From: Karol Wachowski <[email protected]>
Buttress spec requires that the interrupt status is cleared at
the source first (before clearing MTL_BUTTRESS_INTERRUPT_STAT),
that implies that we have to mask out the global interrupt while
handling buttress interrupts.
Fixes: 79cdc56c4a54 ("accel/ivpu: Add initial support for VPU 4")
Signed-off-by: Karol Wachowski <[email protected]>
Signed-off-by: Stanislaw Gruszka <[email protected]>
---
drivers/accel/ivpu/ivpu_hw_40xx.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/accel/ivpu/ivpu_hw_40xx.c
b/drivers/accel/ivpu/ivpu_hw_40xx.c
index 34626d66fa10..00c5dbbe6847 100644
--- a/drivers/accel/ivpu/ivpu_hw_40xx.c
+++ b/drivers/accel/ivpu/ivpu_hw_40xx.c
@@ -1046,7 +1046,8 @@ static irqreturn_t ivpu_hw_40xx_irqb_handler(struct
ivpu_device *vdev, int irq)
if (status == 0)
return IRQ_NONE;
- REGB_WR32(VPU_40XX_BUTTRESS_INTERRUPT_STAT, status);
+ /* Disable global interrupt before handling local buttress interrupts */
+ REGB_WR32(VPU_40XX_BUTTRESS_GLOBAL_INT_MASK, 0x1);
if (REG_TEST_FLD(VPU_40XX_BUTTRESS_INTERRUPT_STAT, FREQ_CHANGE, status))
ivpu_dbg(vdev, IRQ, "FREQ_CHANGE");
@@ -1092,6 +1093,12 @@ static irqreturn_t ivpu_hw_40xx_irqb_handler(struct
ivpu_device *vdev, int irq)
schedule_recovery = true;
}
+ /* This must be done after interrupts are cleared at the source. */
+ REGB_WR32(VPU_40XX_BUTTRESS_INTERRUPT_STAT, status);
+
+ /* Re-enable global interrupt */
+ REGB_WR32(VPU_40XX_BUTTRESS_GLOBAL_INT_MASK, 0x0);
+
if (schedule_recovery)
ivpu_pm_schedule_recovery(vdev);
--
2.25.1
