Hi Johan,
Am 04.12.23 um 18:40 schrieb Johan Jonker:
Add hdmi-connector node to comply with the inno_hdmi binding.
Signed-off-by: Johan Jonker <[email protected]>
---
arch/arm/boot/dts/rockchip/rk3036-kylin.dts | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
index 67e1e04139e7..a213333be011 100644
--- a/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rockchip/rk3036-kylin.dts
@@ -13,6 +13,17 @@ memory@60000000 {
reg = <0x60000000 0x20000000>;
};
+ hdmi_con: hdmi-con {
+ compatible = "hdmi-connector";
+ type = "c";
According to [0], kylin has an A-Type HDMI port - so this should be
+ type = "a";
[0] http://rockchip.wikidot.com/kylin
Regards,
Alex
+
+ port {
+ hdmi_con_in: endpoint {
+ remote-endpoint = <&hdmi_out_con>;
+ };
+ };
+ };
+
leds: gpio-leds {
compatible = "gpio-leds";
@@ -110,6 +121,12 @@ &hdmi {
status = "okay";
};
+&hdmi_out {
+ hdmi_out_con: endpoint {
+ remote-endpoint = <&hdmi_con_in>;
+ };
+};
+
&i2c1 {
clock-frequency = <400000>;
--
2.39.2
_______________________________________________
Linux-rockchip mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-rockchip
