On Wed, Nov 26, 2025 at 01:12:40PM +0000, Pranjal Shrivastava wrote:
> On Tue, Nov 25, 2025 at 04:18:03PM -0800, Alex Mastro wrote:
> > On Thu, Nov 20, 2025 at 11:28:25AM +0200, Leon Romanovsky wrote:
> > > +static struct scatterlist *fill_sg_entry(struct scatterlist *sgl, size_t
> > > length,
> > > + dma_addr_t addr)
> > > +{
> > > + unsigned int len, nents;
> > > + int i;
> > > +
> > > + nents = DIV_ROUND_UP(length, UINT_MAX);
> > > + for (i = 0; i < nents; i++) {
> > > + len = min_t(size_t, length, UINT_MAX);
> > > + length -= len;
> > > + /*
> > > + * DMABUF abuses scatterlist to create a scatterlist
> > > + * that does not have any CPU list, only the DMA list.
> > > + * Always set the page related values to NULL to ensure
> > > + * importers can't use it. The phys_addr based DMA API
> > > + * does not require the CPU list for mapping or unmapping.
> > > + */
> > > + sg_set_page(sgl, NULL, 0, 0);
> > > + sg_dma_address(sgl) = addr + i * UINT_MAX;
> >
> > (i * UINT_MAX) happens in 32-bit before being promoted to dma_addr_t for
> > addition with addr. Overflows for i >=2 when length >= 8 GiB. Needs a cast:
> >
> > sg_dma_address(sgl) = addr + (dma_addr_t)i * UINT_MAX;
> >
> > Discovered this while debugging why dma-buf import was failing for
> > an 8 GiB dma-buf using my earlier toy program [1]. It was surfaced by
> > ib_umem_find_best_pgsz() returning 0 due to malformed scatterlist, which
> > bubbles
> > up as an EINVAL.
> >
>
> Thanks a lot for testing & reporting this!
>
> However, I believe the casting approach is a little fragile (and
> potentially prone to issues depending on how dma_addr_t is sized on
> different platforms). Thus, approaching this with accumulation seems
> better as it avoids the multiplication logic entirely, maybe something
> like the following (untested) diff ?
If the function input range is well-formed, then all values in
[addr..addr+length) must be expressible by dma_addr_t, so I don't think overflow
after casting is possible as long as nents is valid.
That said, `nents = DIV_ROUND_UP(length, UINT_MAX)` is simply broken on any
system where size_t is 32b. I don't know if that's a practical consideration for
these code paths though.
>
> --- a/drivers/dma-buf/dma-buf-mapping.c
> +++ b/drivers/dma-buf/dma-buf-mapping.c
> @@ -252,14 +252,14 @@ static struct scatterlist *fill_sg_entry(struct
> scatterlist *sgl, size_t length,
> nents = DIV_ROUND_UP(length, UINT_MAX);
> for (i = 0; i < nents; i++) {
> len = min_t(size_t, length, UINT_MAX);
> - length -= len;
> /*
> * DMABUF abuses scatterlist to create a scatterlist
> * that does not have any CPU list, only the DMA list.
> * Always set the page related values to NULL to ensure
> * importers can't use it. The phys_addr based DMA API
> * does not require the CPU list for mapping or unmapping.
> */
> sg_set_page(sgl, NULL, 0, 0);
> - sg_dma_address(sgl) = addr + i * UINT_MAX;
> + sg_dma_address(sgl) = addr;
> sg_dma_len(sgl) = len;
> +
> + addr += len;
> + length -= len;
> sgl = sg_next(sgl);
> }
>
> Thanks,
> Praan
