Hi, this patchset adds the driver, dt-bindings and dt integration required to drive a parallel display on the i.MX93.
Since the i.MX91 register layout equals the one from the i.MX93, I added the support for both but tested only the i.MX93 use-case. This patchset depends on: - https://lore.kernel.org/all/20251201-v6-18-topic-imx93-blkctrl-v1-0-b57a72e60...@pengutronix.de/ @Conor Dooley I dropped your r-b tag since I added the 'bus-width' property. Regards, Marco Changelog: v5: - https://lore.kernel.org/all/[email protected]/ - Add bus-width support - rebase onto v6.18-rc1 - add review feedback (Alexander) - driver license "GPL v2" -> "GPL" (checkpatch) - make use of reg of-property - fix to short Kconfig description (checkpath) - add OF integration Signed-off-by: Marco Felsch <[email protected]> --- Liu Ying (2): dt-bindings: soc: imx93-media-blk-ctrl: Add PDFC subnode to schema and example drm/bridge: imx: Add i.MX93 parallel display format configuration support Marco Felsch (1): arm64: dts: imx93: Add parallel display output nodes .../bindings/soc/imx/fsl,imx93-media-blk-ctrl.yaml | 92 +++++++++ arch/arm64/boot/dts/freescale/imx91_93_common.dtsi | 57 ++++++ arch/arm64/boot/dts/freescale/imx93.dtsi | 12 ++ drivers/gpu/drm/bridge/imx/Kconfig | 11 + drivers/gpu/drm/bridge/imx/Makefile | 1 + drivers/gpu/drm/bridge/imx/imx93-pdfc.c | 225 +++++++++++++++++++++ 6 files changed, 398 insertions(+) --- base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787 change-id: 20251201-v6-18-topic-imx93-parallel-display-95f9234bf6cc Best regards, -- Marco Felsch <[email protected]>
