On Sun, 5 Oct 2025 at 19:49, Ayushi Makhija <[email protected]> wrote:
>
> On 9/26/2025 3:32 AM, Dmitry Baryshkov wrote:
> > On Thu, Sep 25, 2025 at 11:06:01AM +0530, Ayushi Makhija wrote:
> >> Add device tree nodes for the DSI0 controller with their corresponding
> >> PHY found on Qualcomm QCS8300 SoC.
> >>
> >> Signed-off-by: Ayushi Makhija <[email protected]>
> >> ---
> >>  arch/arm64/boot/dts/qcom/qcs8300.dtsi | 95 ++++++++++++++++++++++++++-
> >>  1 file changed, 94 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi 
> >> b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> >> index e0e1f63fc45b..834ae0522f2f 100644
> >> --- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> >> +++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
> >> @@ -3,6 +3,7 @@
> >>   * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights 
> >> reserved.
> >>   */
> >>
> >> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
> >>  #include <dt-bindings/clock/qcom,qcs8300-gcc.h>
> >>  #include <dt-bindings/clock/qcom,rpmh.h>
> >>  #include <dt-bindings/clock/qcom,sa8775p-camcc.h>
> >> @@ -4854,6 +4855,13 @@ dpu_intf0_out: endpoint {
> >>                                                      remote-endpoint = 
> >> <&mdss_dp0_in>;
> >>                                              };
> >>                                      };
> >> +
> >> +                                    port@1 {
> >> +                                            reg = <1>;
> >> +                                            dpu_intf1_out: endpoint {
> >> +                                                    remote-endpoint = 
> >> <&mdss_dsi0_in>;
> >> +                                            };
> >> +                                    };
> >>                              };
> >>
> >>                              mdp_opp_table: opp-table {
> >> @@ -4881,6 +4889,89 @@ opp-650000000 {
> >>                              };
> >>                      };
> >>
> >> +                    mdss_dsi0: dsi@ae94000 {
> >> +                            compatible =  
> >> "qcom,sa8775p-dsi-ctrl","qcom,mdss-dsi-ctrl";
> >
> > qcom,qcs8300-dsi-ctrl. You might use three compatibles (qcs8300, sa8775p
> > and the generic one), but there should be qcs8300 one.
> >
>
> Hi Dmitry,
>
> If I am adding three compatible string for ctrl,
>
> compatible = "qcom,qcs8300-dsi-ctrl",
>              "qcom,sa8775p-dsi-ctrl",
>              "qcom,mdss-dsi-ctrl";
>
> while validating dt-binding and dtsi against dt-schema. I am getting below 
> errors
>
>
> /local/mnt/workspace/amakhija/linux_next/linux/arch/arm64/boot/dts/qcom/qcs8300-ride.dtb:
>  dsi@ae94000: compatible: 'oneOf' conditional failed, one must be fixed:
>         ['qcom,qcs8300-dsi-ctrl', 'qcom,sa8775p-dsi-ctrl', 
> 'qcom,mdss-dsi-ctrl'] is too long
>         'qcom,qcs8300-dsi-ctrl' is not one of ['qcom,dsi-ctrl-6g-qcm2290', 
> 'qcom,mdss-dsi-ctrl']
>         'qcom,mdss-dsi-ctrl' was expected
>         from schema $id: 
> http://devicetree.org/schemas/display/msm/dsi-controller-main.yaml#
>
> According to the dsi-controller-main.yaml schema only two strings are allowed 
> one is the SOC specific and other one is generic "qcom,mdss-dsi-ctrl".
>
> Shall I keep only two strings qcom,qcs8300-mdss.yaml and the generic one 
> "qcom,mdss-dsi-ctrl" or if we want to support 3 strings in compatible sting 
> we need to modify the dsi-controller-main.yaml ?

Of course.

> Similarly, I am getting error for dsi_phy compatible string only one SOC 
> specific compatible string is allow.

So, what's the question? You are adding support for the platform. So
yes, you need to modify the schema.

-- 
With best wishes
Dmitry

Reply via email to