On Mon, Dec 16, 2024 at 11:12:24AM +0800, Damon Ding wrote:
> Add the necessary DT changes to enable eDP0 on RK3588S EVB1 board:
> - Add edp-panel node
> - Set pinctrl of pwm12 for backlight
> - Enable edp0/hdptxphy0/vp2
>
> Signed-off-by: Damon Ding <[email protected]>
>
> ---
>
> Changes in v2:
> - Remove brightness-levels and default-brightness-level properties in
> backlight node.
> - Add the detail DT changes to commit message.
> ---
> .../boot/dts/rockchip/rk3588s-evb1-v10.dts | 50 +++++++++++++++++++
> 1 file changed, 50 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> index bc4077575beb..5c1ea25b6524 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-evb1-v10.dts
> @@ -9,6 +9,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> #include <dt-bindings/usb/pd.h>
> #include "rk3588s.dtsi"
>
> @@ -120,6 +121,18 @@ backlight: backlight {
> pwms = <&pwm12 0 25000 0>;
> };
>
> + edp_panel: edp-panel {
> + compatible = "lg,lp079qx1-sp0v";
Please use aux-bus and a generic "edp-panel" entry for newer platforms
instead of declaring the panel on the platform bus. Placing eDP panels
on the platform bus has been deprecated for quite a while.
> + backlight = <&backlight>;
> + power-supply = <&vcc3v3_lcd_edp>;
> +
> + port {
> + panel_in_edp: endpoint {
> + remote-endpoint = <&edp_out_panel>;
> + };
> + };
> + };
> +
> combophy_avdd0v85: regulator-combophy-avdd0v85 {
> compatible = "regulator-fixed";
> regulator-name = "combophy_avdd0v85";
--
With best wishes
Dmitry
