On 9/26/25 10:59 AM, Mani Chandana Ballary Kuntumalla wrote:
> Add device tree nodes for the mdss1 DPTX0 and DPTX1 controllers
> with their corresponding PHYs.
>
> Signed-off-by: Mani Chandana Ballary Kuntumalla <[email protected]>
> ---
[...]
> + mdss1_dp0: displayport-controller@22154000 {
> + compatible = "qcom,sa8775p-dp";
> +
> + reg = <0x0 0x22154000 0x0 0x104>,
sz = 0x200
> + <0x0 0x22154200 0x0 0x0c0>,
sz = 0x200
> + <0x0 0x22155000 0x0 0x770>,
sz = 0xc00> + <0x0 0x22156000 0x0 0x09c>,
> + <0x0 0x22157000 0x0 0x09c>,
> + <0x0 0x22158000 0x0 0x09c>,
> + <0x0 0x22159000 0x0 0x09c>,
sz = 0x400 for all 0x9c
> + <0x0 0x2215a000 0x0 0x23c>,
> + <0x0 0x2215b000 0x0 0x23c>;
0x23c -> 0x600
[...]
> + mdss1_dp1: displayport-controller@2215c000 {
> + compatible = "qcom,sa8775p-dp";
> +
> + reg = <0x0 0x2215c000 0x0 0x104>,
> + <0x0 0x2215c200 0x0 0x0c0>,
> + <0x0 0x2215d000 0x0 0x770>,
> + <0x0 0x2215e000 0x0 0x09c>,
> + <0x0 0x2215f000 0x0 0x09c>,
> + <0x0 0x22160000 0x0 0x09c>,
> + <0x0 0x22161000 0x0 0x09c>,
> + <0x0 0x22162000 0x0 0x23c>,
> + <0x0 0x22163000 0x0 0x23c>;
0x2216_2000 and _3000 don't exist, there's no MST2/3
sizes should be changed similarly
[...]
> dispcc1: clock-controller@22100000 {
> @@ -6872,6 +7115,8 @@ dispcc1: clock-controller@22100000 {
> <&rpmhcc RPMH_CXO_CLK>,
> <&rpmhcc RPMH_CXO_CLK_A>,
> <&sleep_clk>,
> + <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>,
> + <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>,
> <0>, <0>, <0>, <0>,
You need to remove the same amount of zeroes that you added
Konrad
> <0>, <0>, <0>, <0>;
> power-domains = <&rpmhpd SA8775P_MMCX>;
