On 19/11/24 - 14:34, Louis Chauvet wrote:
> VKMS currently supports only one CRTC, so it make no sense to have this
> index configurable. To avoid issues, replace this hardcoded index by
> drm_crtc_mask when applicable.
> 
> There is no need to manually set a crtc mask on primary and cursor plane
> as it is automatically set by drmm_crtc_alloc_with_planes.
> 
> In addition, this will remove the use of an uninitialized structure in
> vkms_add_overlay_plane. This currently works by chance because two things:
> - vkms_plane_init always set a possible_crtcs value, so the problematic
>   branch is never used;
> - drm_crtc_mask on an kzalloc'd drm_crtc returns BIT(0), and the VKMS CRTC
>   always have this id.
> 
> Signed-off-by: Louis Chauvet <[email protected]>

Hi Maíra, José,

You told me "LGTM" for the v2, but without leaving a Acked/Reviewed-by, 
should I add them? Or maybe you prefer to formally send them now?

Thanks,
Louis Chauvet

> ---
> Changes in v3:
> - Rebased on drm-misc-next
> - Link to v2: 
> https://lore.kernel.org/r/[email protected]
> 
> Changes in v2:
> - Applied comments from José
> - Link to v1: 
> https://lore.kernel.org/r/[email protected]
> ---
>  drivers/gpu/drm/vkms/vkms_drv.c    |  2 +-
>  drivers/gpu/drm/vkms/vkms_drv.h    |  8 ++-----
>  drivers/gpu/drm/vkms/vkms_output.c | 49 
> +++++++++++++-------------------------
>  drivers/gpu/drm/vkms/vkms_plane.c  |  4 ++--
>  4 files changed, 21 insertions(+), 42 deletions(-)
> 
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.c b/drivers/gpu/drm/vkms/vkms_drv.c
> index 
> bab13943d8e0085bed85092d7bc8727d834768a9..e4ae69d9ef871c9ce436ad0bd8c6551d8fe7f55c
>  100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.c
> +++ b/drivers/gpu/drm/vkms/vkms_drv.c
> @@ -174,7 +174,7 @@ static int vkms_modeset_init(struct vkms_device *vkmsdev)
>       dev->mode_config.preferred_depth = 0;
>       dev->mode_config.helper_private = &vkms_mode_config_helpers;
>  
> -     return vkms_output_init(vkmsdev, 0);
> +     return vkms_output_init(vkmsdev);
>  }
>  
>  static int vkms_create(struct vkms_config *config)
> diff --git a/drivers/gpu/drm/vkms/vkms_drv.h b/drivers/gpu/drm/vkms/vkms_drv.h
> index 
> 672fe191e239c03e7358d43eb19215361417a781..036101ee4ea1cb0a335cd2ea78a8ca9da87fbe93
>  100644
> --- a/drivers/gpu/drm/vkms/vkms_drv.h
> +++ b/drivers/gpu/drm/vkms/vkms_drv.h
> @@ -212,21 +212,17 @@ int vkms_crtc_init(struct drm_device *dev, struct 
> drm_crtc *crtc,
>   * vkms_output_init() - Initialize all sub-components needed for a VKMS 
> device.
>   *
>   * @vkmsdev: VKMS device to initialize
> - * @index: CRTC which can be attached to the planes. The caller must ensure 
> that
> - *      @index is positive and less or equals to 31.
>   */
> -int vkms_output_init(struct vkms_device *vkmsdev, int index);
> +int vkms_output_init(struct vkms_device *vkmsdev);
>  
>  /**
>   * vkms_plane_init() - Initialize a plane
>   *
>   * @vkmsdev: VKMS device containing the plane
>   * @type: type of plane to initialize
> - * @index: CRTC which can be attached to the plane. The caller must ensure 
> that
> - *      @index is positive and less or equals to 31.
>   */
>  struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> -                                enum drm_plane_type type, int index);
> +                                enum drm_plane_type type);
>  
>  /* CRC Support */
>  const char *const *vkms_get_crc_sources(struct drm_crtc *crtc,
> diff --git a/drivers/gpu/drm/vkms/vkms_output.c 
> b/drivers/gpu/drm/vkms/vkms_output.c
> index 
> 25a99fde126c7402941954015287ab0887484139..8f4bd5aef087b459d37d0cbbf90fe0145090917a
>  100644
> --- a/drivers/gpu/drm/vkms/vkms_output.c
> +++ b/drivers/gpu/drm/vkms/vkms_output.c
> @@ -32,29 +32,14 @@ static const struct drm_connector_helper_funcs 
> vkms_conn_helper_funcs = {
>       .get_modes    = vkms_conn_get_modes,
>  };
>  
> -static int vkms_add_overlay_plane(struct vkms_device *vkmsdev, int index,
> -                               struct drm_crtc *crtc)
> -{
> -     struct vkms_plane *overlay;
> -
> -     overlay = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_OVERLAY, index);
> -     if (IS_ERR(overlay))
> -             return PTR_ERR(overlay);
> -
> -     if (!overlay->base.possible_crtcs)
> -             overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> -
> -     return 0;
> -}
> -
> -int vkms_output_init(struct vkms_device *vkmsdev, int index)
> +int vkms_output_init(struct vkms_device *vkmsdev)
>  {
>       struct vkms_output *output = &vkmsdev->output;
>       struct drm_device *dev = &vkmsdev->drm;
>       struct drm_connector *connector = &output->connector;
>       struct drm_encoder *encoder = &output->encoder;
>       struct drm_crtc *crtc = &output->crtc;
> -     struct vkms_plane *primary, *cursor = NULL;
> +     struct vkms_plane *primary, *overlay, *cursor = NULL;
>       int ret;
>       int writeback;
>       unsigned int n;
> @@ -65,29 +50,31 @@ int vkms_output_init(struct vkms_device *vkmsdev, int 
> index)
>        * The overlay and cursor planes are not mandatory, but can be used to 
> perform complex
>        * composition.
>        */
> -     primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY, index);
> +     primary = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_PRIMARY);
>       if (IS_ERR(primary))
>               return PTR_ERR(primary);
>  
> -     if (vkmsdev->config->overlay) {
> -             for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> -                     ret = vkms_add_overlay_plane(vkmsdev, index, crtc);
> -                     if (ret)
> -                             return ret;
> -             }
> -     }
> -
>       if (vkmsdev->config->cursor) {
> -             cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR, index);
> +             cursor = vkms_plane_init(vkmsdev, DRM_PLANE_TYPE_CURSOR);
>               if (IS_ERR(cursor))
>                       return PTR_ERR(cursor);
>       }
>  
> -     /* [1]: Allocation of a CRTC, its index will be BIT(0) = 1 */
>       ret = vkms_crtc_init(dev, crtc, &primary->base, &cursor->base);
>       if (ret)
>               return ret;
>  
> +     if (vkmsdev->config->overlay) {
> +             for (n = 0; n < NUM_OVERLAY_PLANES; n++) {
> +                     overlay = vkms_plane_init(vkmsdev, 
> DRM_PLANE_TYPE_OVERLAY);
> +                     if (IS_ERR(overlay)) {
> +                             DRM_DEV_ERROR(dev->dev, "Failed to init vkms 
> plane\n");
> +                             return PTR_ERR(overlay);
> +                     }
> +                     overlay->base.possible_crtcs = drm_crtc_mask(crtc);
> +             }
> +     }
> +
>       ret = drm_connector_init(dev, connector, &vkms_connector_funcs,
>                                DRM_MODE_CONNECTOR_VIRTUAL);
>       if (ret) {
> @@ -103,11 +90,7 @@ int vkms_output_init(struct vkms_device *vkmsdev, int 
> index)
>               DRM_ERROR("Failed to init encoder\n");
>               goto err_encoder;
>       }
> -     /*
> -      * This is a hardcoded value to select crtc for the encoder.
> -      * BIT(0) here designate the first registered CRTC, the one allocated 
> in [1]
> -      */
> -     encoder->possible_crtcs = BIT(0);
> +     encoder->possible_crtcs = drm_crtc_mask(crtc);
>  
>       ret = drm_connector_attach_encoder(connector, encoder);
>       if (ret) {
> diff --git a/drivers/gpu/drm/vkms/vkms_plane.c 
> b/drivers/gpu/drm/vkms/vkms_plane.c
> index 
> e5c625ab8e3e06cb95f468c59bc3b06ef85eab6f..ad137c9a75f5e9ee3bb62e7bb2c5e3684a6ecbb6
>  100644
> --- a/drivers/gpu/drm/vkms/vkms_plane.c
> +++ b/drivers/gpu/drm/vkms/vkms_plane.c
> @@ -198,12 +198,12 @@ static const struct drm_plane_helper_funcs 
> vkms_plane_helper_funcs = {
>  };
>  
>  struct vkms_plane *vkms_plane_init(struct vkms_device *vkmsdev,
> -                                enum drm_plane_type type, int index)
> +                                enum drm_plane_type type)
>  {
>       struct drm_device *dev = &vkmsdev->drm;
>       struct vkms_plane *plane;
>  
> -     plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 1 << 
> index,
> +     plane = drmm_universal_plane_alloc(dev, struct vkms_plane, base, 0,
>                                          &vkms_plane_funcs,
>                                          vkms_formats, 
> ARRAY_SIZE(vkms_formats),
>                                          NULL, type, NULL);
> 
> ---
> base-commit: 7d2faa8dbb7055a115fe0cd6068d7090094a573d
> change-id: 20240906-vkms-remove-index-3a6e04c38e02
> 
> Best regards,
> -- 
> Louis Chauvet <[email protected]>
> 

Reply via email to