On 2/13/26 00:08, Hamza Mahfooz wrote:
> There should be a mechanism for drivers to respond to flip_done
> timeouts. Since, as it stands it is possible for the display to stall
> indefinitely, necessitating a hard reset. So, introduce a new mechanism
> that tries various methods of recovery with increasing aggression, in
> the following order:
> 
> 1. Force a full modeset (have the compositor reprogram the state from
>    scratch).
> 2. As a last resort, have the driver attempt a vendor specific reset
>    (which they can do by reading the return value of
>    drm_atomic_helper_wait_for_flip_done()).
> 
> Signed-off-by: Hamza Mahfooz <[email protected]>
> ---
> v2: new to the series
> v3: get rid of page_flip_timeout() and have
>     drm_atomic_helper_wait_for_flip_done() return a error.
> ---
>  drivers/gpu/drm/drm_atomic_helper.c | 45 +++++++++++++++++++++++++----
>  include/drm/drm_atomic_helper.h     |  4 +--
>  include/drm/drm_device.h            | 24 +++++++++++++++
>  3 files changed, 66 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c 
> b/drivers/gpu/drm/drm_atomic_helper.c
> index 5840e9cc6f66..6ae1234b9e20 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -42,6 +42,7 @@
>  #include <drm/drm_gem_atomic_helper.h>
>  #include <drm/drm_panic.h>
>  #include <drm/drm_print.h>
> +#include <drm/drm_probe_helper.h>
>  #include <drm/drm_self_refresh_helper.h>
>  #include <drm/drm_vblank.h>
>  #include <drm/drm_writeback.h>
> @@ -1864,11 +1865,15 @@ EXPORT_SYMBOL(drm_atomic_helper_wait_for_vblanks);
>   *
>   * This requires that drivers use the nonblocking commit tracking support
>   * initialized using drm_atomic_helper_setup_commit().
> + *
> + * Returns:
> + * -ETIMEDOUT to indicate that drivers can attempt a vendor reset, 0 
> otherwise.
>   */
> -void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev,
> -                                       struct drm_atomic_state *state)
> +int drm_atomic_helper_wait_for_flip_done(struct drm_device *dev,
> +                                      struct drm_atomic_state *state)
>  {
>       struct drm_crtc *crtc;
> +     int ret = 0;
>       int i;
>  
>       for (i = 0; i < dev->mode_config.num_crtc; i++) {
> @@ -1881,13 +1886,43 @@ void drm_atomic_helper_wait_for_flip_done(struct 
> drm_device *dev,
>                       continue;
>  
>               ret = wait_for_completion_timeout(&commit->flip_done, 10 * HZ);
> -             if (ret == 0)
> -                     drm_err(dev, "[CRTC:%d:%s] flip_done timed out\n",
> -                             crtc->base.id, crtc->name);
> +             if (!ret) {
> +                     switch (dev->reset_phase) {
> +                     case DRM_KMS_RESET_NONE:

That state machine is driver specific and so doesn't belong into DRM.

So please completely nuke that and just return the error code to the driver.

Regards,
Christian.

> +                             drm_err(dev, "[CRTC:%d:%s] flip_done timed 
> out\n",
> +                                     crtc->base.id, crtc->name);
> +                             dev->reset_phase = DRM_KMS_RESET_FORCE_MODESET;
> +                             drm_kms_helper_hotplug_event(dev);
> +                             break;
> +                     case DRM_KMS_RESET_FORCE_MODESET:
> +                             drm_err(dev, "[CRTC:%d:%s] force full modeset 
> failed\n",
> +                                     crtc->base.id, crtc->name);
> +                             dev->reset_phase = DRM_KMS_RESET_VENDOR;
> +                             ret = -ETIMEDOUT;
> +                             break;
> +                     case DRM_KMS_RESET_VENDOR:
> +                             drm_err(dev, "[CRTC:%d:%s] KMS recovery 
> failed!\n",
> +                                     crtc->base.id, crtc->name);
> +                             dev->reset_phase = DRM_KMS_RESET_GIVE_UP;
> +                             break;
> +                     default:
> +                             break;
> +                     }
> +
> +                     goto exit;
> +             }
> +     }
> +
> +     if (dev->reset_phase) {
> +             drm_info(dev, "KMS recovery succeeded!\n");
> +             dev->reset_phase = DRM_KMS_RESET_NONE;
>       }
>  
> +exit:
>       if (state->fake_commit)
>               complete_all(&state->fake_commit->flip_done);
> +
> +     return ret;
>  }
>  EXPORT_SYMBOL(drm_atomic_helper_wait_for_flip_done);
>  
> diff --git a/include/drm/drm_atomic_helper.h b/include/drm/drm_atomic_helper.h
> index 53382fe93537..298c8dff3993 100644
> --- a/include/drm/drm_atomic_helper.h
> +++ b/include/drm/drm_atomic_helper.h
> @@ -79,8 +79,8 @@ int drm_atomic_helper_wait_for_fences(struct drm_device 
> *dev,
>  void drm_atomic_helper_wait_for_vblanks(struct drm_device *dev,
>                                       struct drm_atomic_state *old_state);
>  
> -void drm_atomic_helper_wait_for_flip_done(struct drm_device *dev,
> -                                       struct drm_atomic_state *old_state);
> +int drm_atomic_helper_wait_for_flip_done(struct drm_device *dev,
> +                                      struct drm_atomic_state *old_state);
>  
>  void
>  drm_atomic_helper_update_legacy_modeset_state(struct drm_device *dev,
> diff --git a/include/drm/drm_device.h b/include/drm/drm_device.h
> index bc78fb77cc27..1244d7527e7b 100644
> --- a/include/drm/drm_device.h
> +++ b/include/drm/drm_device.h
> @@ -66,6 +66,23 @@ enum switch_power_state {
>       DRM_SWITCH_POWER_DYNAMIC_OFF = 3,
>  };
>  
> +/**
> + * enum drm_kms_reset_phase - reset phase of drm device
> + */
> +enum drm_kms_reset_phase {
> +     /** @DRM_KMS_RESET_NONE: Not currently attempting recovery */
> +     DRM_KMS_RESET_NONE,
> +
> +     /** @DRM_KMS_RESET_FORCE_MODESET: Force a full modeset */
> +     DRM_KMS_RESET_FORCE_MODESET,
> +
> +     /** @DRM_KMS_RESET_VENDOR: Attempt a vendor reset */
> +     DRM_KMS_RESET_VENDOR,
> +
> +     /** @DRM_KMS_RESET_GIVE_UP: All recovery methods failed */
> +     DRM_KMS_RESET_GIVE_UP,
> +};
> +
>  /**
>   * struct drm_device - DRM device structure
>   *
> @@ -375,6 +392,13 @@ struct drm_device {
>        * Root directory for debugfs files.
>        */
>       struct dentry *debugfs_root;
> +
> +     /**
> +      * @reset_phase:
> +      *
> +      * Reset phase that the device is in.
> +      */
> +     enum drm_kms_reset_phase reset_phase;
>  };
>  
>  void drm_dev_set_dma_dev(struct drm_device *dev, struct device *dma_dev);

Reply via email to