Hi,
On 02/12/2025 21:02, Linus Walleij wrote: > commit c9b1150a68d9362a0827609fc0dc1664c0d8bfe1 > "drm/atomic-helper: Re-order bridge chain pre-enable and post-disable" > caused a series of regressions in all panels that send > DSI commands in their .prepare() and .unprepare() > callbacks when used with the Rockchip driver. > > As the CRTC is no longer online at bridge_pre_enable() > and gone at brige_post_disable() which maps to the panel > bridge .prepare()/.unprepare() callbacks, any CRTC that > enable/disable the DSI transmitter in it's enable/disable > callbacks will be unable to send any DSI commands in the > .prepare() and .unprepare() callbacks. > > However the Rockchip driver definitely need the CRTC to be > enabled during .prepare()/.unprepare(). > > Solve this by implementing a custom commit tail function > in the Rockchip driver that always enables the CRTC first > and disables it last, using the newly exported helpers. > > This patch is an edited carbon-copy of the same patch to > the ST-Ericsson MCDE driver. > > Link: > https://lore.kernel.org/all/caamcf8di8sc_xvzanzq9suiuf-ayvg2yjhx2dwmvvcnff3p...@mail.gmail.com/ > Reported-by: Aradhya Bhatia <[email protected]> > Reported-by: Vicente Bergas <[email protected]> > Signed-off-by: Linus Walleij <[email protected]> > --- > Rockchip people: can you please test this patch (along > with patch 1 of course). > --- > drivers/gpu/drm/rockchip/rockchip_drm_fb.c | 50 > +++++++++++++++++++++++++++++- > 1 file changed, 49 insertions(+), 1 deletion(-) > Acked-by: Aradhya Bhatia <[email protected]>
