On Fri, Dec 05, 2025 at 03:59:09PM +0530, Akhil P Oommen wrote:
> On 12/4/2025 7:49 PM, Dmitry Baryshkov wrote:
> > On Thu, Dec 04, 2025 at 03:43:33PM +0530, Akhil P Oommen wrote:
> >> On 11/26/2025 6:12 AM, Dmitry Baryshkov wrote:
> >>> On Sat, Nov 22, 2025 at 03:03:10PM +0100, Konrad Dybcio wrote:
> >>>> On 11/21/25 10:52 PM, Akhil P Oommen wrote:
> >>>>> From: Jie Zhang <[email protected]>
> >>>>>
> >>>>> Add gpu and rgmu nodes for qcs615 chipset.
> >>>>>
> >>>>> Signed-off-by: Jie Zhang <[email protected]>
> >>>>> Signed-off-by: Akhil P Oommen <[email protected]>
> >>>>> ---
> >>>>
> >>>> [...]
> >>>>
> >>>>> +                       gpu_opp_table: opp-table {
> >>>>> +                               compatible = "operating-points-v2";
> >>>>> +
> >>>>> +                               opp-845000000 {
> >>>>> +                                       opp-hz = /bits/ 64 <845000000>;
> >>>>> +                                       required-opps = 
> >>>>> <&rpmhpd_opp_turbo>;
> >>>>> +                                       opp-peak-kBps = <7050000>;
> >>>>> +                               };
> >>>>
> >>>> I see another speed of 895 @ turbo_l1, perhaps that's for speedbins
> >>>> or mobile parts specifically?
> >>>
> >>> msm-4.14 defines 7 speedbins for SM6150. Akhil, I don't see any of them
> >>> here.
> >>
> >> The IoT/Auto variants have a different frequency plan compared to the
> >> mobile variant. I reviewed the downstream code and this aligns with that
> >> except the 290Mhz corner. We can remove that one.
> >>
> >> Here we are describing the IoT variant of Talos. So we can ignore the
> >> speedbins from the mobile variant until that is supported.
> > 
> > No, we are describing just Talos, which hopefully covers both mobile and
> > non-mobile platforms.
> 
> We cannot assume that.
> 
> Even if we assume that there is no variation in silicon, the firmware
> (AOP, TZ, HYP etc) is different between mobile and IoT version. So it is
> wise to use the configuration that is commercialized, especially when it
> is power related.

How does it affect the speed bins? I'd really prefer if we:
- describe OPP tables and speed bins here
- remove speed bins cell for the Auto / IoT boards
- make sure that the driver uses the IoT bin if there is no speed bin
  declared in the GPU.

-- 
With best wishes
Dmitry

Reply via email to