On 6/4/24 18:45, Barnabás Czémán wrote:
On Tue, Jun 4, 2024 at 2:27 PM Barnabás Czémán <[email protected]> wrote:
On Tue, Jun 4, 2024 at 1:55 PM Konrad Dybcio <[email protected]> wrote:
On 6/4/24 02:20, Barnabás Czémán wrote:
From: Daniil Titov <[email protected]>
This GPU is found on SoCs such as MSM8937 (450 MHz), MSM8940 (475 MHz),
SDM439 (650 MHz).
Signed-off-by: Daniil Titov <[email protected]>
Signed-off-by: Barnabás Czémán <[email protected]>
---
This all looks very good, just a nit
[...]
+ /*
+ * Increase inactive period to 250 to avoid bouncing
+ * the GDSC which appears to make it grumpy
+ */
+ .inactive_period = 250,
Are you sure this is actually necessary?
Every A5XX GPU is using the same value, but i have never tried with
DRM_MSM_INACTIVE_PERIOD.
This was the original patch
https://lore.kernel.org/all/[email protected]/
where the inactive period was increased for a530. I cannot test
suspend on msm8937 yet.
The suspend here refers to device suspend, not system suspend. Adreno
goes into device suspend every time you stop using it, i.e. after the
rendering is done and there's no more work to do.
I suppose a good test scenario here would be to keep running and closing
kmscube in a rapid fashion and checking if the GPU starts crashing for
unknown reasons (the dmesg would denote that)
I can check on msm8953 with a506 maybe if a506 works fine with
DRM_MSM_INACTIVE_PERIOD
then a505 would be fine with it also.
The more testing the merrier :)
Konrad
