There's no reason to relock them; it just makes operations more
complex. This fixes DPMS where the panel registers were locked making
the disable not work.
Signed-off-by: Keith Packard <keithp at keithp.com>
---
drivers/gpu/drm/i915/intel_lvds.c | 51 +++++++++++-------------------------
1 files changed, 16 insertions(+), 35 deletions(-)
diff --git a/drivers/gpu/drm/i915/intel_lvds.c
b/drivers/gpu/drm/i915/intel_lvds.c
index 6318828..8b521a2 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -400,53 +400,21 @@ out:
static void intel_lvds_prepare(struct drm_encoder *encoder)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
- /* We try to do the minimum that is necessary in order to unlock
- * the registers for mode setting.
- *
- * On Ironlake, this is quite simple as we just set the unlock key
- * and ignore all subtleties. (This may cause some issues...)
- *
+ /*
* Prior to Ironlake, we must disable the pipe if we want to adjust
* the panel fitter. However at all other times we can just reset
* the registers regardless.
*/
-
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(PCH_PP_CONTROL,
- I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
- } else if (intel_lvds->pfit_dirty) {
- I915_WRITE(PP_CONTROL,
- (I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS)
- & ~POWER_TARGET_ON);
- } else {
- I915_WRITE(PP_CONTROL,
- I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
- }
+ if (!HAS_PCH_SPLIT(encoder->dev) && intel_lvds->pfit_dirty)
+ intel_lvds_disable(intel_lvds);
}
static void intel_lvds_commit(struct drm_encoder *encoder)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
- /* Undo any unlocking done in prepare to prevent accidental
- * adjustment of the registers.
- */
- if (HAS_PCH_SPLIT(dev)) {
- u32 val = I915_READ(PCH_PP_CONTROL);
- if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)
- I915_WRITE(PCH_PP_CONTROL, val & 0x3);
- } else {
- u32 val = I915_READ(PP_CONTROL);
- if ((val & PANEL_UNLOCK_REGS) == PANEL_UNLOCK_REGS)
- I915_WRITE(PP_CONTROL, val & 0x3);
- }
-
/* Always do a full power on as we do not know what state
* we were left in.
*/
@@ -1042,6 +1010,19 @@ out:
pwm = I915_READ(BLC_PWM_PCH_CTL1);
pwm |= PWM_PCH_ENABLE;
I915_WRITE(BLC_PWM_PCH_CTL1, pwm);
+ /*
+ * Unlock registers and just
+ * leave them unlocked
+ */
+ I915_WRITE(PCH_PP_CONTROL,
+ I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
+ } else {
+ /*
+ * Unlock registers and just
+ * leave them unlocked
+ */
+ I915_WRITE(PP_CONTROL,
+ I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
}
dev_priv->lid_notifier.notifier_call = intel_lid_notify;
if (acpi_lid_notifier_register(&dev_priv->lid_notifier)) {
--
1.7.5.4
--
keith.packard at intel.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 189 bytes
Desc: not available
URL:
<http://lists.freedesktop.org/archives/dri-devel/attachments/20110808/ab91b885/attachment.pgp>
