "gpio"; + drive-strength = <8>; + bias-pull-down; + }; }; -- 2.47.3
