On 9/5/25 5:02 PM, Rob Herring (Arm) wrote:
On Thu, 04 Sep 2025 23:01:21 +0200, Marek Vasut wrote:
This controller can have both bridges and panels connected to it. In
order to describe panels properly in DT, pull in dsi-controller.yaml
and disallow only unevaluatedProperties, because the panel node is
optional. Include example binding with panel.
Signed-off-by: Marek Vasut <[email protected]>
---
Cc: Conor Dooley <[email protected]>
Cc: David Airlie <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: Kieran Bingham <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Laurent Pinchart <[email protected]>
Cc: Neil Armstrong <[email protected]>
Cc: Rob Herring <[email protected]>
Cc: Robert Foss <[email protected]>
Cc: Simona Vetter <[email protected]>
Cc: Thomas Zimmermann <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
V2: Drop the dsi0: and dsi1: controller labels
---
.../display/bridge/renesas,dsi-csi2-tx.yaml | 53 ++++++++++++++++++-
1 file changed, 51 insertions(+), 2 deletions(-)
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb:
panel@0 (raspberrypi,dsi-7inch): 'port' does not match any of the regexes:
'^pinctrl-[0-9]+$'
from schema $id:
http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb:
panel@0 (raspberrypi,dsi-7inch): compatible: ['raspberrypi,dsi-7inch'] is too
short
from schema $id:
http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/display/bridge/renesas,dsi-csi2-tx.example.dtb:
panel@0 (raspberrypi,dsi-7inch): 'power-supply' is a required property
from schema $id:
http://devicetree.org/schemas/display/panel/ilitek,ili9881c.yaml#
doc reference errors (make refcheckdocs):
See
https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
I suspect this is already fixed in
[PATCH] dt-bindings: ili9881c: Allow port subnode
which updates the ili9881c/rpi panel binding a bit, to allow port subnode .
