From: Frank Li (AI-BOT) <[email protected]>
AI bot review and may be useless.
---
> +static u32 *
> +imx93_pdfc_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
> + struct drm_bridge_state
> *bridge_state,
> + struct drm_crtc_state *crtc_state,
> + struct drm_connector_state
> *conn_state,
> + u32 output_fmt,
> + unsigned int *num_input_fmts)
> +{
> + struct imx93_pdfc *pdfc = bridge_to_imx93_pdfc(bridge);
> + u32 *input_fmts;
> +
> + *num_input_fmts = 0;
> +
> + input_fmts = kmalloc_obj(*input_fmts);
> + if (!input_fmts)
> + return NULL;
Missing kfree(input_fmts) in error path if the switch statement
or subsequent logic fails. Consider allocating a fixed-size array
or using devm_kzalloc() instead.
> + *num_input_fmts = 1;
> +
> + if (!imx93_pdfc_bus_output_fmt_supported(output_fmt)) {
> + dev_dbg(pdfc->dev, "No valid output bus-fmt detected, fallback
> to MEDIA_BUS_FMT_RGB888_1X24\n");
Line exceeds 80 characters (97 chars). Break into two lines.
> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> + return input_fmts;
> + }
> +
> + switch (output_fmt) {
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + case MEDIA_BUS_FMT_RGB565_1X16:
> + input_fmts[0] = output_fmt;
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + case MEDIA_BUS_FMT_FIXED:
> + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
> + break;
> + }
Switch statement lacks default case. Add default case to handle
unexpected format values explicitly.
> +static int imx93_pdfc_bridge_atomic_enable(struct drm_bridge *bridge,
> + struct drm_atomic_state *state)
> +{
> + struct imx93_pdfc *pdfc = bridge_to_imx93_pdfc(bridge);
> + const struct drm_bridge_state *bridge_state;
> + unsigned int mask = PARALLEL_DISP_FORMAT;
> + unsigned int val;
> +
> + bridge_state = drm_atomic_get_new_bridge_state(state, bridge);
> +
> + switch (bridge_state->output_bus_cfg.format) {
> + case MEDIA_BUS_FMT_RGB888_1X24:
> + case MEDIA_BUS_FMT_FIXED:
> + val = FORMAT_RGB888_TO_RGB888;
> + if (pdfc->phy_bus_width == 18) {
> + /*
> + * Can be valid if physical bus limitation exists,
> + * therefore use dev_dbg().
> + */
> + dev_dbg(pdfc->dev, "Truncate two LSBs from each
> color\n");
> + val = FORMAT_RGB888_TO_RGB666;
> + }
> + break;
> + case MEDIA_BUS_FMT_RGB666_1X18:
> + val = FORMAT_RGB888_TO_RGB666;
> +
