On Thu, Oct 23, 2025 at 10:24:26PM +0200, David Heidelberg via B4 Relay wrote: > From: David Heidelberg <[email protected]> > > Add panel driver used in the OnePlus 6T. > > No datasheet, based mostly on EDK2 init sequence and the downstream driver. > > Note: This driver doesn't use previously mentioned "samsung,s6e3fc2x01" > by OnePlus 6T device-tree. > The reason is because DDIC itself without knowing the panel type used > with it will not give the driver enough information about the panel used, > as the panel cannot be autodetected. > While would be more practical to support the original compatible, > I would like to avoid it, to prevent confusing devs upstreaming DDICs. > > Based on work of: > Casey Connolly <[email protected]> > Joel Selvaraj <[email protected]> > Nia Espera <[email protected]> > > Signed-off-by: David Heidelberg <[email protected]> > --- > MAINTAINERS | 1 + > drivers/gpu/drm/panel/Kconfig | 13 + > drivers/gpu/drm/panel/Makefile | 1 + > drivers/gpu/drm/panel/panel-samsung-s6e3fc2x01.c | 385 > +++++++++++++++++++++++ > 4 files changed, 400 insertions(+) >
Reviewed-by: Dmitry Baryshkov <[email protected]> -- With best wishes Dmitry
