Hi All,
V2 of this patch for this LCD panel used in Anbernic handheld devices, with
updated compatible string as agreed, in the format <device vendor>,<component
serial>.
Original blurb below:
The previous patch adding support for this panel [1] referred to previously by
its serial number only. As discussed after the patch was committed, the
preference is to use the integrating device vendor and name in this
circumstance.
This series corrects the panel compatible to reflect the vendor (Anbernic,
already in the vendor prefix table), updates the NV3052C panel driver with the
new compatible, and lastly adds num-chipselects and sck-gpios to the DT binding
example, identified by make dt_bindings_check as required for bit-banged SPI
over GPIO lines.
Ryan Walklin (3):
dt-bindings: display: panel: Rename WL-355608-A8 panel
drm: panel: nv3052c: Correct WL-355608-A8 panel compatible
dt-bindings: display: panel: correct Anbernic RG35XX panel example
.../{wl-355608-a8.yaml => anbernic,wl-355608-a8.yaml} | 11 +++++++----
drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 2 +-
2 files changed, 8 insertions(+), 5 deletions(-)
rename Documentation/devicetree/bindings/display/panel/{wl-355608-a8.yaml =>
anbernic,wl-355608-a8.yaml} (76%)
--
2.45.2
