On Mon, Feb 23, 2026 at 05:20:46PM +0800, Hermes Wu wrote:
> Add device tree binding documentation for the ITE IT6162 MIPI DSI to
> HDMI 2.0 bridge chip. The IT6162 is an I2C-controlled bridge that
> supports the following configurations:
> 
>   - Single MIPI DSI input: up to 4K @ 30Hz
>   - Dual MIPI DSI input (combined): up to 4K @ 60Hz
> 
> The chip also supports up to 8-channel audio output via 4 I2S data
> channels.
> 
> Signed-off-by: Hermes Wu <[email protected]>
> ---
>  .../bindings/display/bridge/ite,it6162.yaml        | 156 
> +++++++++++++++++++++
>  1 file changed, 156 insertions(+)
> 

Please organize the patch documenting the compatible (DT bindings)
before the patch using that compatible.
See also: 
https://elixir.bootlin.com/linux/v6.14-rc6/source/Documentation/devicetree/bindings/submitting-patches.rst#L46

> diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml 
> b/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml
> new file mode 100644
> index 
> 0000000000000000000000000000000000000000..31f809a83c305447a152e14b20cb39ef1f816911
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6162.yaml
> @@ -0,0 +1,156 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/ite,it6162.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: ITE IT6162 MIPI DSI to HDMI2.0 Bridge
> +
> +maintainers:
> +  - Hermes Wu <[email protected]>
> +
> +description: |
> +  The ITE IT6162 is a high-performance, low-power HDMI bridge that converts
> +  2 MIPI DSI signal to 1 HDMI2.0. It supports 2 MIPI D-PHY 2.0 up to 10Gbps
> +  each DSI port (20Gbps total), compatible with DSI-2 v2.0.
> +
> +  The HDMI transmitter side supports up to 4Kx2K@60Hz resolutions, and is
> +  compliant with HDMI2.0.
> +
> +  For audio, the IT61620 supports up to 8-channel LPCM via I2S (multi-line or

typo - IT6162

With these two changes:

Reviewed-by: Krzysztof Kozlowski <[email protected]>

Best regards,
Krzysztof

Reply via email to