Hi Aradhya,

On 10/6/2025 11:30 PM, Aradhya Bhatia wrote:
> +rockchip maintainers
> 
> Hi Vicente, all,
> 
> 
> I went through the drivers and the affected areas in the gru-kevin
> chromebook pipeline last week, but nothing has stood out.
> 
> 
> Pipeline:
> 
> rockchip,display-subsystem / rk3399-vop (Big/Lite) (CRTC) ->
> rk3399-edp (Encoder) -> analogix_dp_core (Bridge) ->
> sharp,lq123p (edp-panel)
> 
> I am unable to debug this further since I do not have the hardware.
> 
> I could use some help, especially from folks who understand the hardware
> requirements better.
> 
>

Sorry for late reply. Could you please try the patch in the
attachment? I think this should work without PSR. Thank you.

-- 
Best, 
Chaoyi
From ae2f62f1e738b22d6f0724e3dd14df3fde5ae434 Mon Sep 17 00:00:00 2001
From: Chaoyi Chen <[email protected]>
Date: Wed, 3 Dec 2025 11:29:43 +0800
Subject: [PATCH] drm/bridge: analogix_dp: Force prepare drm panel in
 pre_enable

Signed-off-by: Chaoyi Chen <[email protected]>
---
 drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 11 -----------
 1 file changed, 11 deletions(-)

diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c 
b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
index efe534977d12..2c4415fc1e6e 100644
--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
+++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c
@@ -1126,17 +1126,6 @@ static void analogix_dp_bridge_atomic_pre_enable(struct 
drm_bridge *bridge,
                                                 struct drm_atomic_state 
*old_state)
 {
        struct analogix_dp_device *dp = to_dp(bridge);
-       struct drm_crtc *crtc;
-       struct drm_crtc_state *old_crtc_state;
-
-       crtc = analogix_dp_get_new_crtc(dp, old_state);
-       if (!crtc)
-               return;
-
-       old_crtc_state = drm_atomic_get_old_crtc_state(old_state, crtc);
-       /* Don't touch the panel if we're coming back from PSR */
-       if (old_crtc_state && old_crtc_state->self_refresh_active)
-               return;
 
        drm_panel_prepare(dp->plat_data->panel);
 }
-- 
2.51.1

Reply via email to