Hi Neil,
On 2024-06-24 11:23, Neil Armstrong wrote:
> On 11/06/2024 17:50, Jonas Karlman wrote:
>> Change to only call poweron/poweroff from atomic_enable/atomic_disable
>> ops instead of trying to keep a bridge_is_on state and poweron/off in
>> the hotplug irq handler.
>>
>> A benefit of this is that drm mode_config mutex is always held at
>> poweron/off, something that may reduce the need for our own mutex.
>>
>> Signed-off-by: Jonas Karlman <[email protected]>
>> ---
>> drivers/gpu/drm/bridge/synopsys/dw-hdmi.c | 33 ++---------------------
>> 1 file changed, 2 insertions(+), 31 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> index 9f2bc932c371..34bc6f4754b8 100644
>> --- a/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> +++ b/drivers/gpu/drm/bridge/synopsys/dw-hdmi.c
>> @@ -172,7 +172,6 @@ struct dw_hdmi {
>> enum drm_connector_force force; /* mutex-protected force state */
>> struct drm_connector *curr_conn;/* current connector (only valid when
>> !disabled) */
>> bool disabled; /* DRM has disabled our bridge */
>> - bool bridge_is_on; /* indicates the bridge is on */
>> bool rxsense; /* rxsense state */
>> u8 phy_mask; /* desired phy int mask settings */
>> u8 mc_clkdis; /* clock disable register */
>> @@ -2383,8 +2382,6 @@ static void initialize_hdmi_ih_mutes(struct dw_hdmi
>> *hdmi)
>>
>> static void dw_hdmi_poweron(struct dw_hdmi *hdmi)
>> {
>> - hdmi->bridge_is_on = true;
>> -
>> /*
>> * The curr_conn field is guaranteed to be valid here, as this function
>> * is only be called when !hdmi->disabled.
>> @@ -2398,30 +2395,6 @@ static void dw_hdmi_poweroff(struct dw_hdmi *hdmi)
>> hdmi->phy.ops->disable(hdmi, hdmi->phy.data);
>> hdmi->phy.enabled = false;
>> }
>> -
>> - hdmi->bridge_is_on = false;
>> -}
>> -
>> -static void dw_hdmi_update_power(struct dw_hdmi *hdmi)
>> -{
>> - int force = hdmi->force;
>> -
>> - if (hdmi->disabled) {
>> - force = DRM_FORCE_OFF;
>> - } else if (force == DRM_FORCE_UNSPECIFIED) {
>> - if (hdmi->rxsense)
>> - force = DRM_FORCE_ON;
>> - else
>> - force = DRM_FORCE_OFF;
>> - }
>
> This means we always poweron the bridge even if rxsense is false ?
If I follow the logic there should not be any difference, beside that
power on now only happen in atomic_enable instead of sometime in irq
handler.
hdmi->rxsense is set to true based on hpd in dw_hdmi_setup_rx_sense().
For both meson and dw-hdmi this means HPD=1 and not rxsense=1.
drm core will call the force/detect ops and enable/disable based on
forced/HPD state, so I am not expecting any difference in how this
currently works.
This change to only poweron/setup in atomic_enable should also fix
issues/situations where dw-hdmi was poweron too early during bootup in
irq handler, before the drm driver was fully probed.
Regards,
Jonas
>
> Neil
>
>> -
>> - if (force == DRM_FORCE_OFF) {
>> - if (hdmi->bridge_is_on)
>> - dw_hdmi_poweroff(hdmi);
>> - } else {
>> - if (!hdmi->bridge_is_on)
>> - dw_hdmi_poweron(hdmi);
>> - }
>> }
>>
>> /*
>> @@ -2546,7 +2519,6 @@ static void dw_hdmi_connector_force(struct
>> drm_connector *connector)
>>
>> mutex_lock(&hdmi->mutex);
>> hdmi->force = connector->force;
>> - dw_hdmi_update_power(hdmi);
>> dw_hdmi_update_phy_mask(hdmi);
>> mutex_unlock(&hdmi->mutex);
>> }
>> @@ -2955,7 +2927,7 @@ static void dw_hdmi_bridge_atomic_disable(struct
>> drm_bridge *bridge,
>> mutex_lock(&hdmi->mutex);
>> hdmi->disabled = true;
>> hdmi->curr_conn = NULL;
>> - dw_hdmi_update_power(hdmi);
>> + dw_hdmi_poweroff(hdmi);
>> dw_hdmi_update_phy_mask(hdmi);
>> handle_plugged_change(hdmi, false);
>> mutex_unlock(&hdmi->mutex);
>> @@ -2974,7 +2946,7 @@ static void dw_hdmi_bridge_atomic_enable(struct
>> drm_bridge *bridge,
>> mutex_lock(&hdmi->mutex);
>> hdmi->disabled = false;
>> hdmi->curr_conn = connector;
>> - dw_hdmi_update_power(hdmi);
>> + dw_hdmi_poweron(hdmi);
>> dw_hdmi_update_phy_mask(hdmi);
>> handle_plugged_change(hdmi, true);
>> mutex_unlock(&hdmi->mutex);
>> @@ -3073,7 +3045,6 @@ void dw_hdmi_setup_rx_sense(struct dw_hdmi *hdmi, bool
>> hpd, bool rx_sense)
>> if (hpd)
>> hdmi->rxsense = true;
>>
>> - dw_hdmi_update_power(hdmi);
>> dw_hdmi_update_phy_mask(hdmi);
>> }
>> mutex_unlock(&hdmi->mutex);
>
