On 12.02.2025 3:35 PM, Rob Herring wrote: > On Wed, Feb 12, 2025 at 03:12:23PM +0800, Yongxing Mou wrote: >> This series of patches introduces how to enable MST functionality on >> the qcs8300 platform. The qcs8300 platform uses dpu_8_4 hardware, which >> is the same as the sa8775p, but it only has one DPU. So it only has one >> DP0 controller, supporting 4-stream MST. This patch only enables >> 2-stream MST, using intf0 and intf3. The first and second patches are >> modifications to the correspond dt-bindings, third patch is the dp >> controller driver after not reuse sm8650, fourth patch is the qcs8300 >> dts modification which add the clk support for stream 1. >> >> Signed-off-by: Yongxing Mou <[email protected]> >> --- >> This patch depends on following series: >> https://lore.kernel.org/all/[email protected]/ >> https://lore.kernel.org/all/[email protected]/ >> https://lore.kernel.org/all/[email protected] >> https://lore.kernel.org/all/[email protected]/ >> >> --- >> Yongxing Mou (4): >> dt-bindings: display/msm: Redocument the dp-controller for QCS8300 >> dt-bindings: display/msm: Add stream 1 pixel clock for QCS8300 >> drm/msm/dp: Populate the max_streams for qcs8300 mst controller >> arm64: dts: qcom: qcs8300: Add support for stream 1 clk for DP MST >> >> .../devicetree/bindings/display/msm/dp-controller.yaml | 5 +---- >> .../devicetree/bindings/display/msm/qcom,qcs8300-mdss.yaml | 14 >> ++++++++------ >> arch/arm64/boot/dts/qcom/qcs8300.dtsi | 12 ++++++++---- >> drivers/gpu/drm/msm/dp/dp_display.c | 8 ++++++++ >> 4 files changed, 25 insertions(+), 14 deletions(-) >> --- >> base-commit: 7ba9bcc5090556c007d9a718d7176e097fe54f19 > > Your series doesn't apply because this commit doesn't exist in any repo > I have.
Please refrain from merging this revision, we found some issues Konrad
