[PATCH] drm: call connector dpms fxn, when setting config

[Rob Clark]

From: Rob Clark <r...@ti.com>

Call connector->funcs->dpms(DPMS_ON) rather than just setting
connector->dpms = DPMS_ON.  This ensures that if the connector
has something to do to enable the output (rather than just using
drm_helper_connector_dpms helper directly), that this happens
at bootup.  This solves an issue with connectors not getting
enabled from fbcon_init() when the driver is loaded.

Signed-off-by: Rob Clark <rob at ti.com>
---
 drivers/gpu/drm/drm_crtc_helper.c |    2 +-
 1 files changed, 1 insertions(+), 1 deletions(-)

diff --git a/drivers/gpu/drm/drm_crtc_helper.c 
b/drivers/gpu/drm/drm_crtc_helper.c
index d2619d7..2f1ec7c 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -710,7 +710,7 @@ int drm_crtc_helper_set_config(struct drm_mode_set *set)
                        for (i = 0; i < set->num_connectors; i++) {
                                DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS 
on\n", set->connectors[i]->base.id,
                                              
drm_get_connector_name(set->connectors[i]));
-                               set->connectors[i]->dpms = DRM_MODE_DPMS_ON;
+                               
set->connectors[i]->funcs->dpms(set->connectors[i], DRM_MODE_DPMS_ON);
                        }
                }
                drm_helper_disable_unused_functions(dev);
-- 
1.7.5.4