On 1/8/26 4:43 AM, Barnabás Czémán wrote: > Document ovp values supported by wled found in PMI8994. > > Reviewed-by: Konrad Dybcio <[email protected]>
I reviewed a version of this that said PMI8950, which is very much not the same.. Let me try and get some more docs to confirm or deny what you're saying.. Konrad > Signed-off-by: Barnabás Czémán <[email protected]> > --- > .../bindings/leds/backlight/qcom-wled.yaml | 22 > ++++++++++++++++++++-- > 1 file changed, 20 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > index a8490781011d..19166186a1ff 100644 > --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml > @@ -98,8 +98,8 @@ properties: > description: | > Over-voltage protection limit. This property is for WLED4 only. > $ref: /schemas/types.yaml#/definitions/uint32 > - enum: [ 18100, 19600, 29600, 31100 ] > - default: 29600 > + minimum: 17800 > + maximum: 31100 > > qcom,num-strings: > description: | > @@ -239,6 +239,24 @@ allOf: > minimum: 0 > maximum: 4095 > > + - if: > + properties: > + compatible: > + contains: > + const: qcom,pmi8994-wled > + > + then: > + properties: > + qcom,ovp-millivolt: > + enum: [ 17800, 19400, 29500, 31000 ] > + default: 29500 > + > + else: > + properties: > + qcom,ovp-millivolt: > + enum: [ 18100, 19600, 29600, 31100 ] > + default: 29600 > + > required: > - compatible > - reg >
